Re: Debian 9 (armel) - startet nicht
Am 20. Februar 2020 13:37:28 MEZ schrieb Stefan Lehner <stefan-lehner@aon.at>:
>Hat jemand noch andere Ansätze/Vorschläge wie man dieses Problem
>umgehen
>kann? Swap deaktivieren ist absolut keine Option, da das Gerät doch
>sehr
>wenig RAM hat.
>Die Kernel patches aus der Bug Meldung möchte ich mir wenn ich Zeit
>habe
>auch noch ansehen ...
>
>
Schau Dir mal zram an.
>
>lg.
>Stefan
>
Robert
>
>
>-----Ursprüngliche Nachricht-----
>Von: Stefan Lehner [mailto:stefan-lehner@aon.at]
>Gesendet: Freitag, 7. Februar 2020 15:11
>An: debian-user-german@lists.debian.org
>Betreff: AW: Debian 9 (armel) - startet nicht
>
>Hallo!
>Danke für eure Antworten! Ich habe es geschafft das Debian 9 mit dem
>älteren
>Kernel 4.8.7 läuft. Warum 4.9 nicht geht habe ich noch nicht
>herausgefunden,
>daran werde ich arbeiten wenn das System mit 4.8.9 vernünftig läuft.
>
>Leider habe ich ein anderes seltsames Problem:
>Apt funktioniert nicht. Immer wenn ich versuche "apt update" oder "apt
>install xyz" auszuführen friert das System ein. Das System reagiert
>zwar auf
>Tastatureingaben und gibt diese am Bildschirm aus aber ich komme
>nichtmehr
>auf die Shell zurück. Es werden auch Kernel messages wie das entfernen
>oder
>einführen einer PCMCI Karte angezeigt aber sonst nichts mehr.
>
>Zuerst dachte ich es liegt am BX emulation patch.
>Aber leider besteht das selbe Problem auch unter Debian 5 (welches
>ARMv4l
>direkt unterstützt) mit Kernel 3.16.81. Leider findet sich kein Eintrag
>zum
>Crash in den log files ...
>
>Vielleicht hat jemand einen Tipp oder kann mir sagen wo ich das
>debugging
>beginnen kann!
>
>
>Danke und Grüße
>Stefan Lehner
>
>
>
>-----Ursprüngliche Nachricht-----
>Von: Stefan Lehner [mailto:stefan-lehner@aon.at]
>Gesendet: Freitag, 24. Jänner 2020 12:21
>An: debian-user-german@lists.debian.org
>Betreff: Debian 9 (armel) - startet nicht
>
>Hi!
>Ich habe hier ein etwas ungewöhnliches Setup. Ein etwas betagter
>Handheld PC
>mit StrongARM Prozessor, auf welchem ich Debian 9 zum laufen bringen
>will.
>
>Kurze Zusammenfassung zum Kernel:
>4.9.210 mit BX Emulation Patch (damit das ganze auch auf dem alten
>Prozessor
>läuft)
>CONFIG_AEABI=y
>CONFIG_OABI_COMPAT=y
>Ganze Kernel config kann ich nachreichen sollte das relevant sein.
>
>Das armel rootfs wurde auf eine CF Karte mit debootstrap kopiert.
>Danach die
>devices erstellt und einige Dinge wie Hostname, locale und so weiter
>konfiguriert.
>
>
>$ debootstrap --arch armel --foreign stretch /mnt/jornada
>http://ftp.de.debian.org/debian
>$ cp /usr/bin/qemu-arm-static /mnt/jornada/usr/bin
>$ LANG=C.UTF-8 chroot /mnt/jornada qemu-arm-static /bin/bash
>
>$ /debootstrap/debootstrap --second-stage
>
>$ apt install makedev
>$ mount none /proc -t proc
>$ cd /dev
>$ MAKEDEV generic
>
>....
>
>Nun zum Problem: Der Kernel bootet und erkennt die Hardware, mountet
>das
>rootfs. Nach einiger Zeit erscheint crng init done und dann ist
>Schluss, das
>System bleibt einfach stehen. Ich habe auch testweise mal versucht
>init=/bin/bash zu übergeben. Kommt aber zum selben Ergebnis ...
>Kann mir hier jemand helfen?
>
>
>Hier das console output:
>
>--------linexec--------
>LinExec: UART Initialized.
>LinExec: UART Initialized.
>LinExec: UART Initialized.
>LinExec: Beginning boot_linux.
>LinExec: Passing the point of no return.. Now.
>LinExec: Entering DRAMloader...
>Booting Linux on physical CPU 0x0
>Linux version 4.9.210 (stefan@spnub1804work) (gcc version 7.4.0
>(Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1) ) #4 Tue Jan 21 15:00:20 UTC
>2020
>CPU: StrongARM-1110 [6901b118] revision 8 (ARMv4), cr=c020717f
>CPU: VIVT data cache, VIVT instruction cache
>Machine: HP Jornada 720
>Memory policy: Data cache writeback
>Built 1 zonelists in Zone order, mobility grouping on. Total pages:
>32512
>Kernel command line: root=/dev/hda2 mem=128m rootdelay=2
>console=ttySA0,115200n8 sa11xx_core.pc_debug=7
>PID hash table entries: 512 (order: -1, 2048 bytes)
>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>Memory: 125928K/131072K available (2980K kernel code, 117K rwdata, 628K
>rodata, 120K init, 84K bss, 5144K reserved, 0K cma-reserved)
>Virtual kernel memory layout:
> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
> vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
> lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
> .text : 0xc0208000 - 0xc04f1250 (2981 kB)
> .init : 0xc0590000 - 0xc05ae000 ( 120 kB)
> .data : 0xc05ae000 - 0xc05cb420 ( 118 kB)
> .bss : 0xc05cb420 - 0xc05e0748 ( 85 kB)
>SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>NR_IRQS:16 nr_irqs:61 61
>irq: Cannot allocate irq_descs @ IRQ1, assuming pre-allocated
>irq: Cannot allocate irq_descs @ IRQ33, assuming pre-allocated
>sched_clock: 32 bits at 3686kHz, resolution 271ns, wraps every
>582542222200ns
>clocksource: oscr0: mask: 0xffffffff max_cycles: 0xffffffff,
>max_idle_ns:
>518462577799 ns
>Console: colour dummy device 30x40
>console [ttySA0] enabled
>Calibrating delay loop... 136.60 BogoMIPS (lpj=683008)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
>CPU: Testing write buffer coherency: ok
>Setting up static identity map for 0xc0208240 - 0xc0208298
>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
>max_idle_ns:
>19112604462750000 ns
>futex hash table entries: 256 (order: -1, 3072 bytes)
>NET: Registered protocol family 16
>DMA: preallocated 256 KiB pool for atomic coherent allocations
>SA1111 Microprocessor Companion Chip: silicon revision 1, metal
>revision 1
>sa1111 sa1111.0: Providing IRQ61-115
>sa1111-rab 0400: dmabounce: registered device
>sa1111-rab 0600: dmabounce: registered device
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>clocksource: Switched to clocksource oscr0
>genirq: Setting trigger mode 3 for irq 112 failed
>(sa1111_type_irq+0x0/0x8c)
>
>genirq: Setting trigger mode 3 for irq 114 failed
>(sa1111_type_irq+0x0/0x8c)
>
>jornada720_pcmcia_configure_socket(): config socket 0 vcc 0 vpp 0
>genirq: Setting trigger mode 3 for irq 113 failed
>(sa1111_type_irq+0x0/0x8c)
>
>genirq: Setting trigger mode 3 for irq 115 failed
>(sa1111_type_irq+0x0/0x8c)
>
>jornada720_pcmcia_configure_socket(): config socket 1 vcc 0 vpp 0
>NET: Registered protocol family 2
>TCP established hash table entries: 1024 (order: 0, 4096 bytes)
>TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
>TCP: Hash tables configured (established 1024 bind 1024)
>UDP hash table entries: 256 (order: 0, 4096 bytes)
>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
>NET: Registered protocol family 1
>NetWinder Floating Point Emulator V0.97 (double precision)
>SSP: device initialized with irq
>workingset: timestamp_bits=30 max_order=15 bucket_order=0
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Epson S1D13XXX FB Driver
>s1d13xxxfb: chip production id 4 = S1D13506
>s1d13xxxfb: chip revision 1
>s1d13xxxfb: regs mapped at 0xf0000000, fb 512 KiB mapped at 0xf1000000
>Console: switching to colour frame buffer device 80x30
>fb0: S1D13xxx frame buffer device
>Serial: SA11x0 driver
>sa11x0-uart.1: ttySA1 at MMIO 0x80010000 (irq = 16, base_baud = 230400)
>is a
>SA1100
>sa11x0-uart.3: ttySA0 at MMIO 0x80050000 (irq = 18, base_baud = 230400)
>is a
>SA1100
>loop: module loaded
>jornada720_pcmcia_configure_socket(): config socket 1 vcc 33 vpp 33
>nbd: registered device at major 43
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>sa1111-ohci 0400: SA-1111 OHCI
>sa1111-ohci 0400: new USB bus registered, assigned bus number 1
>sa1111-ohci 0400: irq 105, io mem 0x40000400
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 1 port detected
>mousedev: PS/2 mouse device common for all mice
>input: HP Jornada 720 keyboard as
>/devices/platform/jornada720_kbd/input/input0
>input: HP Jornada 7xx Touchscreen as
>/devices/platform/jornada_ts/input/input1
>sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>NET: Registered protocol family 17
>Registering BX emulation handler
>sa1100-rtc sa1100-rtc: setting system clock to 1970-01-01 00:00:25 UTC
>(25)
>Waiting 2 sec before mounting root device...
>jornada720_pcmcia_configure_socket(): config socket 1 vcc 33 vpp 33
>jornada720_pcmcia_configure_socket(): config socket 1 vcc 33 vpp 33
>pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
>pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 111)
>jornada720_pcmcia_configure_socket(): config socket 1 vcc 33 vpp 0
>jornada720_pcmcia_configure_socket(): config socket 1 vcc 33 vpp 0
>hda: CF Card, CFA DISK drive
>random: fast init done
>ide0 at 0xc8870000-0xc8870007,0xc887000e on irq 111
>bounce: isa pool size: 16 pages
>hda: max request size: 1024KiB
>hda: 7806960 sectors (3997 MB) w/1KiB Cache, CHS=7745/255/63
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>ide-cs 1.0: ide-cs: hda: Vpp = 0.0
>EXT2-fs (hda2): warning: mounting unchecked fs, running e2fsck is
>recommended
>VFS: Mounted root (ext2 filesystem) on device 3:2.
>Freeing unused kernel memory: 120K
>This architecture does not have kernel memory protection.
>random: crng init done
>
>lg.
>Stefan
--
Diese Nachricht wurde von meinem Android-Gerät mit K-9 Mail gesendet.
Reply to: