Re: configurar placa de modem pctel hsp 56 e motorola sm56
O conflito que me refiro não é de irq's, mas sim da porta usada.
Digo isso pq vi um amigo apanhando pra instalar um usrobotics
no slot isa porque não havia removido o módulo do hsp56 o qual
ocupava o /dev/modem, o impedindo de conseguir usar o outro modem.
Entendeu o que quis dizer?
Igor Abrahão
Em Sáb, 2005-01-22 às 11:59, Carlucio Lopes escreveu:
> On Fri, 21 Jan 2005 17:03:05 -0200
> Igor <igor.abrahao@itelefonica.com.br> wrote:
>
> > Olá amigo, tudo bem?
> Tudo bem...
>
> > Responda-me uma coisa, você está usando o pctel ou o motorola? Porque
> > usar os dois?
> Bem tinha soh o Pctel, mas como consegui fazer motorola funcionar em outro micro k6II com Kernel 2.4.18, coloquei-o para teste.
>
> > É bem provável que um driver esteja conflitando com o outro, portanto
> > deixe o modem pctel e remova o módulo sm56 ou vice-versa.
>
> Que tipo de conflito? um esta na irq=16 e outro irq=18.
>
>
>
> > >
> > > a dias estou tentando configurar placas de modem, consigo ateh iniciar os modulos mas nao funciona, alguem poderia me ajudar?
> > > kernel 2.4.27
> > >
> > >
> > > mensagens:
> > > usando pon ig
> > > #plog
> > > Jan 20 19:47:13 localhost chat[666]: abort on (BUSY)
> > > Jan 20 19:47:13 localhost chat[666]: abort on (NO CARRIER)
> > > Jan 20 19:47:13 localhost chat[666]: abort on (VOICE)
> > > Jan 20 19:47:13 localhost chat[666]: abort on (NO DIALTONE)
> > > Jan 20 19:47:13 localhost chat[666]: abort on (NO DIAL TONE)
> > > Jan 20 19:47:13 localhost chat[666]: abort on (NO ANSWER)
> > > Jan 20 19:47:13 localhost chat[666]: abort on (DELAYED)
> > > Jan 20 19:47:13 localhost chat[666]: send (ATZ^M)
> > > Jan 20 19:47:13 localhost chat[666]: expect (OK)
> > > Jan 20 19:47:58 localhost chat[666]: alarm
> > > Jan 20 19:47:58 localhost chat[666]: send (AT^M)
> > > Jan 20 19:47:58 localhost chat[666]: expect (OK)
> > > Jan 20 19:48:43 localhost chat[666]: alarm
> > > Jan 20 19:48:43 localhost chat[666]: Failed
> > > Jan 20 19:48:43 localhost pppd[665]: Connect script failed
> > >
> > > #lsmod
> > > Module Size Used by Tainted: P
> > > ptserial 41828 1
> > > sm56 1345900 1 (initializing)
> > > pctel 1211808 1 [ptserial]
> > >
> > > links.
> > > lrwxrwxrwx 1 root root 11 2005-01-20 19:35 /dev/modem -> /dev/ttyS15
> > > crw-rw-rw- 1 root uucp 62, 79 2005-01-20 19:47 /dev/ttyS15
> > >
> > > irqs:
> > > CPU0
> > > 0: 46388 IO-APIC-edge timer
> > > 1: 1178 IO-APIC-edge keyboard
> > > 2: 0 XT-PIC cascade
> > > 14: 6967 IO-APIC-edge ide0
> > > 15: 5 IO-APIC-edge ide1
> > > 18: 0 IO-APIC-level PCTel
> > > NMI: 0
> > > LOC: 46430
> > > ERR: 0
> > > MIS: 0
> > >
> > > dma:
> > > 0000-001f : dma1
> > > 0020-003f : pic1
> > > 0040-005f : timer
> > > 0060-006f : keyboard
> > > 0080-008f : dma page reg
> > > 00a0-00bf : pic2
> > > 00c0-00df : dma2
> > > 00f0-00ff : fpu
> > > 0170-0177 : ide1
> > > 01f0-01f7 : ide0
> > > 0376-0376 : ide1
> > > 03c0-03df : vga+
> > > 03f6-03f6 : ide0
> > > 03f8-03ff : serial(set)
> > > c000-cfff : PCI Bus #01
> > > cc00-cc7f : PCI device 1039:6330 (Silicon Integrated Systems [SiS])
> > > d800-d8ff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
> > > e080-e0ff : Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem]
> > > e400-e4ff : Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem]
> > > e400-e407 : PCTel PCT789
> > > e800-e8ff : Silicon Integrated Systems [SiS] Sound Controller
> > > ec00-ec7f : Silicon Integrated Systems [SiS] Sound Controller
> > > ffa0-ffaf : Silicon Integrated Systems [SiS] 5513 [IDE]
> > >
> > > #lspci -vv
> > >
> > > ===>> pctel
> > > Bus 0, device 2, function 6:
> > > Modem: Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] (rev 160).
> > > IRQ 18.
> > > Master Capable. Latency=64. Min Gnt=52.Max Lat=11.
> > > I/O at 0xe400 [0xe4ff].
> > > I/O at 0xe080 [0xe0ff].
> > >
> > > =====>> motorola
> > > Bus 0, device 11, function 0:
> > > Communication controller: PCI device 10d4:1805 (Hualon Microelectronics) (rev 0).
> > > IRQ 16.
> > > Master Capable. No bursts. Min Gnt=1.Max Lat=255.
> > >
> > >
> > > agradeco qualquer ajuda.
> > >
> > > --
> > > Carlucio Lopes - Debian Gnu/Linux+Tinycobol+Tcl+Postgresql
Reply to: