Gelegentlich Netzwerklink weg - Xircom PCMCIA xirc2ps_cs
Servus,
bei der Karte handelt es sich um eine PCMCIA-Karte
Standard Debian Etch
Kernel-Ringbuffer meldet:
eth0: media 100BaseT, silicon revision 4
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out
eth0: MII link partner: cde1
eth0: MII selected
eth0: media 100BaseT, silicon revision 4
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out
eth0: MII link partner: cde1
eth0: MII selected
eth0: media 100BaseT, silicon revision 4
eth0: MII link partner: cde1
eth0: MII selected
eth0: media 100BaseT, silicon revision 0
eth0: Compaq: port 0x300, irq 3, hwaddr 00:08:C7:AF:AF:0E
eth0: MII link partner: cde1
eth0: MII selected
eth0: media 100BaseT, silicon revision 4
eth0: no IPv6 routers present
mii-diag meldet:
Using the default interface 'eth0'.
Basic registers of MII PHY #0: 1000 782d 0015 f400 01e1 cde1 ffff ffff.
The autonegotiated capability is 01e0.
The autonegotiated media type is 100baseTx-FD.
Basic mode control register 0x1000: Auto-negotiation enabled.
You have link beat, and everything is working OK.
Your link partner advertised cde1: Flow-control 100baseTx-FD
100baseTx 10baseT-FD 10baseT, w/ 802.3X flow control.
End of basic transceiver information.
eth0 Link encap:Ethernet HWaddr 00:08:C7:AF:AF:0E
inet addr:10.10.0.254 Bcast:10.10.0.255 Mask:255.255.255.0
inet6 addr: fe80::208:c7ff:feaf:af0e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:149009 errors:0 dropped:0 overruns:0 frame:0
TX packets:181359 errors:17 dropped:0 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:48295617 (46.0 MiB) TX bytes:147475948 (140.6 MiB)
Interrupt:3 Base address:0x300
Was könnte das sein? Kabeldefekt kann ich ausschließen, da schon
getauscht.
--
Stefan
Reply to: