Hallo Liste, Ich convertiere seit einigen Tagen ein RAID5 in ein RAID6 und diese Aktion sollte eigentlich mal langsam fertig werden. Nur leider bremst irgendetwas den ganzen Prozess aus und ich weiß leider nicht was: root@claw-storage:~# cat /proc/mdstat Personalities : [raid6] [raid5] [raid4] md0 : active raid6 sdb[6] sdc[0] sdf[5] sdg[4] sde[3] sdd[1] 5860548608 blocks super 1.2 level 6, 512k chunk, algorithm 18 [6/5] [UUUUUU] [==========>..........] reshape = 51.6% (756277248/1465137152) finish=3280.8min speed=3600K/sec unused devices: <none> root@claw-storage:~# free -m total used free shared buffers cached Mem: 1991 894 1097 0 75 719 -/+ buffers/cache: 99 1891 Swap: 3889 0 3889 root@claw-storage:~# top top - 11:06:34 up 2 days, 12:02, 3 users, load average: 1.62, 1.69, 1.70 Tasks: 102 total, 2 running, 100 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 6.4%sy, 0.0%ni, 72.2%id, 19.7%wa, 0.0%hi, 1.7%si, 0.0%st root@claw-storage:~# iostat Linux 2.6.32-5-686 (claw-storage) 28.05.2012 _i686_ (1 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0,37 0,07 9,16 28,86 0,00 61,54 Es ist mir unerklärlich werum hier nicht mehr Leistung investiert wird, die ja verfügbar wäre. Gänge Trick wie z.B: "echo 1024 >> /sys/block/md0/md/stripe_cache_size" "echo -n 500000 > /proc/sys/dev/raid/speed_limit_min" "echo -n 500000 > /proc/sys/dev/raid/speed_limit_max" habe ich bereits versucht. Brachte aber leider keinen Erfolg. Hat jemand Idee ? --- Daniel Koch GPG: 83DE 2C48 5A9F 9992 843A 0EAD 3B2D 7E8F 13F4 9C39
Attachment:
signature.asc
Description: This is a digitally signed message part.