Scanner HP3200C
Alguém conseguiu fazer essa bomba funcionar?
Vou comentar o que fiz aqui.
Instalei o sane e comentei o dll.conf deixando apenas o módulo umax_pp
Instalei i xsane para ter um aplicativo gráfico.
Modifiquei a porta paralela na BIOS para EPP.
Quando vou rodar o xsane dá o erro abaixo:
[umax_pp_low] Found 0xA9 expected 0x00 (umax_pp_low.c:7330)
[umax_pp_low] Unexpected value for for register 0x0D, expected 0x00 or
0x40, got 0x18 ! (umax_pp_low.c:7408)
[umax_pp_low] PS2registerRead: found 0x20 expected 0x0 (umax_pp_low.c:7419)
[umax_pp_low] PS2registerRead: found 0x4 expected 0xED (umax_pp_low.c:6574)
[umax_pp_low] PS2registerRead: found 0x4 expected 0x99 (umax_pp_low.c:6574)
[umax_pp_low] PS2registerRead: found 0x78 expected 0x88 (umax_pp_low.c:6572)
[umax_pp_low] PS2registerRead: found 0x6A expected 0xD8 (umax_pp_low.c:6572)
[umax_pp_low] PS2registerRead: found 0xC expected 0x4 (umax_pp_low.c:6598)
[umax_pp_low] ppdev short write (umax_pp_low.c:3030)
[umax_pp_low] registerRead, found 0x4 expected 0xE6 (umax_pp_low.c:6659)
scanimage: no SANE devices found
Abaixo a saída do ppdiag:
marck@hardcore:~$ ppdiag
S01: parport built as module
S02: parport0:
S02: modes:PCSPP,TRISTATE,EPP
S02: ADDR :0x378
S02: IRQ :7
S02: DMA :no DMA used
S03: no parport parameters
S10: ppdev built as module
S12: /dev/parport0 exists ...
S12: /dev/parport0 is readable ...
S12: /dev/parport0 is writable ...
successfull end ....
O micro é um Athlon XP 2200+, 512mb DDR400, motherboard ECS K7S5A,
Debian Sid, Kernel 2.6.11
--
[]´s
Marcello
"Better to reign in Hell than serve in heaven"
Reply to: