Re: Erro inicializando servidor gráfico
Ei tive este problema há um tempo atrás e solucionei da seguinte forma:
#update-fonts-dir /usr/lib/X11/fonts/misc
[]'s
Em Qui, 2001-11-29 às 15:41, Fabiano Manoel de Andrade escreveu:
>
>
> Olá Pessoal.
>
> Uso a testing e depois do último upgrade neste final de semana
> não estou conseguindo inicializar a interface gráfica. Ai esta a saída do
> comando X > /tmp/x.out 2>&1
>
> XFree86 Version 3.3.6a / X Window System
> (protocol Version 11, revision 0, vendor release 6300)
> Release Date: xx November 2000
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.4.13 i686 [ELF]
> Configured drivers:
> S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
> newmmio, mmio_928, s3_generic
> (using VT number 7)
>
> XF86Config: /etc/X11/XF86Config
> (**) stands for supplied, (--) stands for probed/default values
> (--) no ModulePath specified using default: /usr/X11R6/lib/modules
> pex5.so: Unknown error loading module
> xie.so: Unknown error loading module
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "abnt2"
> (**) XKB: layout: "br"
> (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
> (**) Mouse: 3 button emulation (timeout: 50ms)
> (**) S3: Graphics device ID: "Generic Video Card"
> (**) S3: Monitor ID: "Generic Monitor"
> (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
> (--) S3: Mode "800x600" needs hsync freq of 53.72 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
> (--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
> (--) S3: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
> (--) S3: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
> (--) S3: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
> (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> (--) S3: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
> (--) S3: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
> (--) S3: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
> (--) S3: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
> (--) S3: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
> (--) S3: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
> (--) S3: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
> Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
> Entry deleted from font path.
> (**) FontPath set to
> "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11
> /fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/font
> s/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/font
> s/100dpi"
> (--) S3: PCI: Trio64V2 rev 14, Linear FB @ 0xe0000000
> (--) S3: chipset: Trio64V2/DX rev. 14
> (--) S3: chipset driver: newmmio
> (**) S3: Option "power_saver"
> (--) S3: card type: PCI
> (--) S3: videoram: 2048k
> (--) S3: Ramdac type: s3_trio64v2
> (--) S3: Ramdac speed: 170 MHz
> (--) S3: Using Trio64V2 programmable clock (MCLK 50.114 MHz)
> (--) S3: Maximum allowed dot-clock: 170.000 MHz
> (**) S3: Mode "1024x768": mode clock = 44.900
> (**) S3: Mode "800x600": mode clock = 49.500
> (**) S3: Mode "640x480": mode clock = 36.000
> (**) S3: Using 16 bpp. Color weight: 565
> (--) S3: Virtual resolution set to 1024x768
> (--) S3: Local bus LAW is 0xE0000000
> (--) S3: Using a banksize of 2048k, line width of 1024
> (--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps
> (--) S3: Using 16 planes of 960x255 at (0,769) aligned 8 as font cache
>
> Fatal server error:
> could not open default font 'fixed'
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages
>
> Sei que o servidor gráfico não esta encontrando as fontes 'fixed',
> mas estou com o pacote xfonts-misc instalado. Alguém pode me ajudar?
>
> Valeu.
> Fabiano.
>
>
> --
> To UNSUBSCRIBE, email to debian-user-portuguese-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
--
/========================================================================\
.''`. | Lucianno Albuquerque Ramalho |
: :' : | lucianno@hotlink.com.br - lucianno@dotx.com.br | dot\/
`. `'` | Linux User #197232 - ICQ #45967059 | /\
`- | Live Free or Die !!! - Powered by Debian GNU/Linux |
\========================================================================/
Reply to: