Re: smartd und hddtemp abstellen ...
On Sun, 20 Nov 2011 18:20:05 +0100, SchmiTTT
<cv.schmitt@googlemail.com> wrote:
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>[ 22.805077] scsi 1:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
>[ 22.805087] ata2.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
>dma 96 in
>[ 22.805088] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
>0x4 (timeout)
>[ 22.805188] ata2.00: status: { DRDY }
>[ 22.805241] ata2: hard resetting link
>[ 23.292021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 23.296072] ata2.00: configured for UDMA/33
>[ 23.296446] ata2: EH complete
>[ 43.816028] ata2: limiting SATA link speed to 1.5 Gbps
>
>Dies passiert bei mir ungefaehr 6 bis 7 Mal.
>Dann geht es ins normale Booten ueber.
>Wenn keine DVD oder CD eingelegt ist, dann passiert das noch oefter ...
Du hast ein Hardwareproblem.
>Beim googeln habe ich gefunden, dass man 'smartd' und 'hddtemp'
>abstellen muss.
>Ohne naehere Angabe.
Sollst Du irgendwelchen halbgaren Hinweisen aus dem Netz folgen?
>Wie stelle ich 'smartd' und 'hddtemp' ab, damit das Booten bisschen
>schneller geht ?
Ist Dir das wirklich wichtiger als ein stabil funktionierndes system?
Die oben zitierte Meldung hat übrigens nichts mit smartd oder mit
hddtepm zu tun.
Grüße
Marc
--
-------------------------------------- !! No courtesy copies, please !! -----
Marc Haber | " Questions are the | Mailadresse im Header
Mannheim, Germany | Beginning of Wisdom " | http://www.zugschlus.de/
Nordisch by Nature | Lt. Worf, TNG "Rightful Heir" | Fon: *49 621 72739834
Reply to: