|
Presados colaboradores; alguem ai pode imaginar, como pego esse tipo de informação do do mrtg, qual OID ? e qual o comando do mrtg ? no roteador show int serial 0 Serial1/0 is up, line protocol is up Hardware is M8T-V.35 Description: "BSA 819524 BSA/DISMEs/RNTM 2Mbit/s Frame-relay" MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec, reliability 255/255, txload 23/255, rxload 15/255 Encapsulation FRAME-RELAY, crc 16, loopback not set Keepalive set (10 sec) Restart-Delay is 0 secs LMI enq sent 671477, LMI stat recvd 671267, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:09, output 00:00:00, output hang never Last clearing of "show interface" counters 11w0d Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 176690 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 126000 bits/sec, 45 packets/sec 5 minute output rate 192000 bits/sec, 44 packets/sec 283864465 packets input, 3260864418 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 2 giants, 0 throttles 1156 input errors, 1106 CRC, 0 frame, 28 overrun, 16 ignored, 22 abort 300826591 packets output, 2631550566 bytes, 0 underruns 0 output errors, 0 collisions, 17 interface resets 0 output buffer failures, 0 output buffers swapped out preciso gerenciar gráfico desse tipo de informação no mrtg 0 output errors, 0 collisions, 17 interface resets no exemplo axima. obrigado |