[network] 3Com Corp. FE575C 10/100 LAN CardBus problem z WATCHDOG oraz dlugie czasy pinga
witam!
Posiadam laptopa HP OmniBook 5700CTX (P166MMX, 128MB RAM itd.). Problem jest
z sieciowka na PCMCIA (Dokladnie CardBus) 3Com Corporation 3CCFE575CT
Cyclone CardBus (rev 10). "Testy" prowadze korzystajac z Knoppix 3.2 (jadro
2.4.20-xfs), knoppix 3.4 (jadro 2.4.20 lub tez na 2.6.6), Slackware 10.0
(jadro 2.4.24 (jesli dobrze pamietam) bare.i) - wszystkie jadra sa
standardowe (nie przekompilowywalem ich), pod Debian 3.0 tez sa problemy (na
razie probuje to postawic na knoppiksie lub slacku).
Proba spingowania czegokolwiek konczy sie niepowodzeniem (Host Unreachable)
lub baaardzo dlugimi czasami pinga (rzedu kilkunastu tys. ms) oraz gubieniem
pakietow od 30% - praktycznie 100% oraz od czasu do czasu pojawiają sie
duplikaty (DUP!).
Siec lokalna - 192.168.0.x, komputery sa m.in. pod 101 i 110, na laptopie
ustawiam 112. (karta sieciowa dla 101 jest na RTL-1839, a dla 110 to Intel
EtherExpress Pro - przy czym ten komputer tylko raz byl wpiety do sieci,
celem sprawdzenia czy to moze wina karty sieciowej na RTL-1839).
Karta jest sprawna i slot rowniez - pod Win98SE wszsytko dziala bez zarzutu,
a pingi sa rzedu 1ms (do obu komputerow 101 i 110, wyjscie na swiat rowniez
dziala bez problemu).
Laptopa musze uruchamiac z parametrem ide=nodma (inaczej linux sie nie
uruchomi).
By "postawic" karte probowalem tez z parametrem noapic (tez nie pomoglo).
Przez jakis czas jak ustalilem recznie adres sprzetowy do tablicy ARP
oczywiscie nie dostawalem Destination Host Unreachable, tylko od razu
pingowal. Potem zorientowalem sie, ze czas uzyskania adresu sprzetowego -
trwa bardzo dlugo.
Po jakims czasie, nie dzialaja juz nawet pingi - 100% strat pakietow.
krotkie informacje:
==== iptables -L: ====
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
==================
==== cardctl ident ====
Socket 0:
product info: "3Com Corporation", "3CCFE575CT", "LAN Cardbus Card", "004"
manfid: 0x0101, 0x5257
function: 6 (network)
Socket 1:
no product info available
=========
==== dmesg ====
Linux version 2.4.20-xfs (root@Knoppix) (gcc version 2.95.4 20011002 (Debian
prerelease)) #1 SMP Mit Mär 26 15:37:36 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
128MB LOWMEM available.
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us
apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi
hdh=scsi vga=791 initrd=miniroot.gz nomce quiet BOOT_IMAGE=knoppix
BOOT_IMAGE=vmlinuz nousb ide=nodma noapic 2 fb1024x768 lang=pl
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
ide_setup: ide=nodmaIDE: Prevented DMA
No local APIC present or hardware disabled
Initializing CPU#0
Detected 166.661 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 331.77 BogoMIPS
Memory: 126444k/131072k available (1270k kernel code, 4240k reserved, 503k
data, 128k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After generic, caps: 008001bf 00000000 00000000 00000000
CPU: Common caps: 008001bf 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
CPU: After generic, caps: 008001bf 00000000 00000000 00000000
CPU: Common caps: 008001bf 00000000 00000000 00000000
CPU0: Intel Pentium MMX stepping 03
per-CPU timeslice cutoff: 159.89 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xea9de, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1045/c558] at 00:01.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xc0000000, mapped to 0xc880d000, size 2048k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:9a70
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
OPTI621: IDE controller on PCI bus 00 dev a0
OPTI621: chipset revision 18
OPTI621: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:pio, hdd:pio
hda: TOSHIBA MK3205MAV, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 6354432 sectors (3253 MB), CHS=788/128/63
ide-cd: passing drive hdc to ide-scsi emulation.
Partition check:
hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: CD-ROM XM-7002Bc Rev: 1110
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 464k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
ISO 9660 Extensions: Microsoft Joliet Level 3
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
ISO 9660 Extensions: RRIP_1991A
cloop: Welcome to cloop v0.68
cloop: /cdrom/KNOPPIX/KNOPPIX: 29334 blocks, 65536 bytes/block, largest
block is 65562 bytes.
cloop: loaded (max 1 devices)
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 128k freed
Real Time Clock Driver v1.10e
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Guessed IRQ 10 for device 00:03.0
PCI: Guessed IRQ 10 for device 00:03.1
spurious 8259A interrupt: IRQ7.
Yenta IRQ list 0898, PCI irq10
Socket status: 30000020
Yenta IRQ list 0898, PCI irq10
Socket status: 30000006
cs: cb_alloc(bus 1): vendor 0x10b7, device 0x5257
PCI: Enabling device 01:00.0 (0000 -> 0003)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x2f8-0x2ff 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3f8-0x40f 0x480-0x48f
0x4c0-0x4df
cs: IO port probe 0x0a00-0x0aff: clean.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
01:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at 0x4000. Vers LK1.1.16
PCI: Setting latency timer of device 01:00.0 to 64
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP]
parport0: irq 7 detected
Adding Swap: 124988k swap-space (priority -1)
------> pojawia sie nonstop <------
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0ce0 media a800 dma 0000003a.
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 16(0) current 16(0)
Transmit list 00000000 vs. c02dd200.
0: @c02dd200 length 8000002a status 0001002a
1: @c02dd240 length 8000002a status 0001002a
2: @c02dd280 length 8000002a status 0001002a
3: @c02dd2c0 length 8000002a status 0001002a
4: @c02dd300 length 8000002a status 0001002a
5: @c02dd340 length 8000002a status 0001002a
6: @c02dd380 length 8000002a status 0001002a
7: @c02dd3c0 length 8000002a status 0001002a
8: @c02dd400 length 8000002a status 0001002a
9: @c02dd440 length 8000002a status 0001002a
10: @c02dd480 length 8000002a status 0001002a
11: @c02dd4c0 length 8000002a status 0001002a
12: @c02dd500 length 8000002a status 0001002a
13: @c02dd540 length 8000002a status 0001002a
14: @c02dd580 length 8000002a status 8001002a
15: @c02dd5c0 length 8000002a status 8001002a
eth0: Resetting the Tx ring pointer.
------> /pojawia sie nonstop <------
========
==== cat /proc/interrupts ====
CPU0
0: 56563 XT-PIC timer
1: 700 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
10: 0 XT-PIC Texas Instruments PCI1131, Texas
Instruments PCI1131 (#2), eth0
14: 159 XT-PIC ide0
15: 2756 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 2
MIS: 0
=========
==== lspci -v ====
00:00.0 Host bridge: OPTi Inc. 82C557 [Viper-M] (rev 14)
Flags: bus master, medium devsel, latency 0
00:01.0 ISA bridge: OPTi Inc. 82C558 [Viper-M ISA+IDE] (rev 02)
Flags: bus master, medium devsel, latency 0
00:02.0 VGA compatible controller: Chips and Technologies F65554 (rev c2)
(prog-if 00 [VGA])
Flags: stepping, medium devsel
Memory at c0000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled] [size=256K]
00:03.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:03.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
00:14.0 IDE interface: OPTi Inc. 82C621 [Viper-M/N+] (rev 12) (prog-if 80
[Master])
Flags: bus master, medium devsel, latency 0
I/O ports at 3000 [size=16]
01:00.0 Ethernet controller: 3Com Corporation 3CCFE575CT Cyclone CardBus
(rev 10)
Subsystem: 3Com Corporation FE575C-3Com 10/100 LAN CardBus-Fast Ethernet
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at 4000 [size=256]
Memory at 10800000 (32-bit, non-prefetchable) [size=128]
Memory at 10800080 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 10400000 [size=128K]
Capabilities: [50] Power Management version 2
=========
==== lsmod ====
Module Size Used by Not tainted
iptable_filter 1672 0 (autoclean) (unused)
ip_tables 11032 1 [iptable_filter]
autofs4 8724 1 (autoclean)
af_packet 13448 0 (autoclean)
nls_iso8859-1 2876 0 (autoclean)
nls_cp437 4380 0 (autoclean)
serial 51876 0 (autoclean)
3c59x 25776 1
ds 6472 2
yenta_socket 8640 2
pcmcia_core 37568 0 [ds yenta_socket]
apm 9612 0
rtc 6908 0 (autoclean)
cloop 5232 1
==============
==== ifconfig (identycznie wyglada ifconfig -a) ====
eth0 Link encap:Ethernet HWaddr 00:04:75:D5:A2:FB
inet addr:192.168.0.112 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16 errors:0 dropped:0 overruns:58 frame:0
TX packets:28 errors:1 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:8423 (8.2 KiB) TX bytes:3372 (3.2 KiB)
Interrupt:10 Base address:0x4000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:23 errors:0 dropped:0 overruns:0 frame:0
TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2452 (2.3 KiB) TX bytes:2452 (2.3 KiB)
==============
==== powtarza sie cos takiego "wszedzie" - to z Slackware 10.0 ====
root@home:~# arp -n
Address HWtype HWaddress Flags Mask
Iface
192.168.0.110 (incomplete)
eth0
root@home:~# ping 192.168.0.110
PING 192.168.0.110 (192.168.0.110) 56(84) bytes of data.
>From 192.168.0.112 icmp_seq=1 Destination Host Unreachable
>From 192.168.0.112 icmp_seq=2 Destination Host Unreachable
>From 192.168.0.112 icmp_seq=3 Destination Host Unreachable
>From 192.168.0.112 icmp_seq=4 Destination Host Unreachable
>From 192.168.0.112 icmp_seq=5 Destination Host Unreachable
>From 192.168.0.112 icmp_seq=6 Destination Host Unreachable
--- 192.168.0.110 ping statistics ---
7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6093ms
, pipe 3
root@home:~# arp -n
Address HWtype HWaddress Flags Mask
Iface
192.168.0.110 ether 00:AA:00:C8:3B:68 C
eth0
root@home:~# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.0.101 0.0.0.0 UG 1 0 0 eth0
root@home:~# ping 192.168.0.110
PING 192.168.0.110 (192.168.0.110) 56(84) bytes of data.
64 bytes from 192.168.0.110: icmp_seq=6 ttl=128 time=13520 ms
64 bytes from 192.168.0.110: icmp_seq=7 ttl=128 time=12520 ms
64 bytes from 192.168.0.110: icmp_seq=8 ttl=128 time=11520 ms
64 bytes from 192.168.0.110: icmp_seq=9 ttl=128 time=15320 ms
64 bytes from 192.168.0.110: icmp_seq=10 ttl=128 time=14310 ms
64 bytes from 192.168.0.110: icmp_seq=11 ttl=128 time=13310 ms
64 bytes from 192.168.0.110: icmp_seq=12 ttl=128 time=12310 ms
64 bytes from 192.168.0.110: icmp_seq=13 ttl=128 time=11310 ms
64 bytes from 192.168.0.110: icmp_seq=14 ttl=128 time=10310 ms
64 bytes from 192.168.0.110: icmp_seq=15 ttl=128 time=9310 ms
ping: sendmsg: Interrupted system call
--- 192.168.0.110 ping statistics ---
24 packets transmitted, 10 received, 58% packet loss, time 186231ms
rtt min/avg/max/mdev = 9310.261/12374.237/15320.175/1736.392 ms, pipe 9
root@home:~# ping 192.168.0.110
PING 192.168.0.110 (192.168.0.110) 56(84) bytes of data.
ping: sendmsg: Interrupted system call
--- 192.168.0.110 ping statistics ---
40 packets transmitted, 0 received, 100% packet loss, time 25567ms
=========
ktos mial podobne problemy z 3ccfe575ct?
a moze to wina Texas Instruments PCI1131 (rev 01) ?
jakies pomysly co powinienem zrobic??
o czym zapomnialem??
co sprobowac??
dziekuje z gory za pomoc
pozdrawiam
rosa
Reply to: