Re: alsa + es1371 + debian
Já tentaste usar oss (ou emulação oss)??
Tenho essa placa de som e funciona muito bem com
emulação oss.
HIHU
[]'s
--- Rodrigo Gressler <rodrigo.gressler@terra.com.br>
escreveu:
> Boa tarde a todos,
>
> Estou com problemas para instalar uma placa de som
> no Debian stable. É
> um placa Ensoniq ES1371 [AudioPCI-97] (rev 08). Não
> sei se alguém já
> passou por isso ou tem alguma dica para me dar.
>
> Estou usando os fontes do alsa-driver, alsa-lib e
> alsa-utils [1] na
> versão 1.0.8 (latest).
>
> Seguindo a documentação deles [2], quando dou um
> # modprobe snd-ens1371
>
> A resposta é:
> /lib/modules/2.4.21/kernel/sound/pci/snd-ens1371.o:
> init_module: No such
> device
> Hint: insmod errors can be caused by incorrect
> module parameters,
> including invalid IO or IRQ parameters
> /lib/modules/2.4.21/kernel/sound/pci/snd-ens1371.o:
> insmod
> /lib/modules/2.4.21/kernel/sound/pci/snd-ens1371.o
> failed
> /lib/modules/2.4.21/kernel/sound/pci/snd-ens1371.o:
> insmod snd-ens1371
> failed
>
> Estou colocando em anexo as saídas do lspci -vv e
> /proc/interrupts.
>
> Já tentei tanto um kernel compilado com o som em
> módulo (CONFIG_SOUND=m)
> e em built-in (CONFIG_SOUND=Y)
>
> Se alguém tiver alguma luz para me dar, agradeço.
>
> Um abraço,
> Rodrigo Gressler
>
> --
> [1] http://alsa-project.org
> [2]
>
<http://alsa-project.org/alsa-doc/doc-php/template.php?company=Ensoniq&card=.&chip=ES1371%2C+ES1372%2C+ES1373%2C+CT5880+%28ES1373%29&module=ens1371>
> > 00:00.0 Host bridge: VIA Technologies, Inc.
> VT82C693A/694x [Apollo PRO133x] (rev c4)
> Subsystem: Asustek Computer, Inc.: Unknown device
> 8017
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR-
> <PERR-
> Latency: 0
> Region 0: Memory at e7800000 (32-bit, prefetchable)
> [size=4M]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:01.0 PCI bridge: VIA Technologies, Inc.
> VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00
> [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR-
> <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01,
> sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: e6000000-e6dfffff
> Prefetchable memory behind bridge:
> e6f00000-e77fffff
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort-
> >Reset- FastB2B-
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596
> ISA [Mobile South] (rev 23)
> Subsystem: Asustek Computer, Inc.: Unknown device
> 8017
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping+ SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR-
> Latency: 0
>
> 00:04.1 IDE interface: VIA Technologies, Inc. Bus
> Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR-
> Latency: 32
> Region 4: I/O ports at b800 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.3 Host bridge: VIA Technologies, Inc. VT82C596
> Power Management (rev 30)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR-
>
> 00:09.0 Multimedia audio controller: Ensoniq ES1371
> [AudioPCI-97] (rev 08)
> Subsystem: Ensoniq Creative Sound Blaster
> AudioPCI64V, AudioPCI128
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (3000ns min, 32000ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at b000 [size=64]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0c.0 Ethernet controller: Intel Corp. 82557
> [Ethernet Pro 100] (rev 09)
> Subsystem: Intel Corp. EtherExpress PRO/100+
> Management Adapter
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+
> VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR-
> Latency: 32 (2000ns min, 14000ns max), cache line
> size 08
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at e5800000 (32-bit,
> non-prefetchable) [size=4K]
> Region 1: I/O ports at a800 [size=64]
> Region 2: Memory at e5000000 (32-bit,
> non-prefetchable) [size=128K]
> Expansion ROM at <unassigned> [disabled] [size=1M]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 01:00.0 VGA compatible controller: Silicon
> Integrated Systems [SiS] 86C326 (rev 0b) (prog-if 00
> [VGA])
> Subsystem: Silicon Integrated Systems [SiS] SiS6326
> GUI Accelerator
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR-
> Latency: 64 (500ns min)
> Region 0: Memory at e7000000 (32-bit, prefetchable)
> [size=8M]
> Region 1: Memory at e6000000 (32-bit,
> non-prefetchable) [size=64K]
> Region 2: I/O ports at d800 [size=128]
> Expansion ROM at e6ff0000 [disabled] [size=64K]
> Capabilities: [40] Power Management version 1
> Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] AGP version 1.0
> Status: RQ=1 SBA- 64bit- FW- Rate=x1,x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
>
> > CPU0
> 0: 29734 XT-PIC timer
> 1: 2 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 8: 3 XT-PIC rtc
> 9: 0 XT-PIC acpi
> 10: 0 XT-PIC es1371
> 11: 5681 XT-PIC eth0
> 14: 7106 XT-PIC ide0
> NMI: 0
> ERR: 0
>
_______________________________________________________
Yahoo! Acesso Grátis - Instale o discador do Yahoo! agora. http://br.acesso.yahoo.com/ - Internet rápida e grátis
Reply to: