Witam,
Poniewaz nadal nie moge sobie sam dac rady pisze jeszcze raz.
Mam obsluge usb i drukarki usb w jadrze, laduja sie moduly printer i
usb-uhci,
cat /proc/bus/usb/drivers:
usbdevfs
hub
0- 15: usblp
mount :
/dev/hda7 on / type ext2 (rw,errors=remount-ro)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
none on /proc/bus/usb type usbdevfs (rw)
cat /proc/bus/usb/devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04a9 ProdID=1056 Rev= 1.00
S: Manufacturer=Canon
S: Product=BJC-2100
S: SerialNumber=J811Gx
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
CUPS tez drukarke wykrywa, a drukarka nic, mam tez usbmgr, a w /dev/usb
nieaktywne pliki. Pomozcie.
Dlaczego dmesg mowi 'usb.c: ignoring set_interface for....'
hm, dolaczam wyniki dmesg i lsusb, moze sie nadadza.
Pozdrawiam
Marcin Chmielewski
Attachment:
dmesg.dat
Description: Binary data
Attachment:
lsusb.dat
Description: Binary data