Re: Laptop + externer Monitor = geht nicht
Am Montag, 31. März 2008 19:28 schrieb Goran:
> N'abend Liste,
>
> nun hab' ich mich den halben Tag mit der xorg.conf rumgeschlagen und nix
> errreicht. Und zwar habe ich heute einen 24"-tft-Monitor bekommen.
> Schönes Ding... lÀuft aber nich'.
>
> Unten habe ich meine xorg.conf in Teilen gepostet. Kann mir jemand einen
> Fehler benennen? Ich find keinen mehr. Oder evtl. kann jemand, der
> ebenfalls den i810-Treiber benötigt mir seine funktionierende xorg.conf
> schicken?
>
> Zu sagen ist das der Xserver abbreicht mit der Meldung das er VBE nicht
> laden kann. Ein Rauswurf der Option VBE in der xorg.conf hilft nicht...
> Fehlermeldung bleibt bestehen.
>
> Die Hardware ist der Dell Laptop D505 mit 855GM-Intel-Chipsatz-Grafik
> und der Dell Monitor 2408WFP.
>
> FÃŒr jeden Rat dankbar!
>
> Goran
Hallo,
ich habe zwar keinen Monitor an den DELL Latitude D520 sondern einen Beamer
angeschlossen, aber der funktioniert. Vielleicht hilft Dir meine xorg.conf.
Gruß
Bernd
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "basic"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
# Option "Emulate3Buttons" "true"
# neue Eintraege
Option "BaudRate" "1200"
Option "SampleRate" "60"
Option "ZAxisMapping" "4 5" # scrollrad
Option "Buttons" "5"
EndSection
#Section "InputDevice"
# Identifier "Synaptics Touchpad"
# Driver "synaptics"
# Option "SendCoreEvents" "true"
# Option "Device" "/dev/psaux"
# Option "Protocol" "auto-dev"
# Option "HorizScrollDelta" "0"
#EndSection
# wenn grafik nicht geht:
# achtung: evtl. muss eine eigene udev-regel geschrieben werden
# siehe datei touchpad-input-devices bei
# http://ubuntuforums.org/showpost.php?p=466023&postcount=50
Section "InputDevice"
Identifier "Alps Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/event2"
Option "Protocol" "event"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "ClickTime" "0"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "10"
Option "HorizScrollDelta" "0"
Option "MinSpeed" "0.45"
Option "MaxSpeed" "0.75"
Option "AccelFactor" "0.020"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "0"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "true"
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS/940GML Express
Integrated Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
# aus der xorg.0.log Datei empfohlen
# Option "DisplayInfo" "FALSE"
# folgende Zeilen Test:
Option "AccelMethod" "EXA"
Option "clone" "true"
Option "MonitorLayout" "CRT,LFP"
EndSection
Section "Monitor"
Identifier "Standardbildschirm"
Option "DPMS"
Identifier "Standardbildschirm"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 945GM/GMS/940GML Express
Integrated Graphics Controller"
Monitor "Standardbildschirm"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Alps Touchpad"
EndSection
Section "DRI"
Mode 0666
Reply to: