Re: modul 3c59x.o nie wspolpracuje z karta
On Thu, 10 Apr 2003, Przepióra Jacek wrote:
> viTAM!
> Prosze o pomoc w rozwiklaniu problemu:
> Karta sieciowa 3c905 nie dziala w DEBIAN-ach (woody,
> potato, KNOPPIX-3.2) a dziala bez problemow
> we FreeBSD-4.8 :-( , z Winzgroza tez wspolpracuje :-((.
> oto krotkie wypiski:
> lsmod wypisuje:
> 3c59x 25776 0
mam podobny klopot
karta 3Com EtherLink ISA 3C509b
pod winda dziala, w tym dhcp takze
pod woodym (2.4.18) niestety nie i nie potrafie wymyslec jak ustalic
dlaczego ;\
IFCONFIG
eth0 Link encap:Ethernet HWaddr 00:60:08:7C:2C:43
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:10 Base address:0x300
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
PINGI
PING localhost (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=0.1 ms
64 bytes from 127.0.0.1: icmp_seq=1 ttl=255 time=0.0 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=255 time=0.0 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=255 time=0.0 ms
--- localhost ping statistics ---
7 packets transmitted, 7 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.1 ms
PING 127.0.0.1 (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=0.1 ms
64 bytes from 127.0.0.1: icmp_seq=1 ttl=255 time=0.0 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=255 time=0.0 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=255 time=0.0 ms
--- 127.0.0.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.1 ms
PING 192.168.0.2 (192.168.0.2): 56 data bytes
64 bytes from 192.168.0.2: icmp_seq=0 ttl=255 time=0.1 ms
64 bytes from 192.168.0.2: icmp_seq=1 ttl=255 time=0.0 ms
64 bytes from 192.168.0.2: icmp_seq=2 ttl=255 time=0.0 ms
64 bytes from 192.168.0.2: icmp_seq=3 ttl=255 time=0.0 ms
--- 192.168.0.2 ping statistics ---
11 packets transmitted, 11 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.1 ms
TABLICA ROUTINGU
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
localnet * 255.255.255.0 U 0 0 0
eth0
default 192.168.0.1 0.0.0.0 UG 0 0 0
eth0
dhclient -> nic
ping 192.168.0.1 -> nic
modul jest zaladowany
moze macie jakis pomysl?
--
Szymon "Morandir" Anders
http://angrenost.org
Reply to: