carlucio:/usr/local/ltmodem-8.26a# lsmod Module Size Used by lt_serial 21184 0 (unused) lt_modem 480443 0 [lt_serial] carlucio:/usr/local/ltmodem-8.26a# carlucio:/usr/local/ltmodem-8.26a# pon ltmodem carlucio:/usr/local/ltmodem-8.26a# carlucio:/usr/local/ltmodem-8.26a# plog Jan 6 07:07:55 carlucio chat[1188]: abort on (DELAYED) Jan 6 07:07:55 carlucio chat[1188]: send (ATZ^M) Jan 6 07:07:55 carlucio chat[1188]: expect (OK) Jan 6 07:07:55 carlucio chat[1188]: ATZ^M^M Jan 6 07:07:55 carlucio chat[1188]: OK Jan 6 07:07:55 carlucio chat[1188]: -- got it Jan 6 07:07:55 carlucio chat[1188]: send (ATDT2374001^M) Jan 6 07:07:56 carlucio chat[1188]: expect (CONNECT) Jan 6 07:07:56 carlucio chat[1188]: ^M Jan 6 07:08:12 carlucio chat[1188]: ATDT2374001^M^M Jan 6 07:08:12 carlucio chat[1188]: NO DIALTONE Jan 6 07:08:12 carlucio chat[1188]: -- failed Jan 6 07:08:12 carlucio chat[1188]: Failed (NO DIALTONE) Jan 6 07:08:12 carlucio pppd[1187]: Connect script failed Jan 6 07:08:14 carlucio pppd[1187]: Exit. carlucio:/usr/local/ltmodem-8.26a# Carlucio Lopes- 62-9946-3523 62-526-8006 icq 267274130 msn carlinuxs@hotmail.com
Linux Newbies should check DOCs/Installers and if still necessary
http://www.heby.de/ltmodem for already available driver installers
Together with information included in DOCs/,
this report may enable you to solve problems.
But if further help is needed, send BLDrecord.txt to discuss@linmodems.org
Please use the following in the email Subject Line:
Lucent modem, debian 3.0 2.4.18lopes
DISTRO=debian_version
DISTR=debian
DVERSION=3.0
ACTION=./build_module
WHOAMI=root
Thu Jan 6 06:59:43 UTC 2005
Linux carlucio 2.4.18lopes #2 SMP Wed Jan 5 00:08:49 UTC 2005 i586 unknown
------------ beginning SCANMODEM section ------
assembled with compiler: 2.95.4
with current System compiler GCC=2.95.4
/usr/bin/gcc -> gcc-2.95
Modem symbolic link is: /dev/modem -> /dev/ttyLT0
COMM services are not active
PPP support module zlib_deflate..o not found!
All PPP support modules were found.
There are Debian packages with modem drivers from SmartLink:
sl-modem-daemon - SmartLink software modem daemon
sl-modem-source - SmartLink software modem driver - module building source
MANY modem subSystems serving under AC'97/MC97 Controllers are also supported.
An AC'97 modem codec was not detected
Path to lspci is: /sbin/lspci
--------- lspci scan ----------------
PCI_bus
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 530 Host (rev 02)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev b1)
00:01.1 Class ff00: Silicon Integrated Systems [SiS] ACPI
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
00:0a.0 Communication controller: Lucent Microelectronics: Unknown device 048c (rev 02)
00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8338A (rev 10)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 6306 3D-AGP (rev a2)
-------------------------------------
Modem candidates are at PCI_buses: 00:0a.0
Providing detail for device at PCI_bus 00:0a.0
with vendor-ID:device-ID
----:----
Class 0780: 11c1:048c Communication controller: Lucent Microelectronics: Unknown device 048c (rev 02)
SubSystem 11c1:044c Lucent Microelectronics: Unknown device 044c
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at efffff00 (32-bit, non-prefetchable) [size=256]
I/O ports at dc00 [size=8]
Internal_test: ./scanModem test 11c1:048c 11c1:044c debian 2.4.18lopes 2.95.4
=== Checking 11c1 through chipset providers and modem assemblers ====
Vendor 11c1 corresponds to Lucent Technologies or subsidiary Agere Systems, Inc.
Information is at: http://www.agere.com/client/modem_dsp.html
-----------
Class 0703: 11c1:048c is still NOT supported under Linux, as of 2004 April 25
It is a "software" modem without a digital signal processing (DSP) chipset.
The ltmodem drivers from http://ltmodem.heby.de resources for DSP modems do NOT provide support,
A dialout terminates with "No Carrier" or a Hang if usage of the ltmodem drivers is attempted.
======= PCI_ID checking completed ======
Update=2004 April 25
The following information blocks just query some ppp support items.
====================================================
grep ppp /etc/modules.conf
-------------------------------------
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp ppp_generic
alias char-major-108 ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
### update-modules: end processing /etc/modutils/ppp
-------------------------------------
DEVPPP=crw------- 1 root root 108, 0 Jul 25 2002 /dev/ppp
The current modem symbolic link is: /dev/modem -> /dev/ttyLT0
The ports /dev/ttyS0 or 1,2,3 are for standard Controller chip modems
No devfsd.conf file found, indicated absense of the devfsd daemon package
for device file system (devfs) symbolic link support.
DEVFSD=
---- dmesg queries -------
No local APIC present or hardware disabled
The ModemDriverCompiling.txt is a MUST READ,
if you are not experienced in configuring kernel-source/
or get "unresolved symbols" upon driver insertion.
Most recent WinModem fixes are in: http://linmodems.technion.ac.il/FAQ.html
-------------- ending SCANMODEM section ----------------
SMP=
BASE=source
# ===SETTINGS===
LT_SERIAL_MODULE="lt_serial"
LT_PROPRIETARY_MODULE="lt_modem"
DOCS="1ST-READ CHANGELOG UPDATES-BUGS DOCs utils"
LT_VERSION="8.26a9"
KPKG="kernel"
FV=
checking whether we are using GNU C... yes
using /lib/modules/2.4.18lopes/build
BUILD_LINK=/lib/modules/2.4.18lopes/build -> /usr/src/linux
HEADERS_IN=/linux/
Sorry, assembly of the needed header file: modversions.h
was not specified during configuration of the kernel sources.
Withing the section LOADABLE MODULE SUPPORT:
[*] Set version information on all module symbols
which is necessary to specify the assembly of modeversions.h
Consequently compiling of the drivers will fail at the next step.
MODVERH=
Next checking utilty versions, with ranges
Version_min
Utility or range for kernels
name 2.2.16 2.4.18 Actual_version
Gnu C 2.7.2.3 2.95.3-3.2.1 2.95.4
Gnu make 3.79.1 3.77 3.79.1
binutils 2.8.1.0.23 2.9.1.0.25 2.12.90.0.1
The gcc compiler resources available are:
----------------------------
lrwxrwxrwx 1 root root 8 Nov 15 2003 /usr/bin/gcc -> gcc-2.95
-rwxr-xr-x 1 root root 74088 Sep 23 2002 /usr/bin/gcc-2.95
----------------------------
with your System currently using version 2.95.4
Do NOT mix the major versions of compilers for the kernel and modem drivers
or your System will crash! The following releases are using gcc version 3.2.x :
Mandrake 9, Redhat 8 and SuSE 8.1 in November 2002.
This build_module automatically adjusts its resources to the compiler version used.
If you cannot solve the problem, send BLDrecord.txt to: discuss@linmodems.org
Attachment:
BLDrecord.txt.2
Description: Binary data