Re: X dando pau, o que checar?
Seu X carrega uma pancada de extenções, vai tirando elas aos poucos e
testando pra ver se resolve.
miguel
On Fri, 10 Sep 2004 09:29:52 -0300, Maurício <briqueabraque@yahoo.com> wrote:
>
>
> > > Pessoal,
> > >
> > > Estou usando o sarge. Depois de um recente apt-get update,
> apt-get upgrade o X passou a dar pau logo que é iniciado. Onde posso
> procurar por mensagens de erro?
> > >
> > > Obrigado,
> > > Maurício
> > >
> > >
> >
> > Provavelmente no arquivo /var/log/XFree86.8.log. Boa sorte :)
> >
>
> Não consegui encontrar nada lá que se parecesse com uma mensagem de
> erro. Estou copiando aqui o XFree86.0.log e o XF86Config-4. Será que eu
> deixei passar alguma coisa?
>
> ################################################################
> ################################################################
> ########### Aqui inicia o meu /var/log/XFree86.0.log ###########
> ################################################################
> ################################################################
>
> This is a pre-release version of XFree86, and is not supported in any
> way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
> to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
> please check the latest version in the XFree86 CVS repository
> (http://www.XFree86.Org/cvs).
>
> XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-4 20040529113443
> root@cyberhq.internal.cyberhqz.com)
> Release Date: 15 August 2003
> X Protocol Version 11, Revision 0, Release 6.6
> Build Operating System: Linux 2.6.6-rc3-bk9 i686 [ELF]
> Build Date: 29 May 2004
> Before reporting problems, check http://www.XFree86.Org/
> to make sure that you have the latest version.
> Module Loader present
> OS Kernel: Linux version 2.6.6-1-686 (herbert@gondolin) (gcc version
> 3.3.3 (Debian 20040401)) #1 Wed May 12 14:57:57 EST 2004
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 9 21:25:25 2004
> (==) Using config file: "/etc/X11/XF86Config-4"
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "S3 Inc. 86c988 [ViRGE/VX]"
> (**) |-->Input Device "Generic Keyboard"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc104"
> (**) XKB: model: "pc104"
> (**) Option "XkbLayout" "us_intl"
> (**) XKB: layout: "us_intl"
> (==) Keyboard: CustomKeycode disabled
> (**) |-->Input Device "Configured Mouse"
> (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
> Entry deleted from font path.
> (WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
> Entry deleted from font path.
> (**) FontPath set to
> "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> (II) Open APM successful
> (II) Module ABI versions:
> XFree86 ANSI C Emulation: 0.2
> XFree86 Video Driver: 0.6
> XFree86 XInput driver : 0.4
> XFree86 Server Extension : 0.2
> XFree86 Font Renderer : 0.4
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1106,0605 card 1043,802c rev 81 class 06,00,00
> hdr 00
> (II) PCI: 00:01:0: chip 1106,8605 card 0000,0000 rev 00 class 06,04,00
> hdr 01
> (II) PCI: 00:04:0: chip 1106,0686 card 1043,802c rev 22 class 06,01,00
> hdr 80
> (II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a
> hdr 00
> (II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00
> hdr 00
> (II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00
> hdr 00
> (II) PCI: 00:04:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00
> hdr 00
> (II) PCI: 00:04:5: chip 1106,3058 card 1043,11d4 rev 20 class 04,01,00
> hdr 00
> (II) PCI: 00:0f:0: chip 5333,883d card 0000,0000 rev 02 class 03,00,00
> hdr 00
> (II) PCI: 00:10:0: chip 10ec,8029 card 0000,0000 rev 00 class 02,00,00
> hdr 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) PCI-to-PCI bridge:
> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared)
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
> (II) Host-to-PCI bridge:
> (II) Bus -1: bridge is at (0:4:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus -1 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus -1 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus -1 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (--) PCI:*(0:15:0) S3 Inc. 86c988 [ViRGE/VX] rev 2, Mem @ 0xf0000000/26,
> BIOS @ 0x000c0000/16
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to
> 0xf7ffffff
> (II) Active PCI resource ranges:
> [0] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [1] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
> [2] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [3] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
> [4] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
> [5] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
> [6] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [7] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [9] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
> (II) Active PCI resource ranges after removing overlaps:
> [0] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [1] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
> [2] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [3] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
> [4] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
> [5] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
> [6] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [7] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [9] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [6] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
> [7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [10] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
> [11] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
> [12] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
> [13] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
> (II) LoadModule: "GLcore"
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":
> No symbols found
> Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":
> No symbols found
> Skipping
> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No
> symbols found
> Skipping
> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No
> symbols found
> (II) Module GLcore: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.2
> (II) LoadModule: "bitmap"
> (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Loading font Bitmap
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 2.0.2
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font FreeType
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Loading extension GLX
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) LoadModule: "record"
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.13.0
> Module class: XFree86 Server Extension
> ABI class: XFree86 Server Extension, version 0.2
> (II) Loading extension RECORD
> (II) LoadModule: "speedo"
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No
> symbols found
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.1
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Speedo
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.2
> Module class: XFree86 Font Renderer
> ABI class: XFree86 Font Renderer, version 0.4
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.1.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) LoadModule: "s3virge"
> (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
> (II) Module s3virge: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.8.6
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.6
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.4
> (II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325,
> virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
> 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
> trio 3d/2x, 86C362, 86C368
> (II) Primary Device is: PCI 00:0f:0
> (--) Assigning device section with no busID to primary device
> (--) Chipset virge vx found
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [6] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
> [7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [10] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
> [11] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
> [12] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
> [13] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
> (II) resource ranges after probing:
> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [6] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
> [7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [13] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
> [14] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
> [15] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
> [16] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [19] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
> [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.6
> (**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24
> (==) S3VIRGE(0): RGB weight 888
> (==) S3VIRGE(0): Default visual is TrueColor
> (==) S3VIRGE(0): Using HW Cursor
> (==) S3VIRGE(0): Using fb.
> (==) S3VIRGE(0): mx_cr3a_fix.
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Reloading /usr/X11R6/lib/modules/libvbe.a
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
> (II) S3VIRGE(0): initializing int10
> (II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
> (II) S3VIRGE(0): VESA BIOS detected
> (II) S3VIRGE(0): VESA VBE Version 1.2
> (II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
> (II) S3VIRGE(0): VESA VBE OEM: Diamond Stealth 3D 3000
> (--) S3VIRGE(0): Chipset: "virge vx"
> (==) S3VIRGE(0): XVideo not supported.
> (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
> is 0x0000
> (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
> is 0x0000
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (--) S3VIRGE(0): No DDC signal
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Loading /usr/X11R6/lib/modules/libi2c.a
> (II) Module i2c: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.2.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) S3VIRGE(0): I2C bus "I2C bus" initialized.
> (II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
> (II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
> (II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
> (II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
> (II) S3VIRGE(0): Manufacturer: SAM Model: 9a Serial#: 1195847989
> (II) S3VIRGE(0): Year: 2003 Week: 35
> (II) S3VIRGE(0): EDID Version: 1.3
> (II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
> (II) S3VIRGE(0): Sync: Separate
> (II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
> (II) S3VIRGE(0): Gamma: 2.78
> (II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) S3VIRGE(0): First detailed timing is preferred mode
> (II) S3VIRGE(0): redX: 0.601 redY: 0.335 greenX: 0.304 greenY: 0.593
> (II) S3VIRGE(0): blueX: 0.149 blueY: 0.106 whiteX: 0.295 whiteY: 0.310
> (II) S3VIRGE(0): Supported VESA Video Modes:
> (II) S3VIRGE(0): 720x400@70Hz
> (II) S3VIRGE(0): 640x480@60Hz
> (II) S3VIRGE(0): 640x480@72Hz
> (II) S3VIRGE(0): 640x480@75Hz
> (II) S3VIRGE(0): 800x600@56Hz
> (II) S3VIRGE(0): 800x600@60Hz
> (II) S3VIRGE(0): 800x600@72Hz
> (II) S3VIRGE(0): 800x600@75Hz
> (II) S3VIRGE(0): 1024x768@60Hz
> (II) S3VIRGE(0): 1024x768@70Hz
> (II) S3VIRGE(0): 1024x768@75Hz
> (II) S3VIRGE(0): Manufacturer's mask: 0
> (II) S3VIRGE(0): Supported Future Video Modes:
> (II) S3VIRGE(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
> (II) S3VIRGE(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
> (II) S3VIRGE(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
> (II) S3VIRGE(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
> (II) S3VIRGE(0): Supported additional Video Mode:
> (II) S3VIRGE(0): clock: 65.0 MHz Image Size: 304 x 228 mm
> (II) S3VIRGE(0): h_active: 1024 h_sync: 1048 h_sync_end 1184
> h_blank_end 1344 h_border: 0
> (II) S3VIRGE(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking:
> 806 v_border: 0
> (II) S3VIRGE(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61
> kHz, PixClock max 80 MHz
> (II) S3VIRGE(0): Monitor name: SyncMaster
> (II) S3VIRGE(0): Serial No: HXCW801803
> (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
> (--) S3VIRGE(0): videoram: 4096k
> (--) S3VIRGE(0): Detected current MCLK value of 54.886 MHz
> (WW) S3VIRGE(0): config file vrefresh range 50-75Hz not within DDC
> vrefresh range 56-75Hz
> (II) S3VIRGE(0): Generic Monitor: Using hsync range of 30.00-60.00 kHz
> (II) S3VIRGE(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
> (II) S3VIRGE(0): Clock range: 10.00 to 440.00 MHz
> (II) S3VIRGE(0): Not using default mode "640x350" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "320x175" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "640x400" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "320x200" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "720x400" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "360x200" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "320x240" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "800x600" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "400x300" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "512x384" (vrefresh out of range)
> (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "512x384" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "576x432" (hsync out of range)
> (WW) (1280x960,Generic Monitor) mode clock 108MHz exceeds DDC maximum 80MHz
> (II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "800x512" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory
> for mode)
> (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
> (II) S3VIRGE(0): Not using default mode "1280x960" (width too large for
> virtual size)
> (II) S3VIRGE(0): Not using default mode "1152x768" (width too large for
> virtual size)
> (--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
> (**) S3VIRGE(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
> (II) S3VIRGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768
> 769 772 800 +hsync +vsync
> (**) S3VIRGE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
> (II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601
> 604 625 +hsync +vsync
> (**) S3VIRGE(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
> (II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481
> 484 500 -hsync -vsync
> (**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
> (II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768
> 771 777 806 -hsync -vsync
> (**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
> (II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768
> 771 777 806 -hsync -vsync
> (**) S3VIRGE(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
> (II) S3VIRGE(0): Modeline "832x624" 57.28 832 864 928 1152 624 625
> 628 667 -hsync -vsync
> (**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
> (II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637
> 643 666 +hsync +vsync
> (**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601
> 605 628 +hsync +vsync
> (**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
> (II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601
> 603 625 +hsync +vsync
> (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
> (II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489
> 491 520 -hsync -vsync
> (**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
> (II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490
> 492 525 -hsync -vsync
> (**) S3VIRGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480
> 482 500 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
> (II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385
> 388 403 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
> (II) S3VIRGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384
> 386 400 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
> (II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385
> 388 403 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
> (II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385
> 388 403 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
> (II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312
> 314 333 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300
> 302 312 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318
> 321 333 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300
> 302 314 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
> (II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300
> 301 312 doublescan +hsync +vsync
> (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
> (II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240
> 242 250 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
> (II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244
> 245 260 doublescan -hsync -vsync
> (**) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
> (II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245
> 246 262 doublescan -hsync -vsync
> (++) S3VIRGE(0): DPI set to (100, 100)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.0.0
> ABI class: XFree86 ANSI C Emulation, version 0.2
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 1.1.0
> ABI class: XFree86 Video Driver, version 0.6
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.3.0.1, module version = 0.1.0
> ABI class: XFree86 Video Driver, version 0.6
> (==) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC? No, I don't.
> (II) resource ranges after preInit:
> [0] 0 0 0xf0000000 - 0xf3ffffff (0x4000000) MS[B]
> [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [4] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
> [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
> [7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
> [8] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
> [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [14] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
> [15] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B]
> [16] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B]
> [17] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
> [18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
> [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
> [20] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
> [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (==) S3VIRGE(0): Write-combining range (0xf0000000,0x400000)
> (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
> is 0x0000
> (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
> is 0x0000
> (**) S3VIRGE(0): Using FB
> (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> 8x8 mono pattern filled rectangles
> CPU to Screen color expansion
> Solid Horizontal and Vertical Lines
> Image Writes
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 16 128x128 slots
> 4 256x256 slots
> (==) S3VIRGE(0): Backing store disabled
> (==) S3VIRGE(0): Silken mouse enabled
> (**) Option "dpms"
> (**) S3VIRGE(0): DPMS enabled
> (==) RandR enabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension LBX
> (II) Initializing built-in extension XC-APPGROUP
> (II) Initializing built-in extension SECURITY
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFree86-Bigfont
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Keyboard "Generic Keyboard" handled by legacy driver
> (**) Option "Protocol" "ImPS/2"
> (**) Configured Mouse: Protocol: "ImPS/2"
> (**) Configured Mouse: Core Pointer
> (**) Option "Device" "/dev/input/mice"
> (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
> (==) Configured Mouse: Buttons: 3
> (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
> (II) Configured Mouse: ps2EnableDataReporting: succeeded
> Warning: font renderer for ".pcf" already registered at priority 0
> Warning: font renderer for ".pcf.Z" already registered at priority 0
> Warning: font renderer for ".pcf.gz" already registered at priority 0
> Warning: font renderer for ".snf" already registered at priority 0
> Warning: font renderer for ".snf.Z" already registered at priority 0
> Warning: font renderer for ".snf.gz" already registered at priority 0
> Warning: font renderer for ".bdf" already registered at priority 0
> Warning: font renderer for ".bdf.Z" already registered at priority 0
> Warning: font renderer for ".bdf.gz" already registered at priority 0
> Warning: font renderer for ".pmf" already registered at priority 0
>
> ################################################################
> ################################################################
> #########Aqui termina o meu /var/log/XFree86.0.log##############
> ################################################################
> ################################################################
>
> ################################################################
> ################################################################
> #########Aqui inicia o meu XF86Config-4#########################
> ################################################################
> ################################################################
>
> # XF86Config-4 (XFree86 X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration tool, using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xfree86 package upgrades
> *only*
> # if it has not been modified since the last upgrade of the xserver-xfree86
> # package.
> #
> # If you have edited this file but would like it to be automatically updated
> # again, run the following commands as root:
> #
> # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
> # md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
> # dpkg-reconfigure xserver-xfree86
> Section "Files"
> FontPath "unix/:7100" # local font server
> # if the local font server has problems, we can fall back on these
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/CID"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> EndSection
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "us_intl"
> EndSection
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> EndSection
> Section "Device"
> Identifier "S3 Inc. 86c988 [ViRGE/VX]"
> Driver "s3virge"
> EndSection
> Section "Monitor"
> Identifier "Generic Monitor"
> HorizSync 30-60
> VertRefresh 50-75
> Option "DPMS"
> EndSection
> Section "Screen"
> Identifier "Default Screen"
> Device "S3 Inc. 86c988 [ViRGE/VX]"
> Monitor "Generic Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> EndSection
> Section "DRI"
> Mode 0666
> EndSection
>
> ################################################################
> ################################################################
> #########Aqui termina o meu XF86Config-4########################
> ################################################################
> ################################################################
>
>
>
>
> --
> To UNSUBSCRIBE, email to debian-user-portuguese-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Reply to: