Kein Ton mit TV-Karte
Hallo Leute,
Ich habe Debian Lenny und möchte mit einer TV-Karte Fernsehen. Bild habe
ich aber der Ton kommt nicht.
lspci:
...
Multimedia video controller: Brooktree Corporation Bt848 Video Capture
(rev 12)
VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1)
lsmod |grep bttv
bttv 191700 1
firmware_class 12672 1 bttv
ir_common 47108 1 bttv
compat_ioctl32 12416 1 bttv
videodev 35840 5 tuner,msp3400,bttv,compat_ioctl32
i2c_algo_bit 10244 1 bttv
v4l2_common 16384 4 tuner,tvaudio,msp3400,bttv
videobuf_dma_sg 17412 1 bttv
videobuf_core 23300 2 bttv,videobuf_dma_sg
btcx_risc 9096 1 bttv
tveeprom 18052 1 bttv
i2c_core 27936 10
nvidia,tuner_simple,tuner,tvaudio,msp3400,bttv,i2c_algo_bit,v4l2_common,tveeprom,i2c_nforce2
hwinfo --tv:
03: PCI 108.0: 11200 TV Card
[Created at pci.310]
UDI: /org/freedesktop/Hal/devices/pci_109e_350
Unique ID: 75Hn.ei6eMzKDZY3
Parent ID: H0_h.8LoPsVNGJbF
SysFS ID: /devices/pci0000:00/0000:00:06.0/0000:01:08.0
SysFS BusID: 0000:01:08.0
Hardware Class: tv card
Model: "Brooktree Bt848 Video Capture"
Vendor: pci 0x109e "Brooktree Corporation"
Device: pci 0x0350 "Bt848 Video Capture"
Revision: 0x12
Driver: "bttv"
Driver Modules: "bttv"
Memory Range: 0xec100000-0xec100fff (rw,prefetchable)
IRQ: 16 (no events)
Module Alias: "pci:v0000109Ed00000350sv00000000sd00000000bc04sc00i00"
Driver Info #0:
Driver Status: bttv is active
Driver Activation Cmd: "modprobe bttv"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (PCI bridge)
Hat jemand eine Idee?
Mathias
Reply to: