Erro inicializando servidor gráfico
Olá Pessoal.
Uso a testing e depois do último upgrade neste final de semana
não estou conseguindo inicializar a interface gráfica. Ai esta a saída do
comando X > /tmp/x.out 2>&1
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
pex5.so: Unknown error loading module
xie.so: Unknown error loading module
(**) XKB: rules: "xfree86"
(**) XKB: model: "abnt2"
(**) XKB: layout: "br"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) S3: Graphics device ID: "Generic Video Card"
(**) S3: Monitor ID: "Generic Monitor"
(--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 53.72 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
(--) S3: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
(--) S3: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
(--) S3: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) S3: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11
/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/font
s/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/font
s/100dpi"
(--) S3: PCI: Trio64V2 rev 14, Linear FB @ 0xe0000000
(--) S3: chipset: Trio64V2/DX rev. 14
(--) S3: chipset driver: newmmio
(**) S3: Option "power_saver"
(--) S3: card type: PCI
(--) S3: videoram: 2048k
(--) S3: Ramdac type: s3_trio64v2
(--) S3: Ramdac speed: 170 MHz
(--) S3: Using Trio64V2 programmable clock (MCLK 50.114 MHz)
(--) S3: Maximum allowed dot-clock: 170.000 MHz
(**) S3: Mode "1024x768": mode clock = 44.900
(**) S3: Mode "800x600": mode clock = 49.500
(**) S3: Mode "640x480": mode clock = 36.000
(**) S3: Using 16 bpp. Color weight: 565
(--) S3: Virtual resolution set to 1024x768
(--) S3: Local bus LAW is 0xE0000000
(--) S3: Using a banksize of 2048k, line width of 1024
(--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps
(--) S3: Using 16 planes of 960x255 at (0,769) aligned 8 as font cache
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
Sei que o servidor gráfico não esta encontrando as fontes 'fixed',
mas estou com o pacote xfonts-misc instalado. Alguém pode me ajudar?
Valeu.
Fabiano.
Reply to: