Re: XFree86 4.1.0-9
Eu usei o arquivo de configuracao que vem no driver da pagina da nvidia e so precisei configurar o mouse e o teclado no arquivo com o X 4.1.0. Em anexo.
Em Tue, Jan 01, 2002 at 08:59:43AM +0900, e_merlin escreveu:
> Olá para todos e Feliz Ano Novo!!:o)
>
> Bem, estou com um probleminha chato... tentei instalar o Woody com o XFree86 4.1.0-9,
> mas me ocorre o seguinde. Tento configurar o xserver para a placa GeForce DDR Generic
> (tenho uma AOpen PA256MX Platinum). Quando o XF86Setup testa a configuração, ele da
> erro a ponto de aparecer apenas cacteres ASCII na tela, me forçando assim a dar um
> reboot no Sistema todo. Porém, tentei com o XFree86 3.3.6 mas com o xserver-svga,
> utilizando a configuração para placas como nVidia GeForce 256 Generic. Me dá o mesmo
> problema. No Mandrake 8.1 eu consegui instalar a placa de video em XFree86 4.1.0-9
> como GeForce DDR (Generic) e/ou nVidia GeForce2 DDR Generic.
>
> Agora pergunto, alguém pode me dar alguma dica a ponto de resolver meu problema?
>
>
>
> e-Merlin
> e_merlin@mailandnews.com
>
>
> --
> To UNSUBSCRIBE, email to debian-user-portuguese-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
--
Alexandre Pereira da Silva http://aletes.net
ICQ#: 22163948 Tel: (11) 93830810, 58351996
##########################################################################
# Sample XF86Config file for NVIDIA XFree86 drivers.
#
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
#
# Be sure to replace the monitor values with correct values for your
# monitor!
##########################################################################
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled"
FontPath "/usr/local/lib/X11/fonts/mozilla-fonts:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
EndSection
##########################################################################
# Server flags section.
##########################################################################
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
##########################################################################
# Input devices
##########################################################################
#
# Keyboard section
#
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us-intl"
EndSection
#
# Pointer section
#
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/gpmdata"
Option "Emulate3Buttons"
EndSection
##########################################################################
# Module section
##########################################################################
Section "Module"
Load "dbe"
# Load the glx module.
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
##########################################################################
# Monitor section
##########################################################################
Section "Monitor"
Identifier "MyMonitor"
VendorName "Mitsubisi"
ModelName "Diamond Plus 120u"
UseModes "resolucoes"
# be sure to replace these values with values appropriate for your
# monitor!
# HorizSync 31-82
# VertRefresh 55-120
HorizSync 31.5-35.7
VertRefresh 50-120
EndSection
##########################################################################
# Graphics device section(s)
##########################################################################
Section "Device"
Identifier "NV AGP"
VendorName "nvidia"
Driver "nvidia"
Option "CursorShadow" "true"
Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"
Option "ConnectedMonitor" "CRT, TV"
Option "SecondMonitorHorizSync" "31-82"
Option "SecondMonitorVertRefresh" "55-120"
Option "MetaModes" "800x600,800x600;1024x768,800x600"
Option "TVStandard" "PAL-M"
Option "NoLogo" "true"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "NV PCI"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:0:13:0"
EndSection
Section "Device"
Identifier "NV AGP TwinView"
VendorName "nvidia"
Driver "nvidia"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command.
BusID "PCI:1:0:0"
# sample twinview setup
Option "TwinView"
# be sure to replace the HorizSync and VertRefresh with correct values
# for your monitor!
EndSection
##########################################################################
# Screen sections
##########################################################################
#
# screen section for an nvidia AGP card
#
Section "Screen"
Identifier "Screen AGP"
Device "NV AGP"
Monitor "MyMonitor"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#
# screen section for an nvidia PCI card
#
Section "Screen"
Identifier "Screen PCI"
Device "NV PCI"
Monitor "MyMonitor"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#
# screen section for an nvidia AGP TwinView card
# (look at the appropriate Device section)
#
Section "Screen"
Identifier "Screen AGP TwinView"
Device "NV AGP TwinView"
Monitor "MyMonitor"
DefaultColorDepth 32
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x400"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
##########################################################################
# ServerLayout sections
# (invoke using the '-layout' option of 'startx'.
##########################################################################
#
# just one agp card
#
Section "ServerLayout"
Identifier "AGP"
Screen "Screen AGP"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# just one pci card
#
Section "ServerLayout"
Identifier "PCI"
Screen "Screen PCI"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# 2 cards, non twinview
#
Section "ServerLayout"
Identifier "Both"
Screen "Screen AGP"
Screen "Screen PCI" LeftOf "Screen AGP"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# just one agp twinview card
#
Section "ServerLayout"
Identifier "AGPTwinView"
Screen "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#
# 2 cards, one agp twinview and one pci (3 monitors total)
#
Section "ServerLayout"
Identifier "BothTwinView"
Screen "Screen AGP TwinView"
Screen "Screen PCI" LeftOf "Screen AGP TwinView"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Modes"
Identifier "resolucoes"
EndSection
Reply to: