Re: Debian etch und UMTSmon

To: debian-user-german@lists.debian.org
Subject: Re: Debian etch und UMTSmon
From: "Stefan Möstel" <s.moestel@googlemail.com>
Date: Wed, 19 Nov 2008 15:25:56 +0100
Message-id: <[🔎] a92a26730811190625t37ba0713pee905b284524a5bf@mail.gmail.com>
Hallo,

ich habe UMTSmon auf deine Anfrage via Telefon an die Supporthotline
von O2 bekommen.

Ja ok ich probier meine Merlin U630 mal nach der Anleitung von
http://www.arbeitsplatzvernichtung-durch-outsourcing.de/marty44/vodaumts.html
einzurichten.

Die darin erstellten Skripte für Pinabfrage und so müssen sein oder?
Bin halt bis jetzt immer mit umtsmon und der automatischen Abfrage
aller Daten und der handlichen Benutzeroberfläche verwöhnt.
Deshalb würde es mich schon freuen wenn es auch wieder so funktionieren würde.

SMS kann ich über die Karte versenden.
Die Karte blinkt auch bei umtsmon auch immer schon schön blau, es kann
also (denke ich) kein großes Problem sein.


Anbei mal einen Konsolenauswurf von "umtsmon -v4"

##P4 t=874: Kernel: 'Linux version 2.6.18-6-686 (Debian
2.6.18.dfsg.1-23) (dannf@debian.org) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #1 SMP Mon Oct 13 16:13:09 UTC 2008'
##P3 t=874: AutoDetectBase::go() for 'Device creation from supplied parameters'
##P3 t=874:  AutoDetectBase::createDevice() for Device 5e21a700
##P3 t=874: Device creation for type 0x5e21a700 requested
##P3 t=874: Device: probing port '/dev/ttyS2' for AT commands
##P1 t=874: Query: removing excess byte '.' 13
##P1 t=874: Query: removing excess byte '.' 10
##P1 t=874: Query: removing excess byte 'N' 78
##P1 t=874: Query: removing excess byte 'O' 79
##P1 t=874: Query: removing excess byte ' ' 32
##P1 t=874: Query: removing excess byte 'C' 67
##P1 t=874: Query: removing excess byte 'A' 65
##P1 t=874: Query: removing excess byte 'R' 82
##P1 t=874: Query: removing excess byte 'R' 82
##P1 t=874: Query: removing excess byte 'I' 73
##P1 t=874: Query: removing excess byte 'E' 69
##P1 t=874: Query: removing excess byte 'R' 82
##P1 t=874: Query: removing excess byte '.' 13
##P1 t=874: Query: removing excess byte '.' 10
##P4 t=874: Query sends the following mesage: 'AT'
AT\r\r\n
OK\r\n
##P4 t=874: answer 1:'AT'
##P4 t=874: answer 2:'OK'
##P3 t=874: Got Query::OK from port
##P3 t=874: SerialPort::~SerialPort()
##P3 t=874: SerialPort::closeDev() for FD 7
##P3 t=874: Device: probing port '/dev/ttyS2' successful
##P4 t=875: PPP: 1, AT: 1
##P2 t=875: GOOD: 'Device created successfully'
##P2 t=875: Using existing hardware config, not written to disk
##P3 t=875: Everything done - device created

##P3 t=875: HelperList::testAndRun(void)
##P3 t=875: HelperList::createHelperList()
##P3 t=875: INSIDE CHILD, uid=1000, pid=4223
##P3 t=875: INSIDE PARENT, uid=1000, pid=4222
##P1 t=878: binary '/sbin/pccardctl' is not SUID -> needs fixing
##P3 t=878: Binary icon_switch is missing and that's minor.
##P3 t=878: HelperList::needsFixing
##P3 t=878: HelperApp::add
##P3 t=878: HelperApp::add
##P3 t=878: HelperApp::add
##P3 t=878: HelperApp::add
##P4 t=879: SIMHandler::askForPIN() has been called
##P4 t=880: Query sends the following mesage: 'AT+CPIN?'
AT+CPIN?\r\r\n
+CPIN: READY\r\n
\r\n
OK\r\n
##P4 t=880: answer 1:'AT+CPIN?'
##P4 t=880: answer 2:'+CPIN: READY'
##P4 t=880: answer 3:'OK'
##P2 t=880: Profile::Profile('')
##P2 t=880:   finally created profile for 'o2'
##P3 t=880: ObserverManager constructor
##P3 t=880: PPPConnection::setNewPPPState state 0 to 3
##P2 t=880: Someone else's PPPD was killed
##P3 t=880: PPPConnection::setNewPPPState state 3 to 0
##P3 t=880: INSIDE CHILD, uid=1000, pid=4235
##P3 t=880: INSIDE PARENT, uid=1000, pid=4222
##P4 t=880: pppd version string '(null)' results in '(null)'.
##P4 t=880: SIMHandler::isPINProtectionEnabled
##P4 t=880: Query sends the following mesage: 'AT+CLCK="SC",2'
AT+CLCK="SC",2\r\r\n
+CLCK: 1\r\n
\r\n
OK\r\n
##P4 t=880: answer 1:'AT+CLCK="SC",2'
##P4 t=880: answer 2:'+CLCK: 1'
##P4 t=880: answer 3:'OK'
##P4 t=880: ConnectionInfo::refreshCGREG(void)
##P4 t=880: Query sends the following mesage: 'AT+CGREG?'
AT+CGREG?\r\r\n
+CGREG: 0,1\r\n
\r\n
OK\r\n
##P4 t=881: answer 1:'AT+CGREG?'
##P4 t=881: answer 2:'+CGREG: 0,1'
##P4 t=881: answer 3:'OK'
##P4 t=881: ConnectionInfo::refreshSignalQuality(void)
##P4 t=881: Query sends the following mesage: 'AT+CSQ'
AT+CSQ\r\r\n
+CSQ: 23,99\r\n
\r\n
OK\r\n
##P4 t=881: answer 1:'AT+CSQ'
##P4 t=881: answer 2:'+CSQ: 23,99'
##P4 t=881: answer 3:'OK'
##P4 t=881: ConnectionInfo::refreshOperator(void)
##P4 t=881: Query sends the following mesage: 'AT+COPS?'
AT+COPS?\r##P4 t=881: answer 1:'AT+COPS?'
\r\n
+COPS: 1,0,"o2 - de",3\r\n
\r\n
OK\r\n
##P4 t=881: answer 1:'+COPS: 1,0,"o2 - de",3'
##P4 t=881: answer 2:'OK'
##P3 t=881: PPPConnection::refreshPPPStats
##P4 t=881: ConnectionInfo::refreshCGREG(void)
##P4 t=881: Query sends the following mesage: 'AT+CGREG?'
AT+CGREG?\r\r\n
+CGREG: 0,1\r\n
\r\n
OK\r\n
##P4 t=881: answer 1:'AT+CGREG?'
##P4 t=881: answer 2:'+CGREG: 0,1'
##P4 t=881: answer 3:'OK'
##P4 t=881: ConnectionInfo::refreshSignalQuality(void)
##P4 t=881: Query sends the following mesage: 'AT+CSQ'
AT+CSQ\r\r\n
+CSQ: 23,99\r\n
\r\n
OK\r\n
##P4 t=881: answer 1:'AT+CSQ'
##P4 t=881: answer 2:'+CSQ: 23,99'
##P4 t=881: answer 3:'OK'
##P4 t=881: ConnectionInfo::refreshOperator(void)
##P4 t=881: Query sends the following mesage: 'AT+COPS?'
AT+COPS?\r##P4 t=881: answer 1:'AT+COPS?'
\r\n
+COPS: 1,0,"o2 - de",3\r\n
\r\n
OK\r\n
##P4 t=881: answer 1:'+COPS: 1,0,"o2 - de",3'
##P4 t=881: answer 2:'OK'
##P3 t=881: PPPConnection::refreshPPPStats
##P4 t=881: ConnectionInfo::refreshCGREG(void)
##P4 t=881: Query sends the following mesage: 'AT+CGREG?'
AT+CGREG?\r\r\n
+CGREG: 0,1\r\n
\r\n
OK\r\n
##P4 t=882: answer 1:'AT+CGREG?'
##P4 t=882: answer 2:'+CGREG: 0,1'
##P4 t=882: answer 3:'OK'
##P4 t=882: ConnectionInfo::refreshSignalQuality(void)
##P4 t=882: Query sends the following mesage: 'AT+CSQ'
AT+CSQ\r\r\n
+CSQ: 23,99\r\n
\r\n
OK\r\n
##P4 t=882: answer 1:'AT+CSQ'
##P4 t=882: answer 2:'+CSQ: 23,99'
##P4 t=882: answer 3:'OK'
##P4 t=882: ConnectionInfo::refreshOperator(void)
##P4 t=882: Query sends the following mesage: 'AT+COPS?'
AT+COPS?\r##P4 t=882: answer 1:'AT+COPS?'
\r\n
+COPS: 1,0,"o2 - de",3\r\n
\r\n
OK\r\n
##P4 t=882: answer 1:'+COPS: 1,0,"o2 - de",3'
##P4 t=882: answer 2:'OK'
##P3 t=882: PPPConnection::refreshPPPStats
##P2 t=882: MainWindowObserver::newPPPState 0
##P3 t=882: mainwindow::newPPPState()
##P3 t=884: umtsmonmain::ConnectPPP
##P4 t=884: ConnectionInfo::refreshCGREG(void)
##P4 t=884: Query sends the following mesage: 'AT+CGREG?'
AT+CGREG?\r\r\n
+CGREG: 0,1\r\n
\r\n
OK\r\n
##P4 t=884: answer 1:'AT+CGREG?'
##P4 t=884: answer 2:'+CGREG: 0,1'
##P4 t=884: answer 3:'OK'
##P4 t=884: ConnectionInfo::refreshSignalQuality(void)
##P4 t=884: Query sends the following mesage: 'AT+CSQ'
AT+CSQ\r\r\n
+CSQ: 23,99\r\n
\r\n
OK\r\n
##P4 t=884: answer 1:'AT+CSQ'
##P4 t=884: answer 2:'+CSQ: 23,99'
##P4 t=884: answer 3:'OK'
##P4 t=884: ConnectionInfo::refreshOperator(void)
##P4 t=884: Query sends the following mesage: 'AT+COPS?'
AT+COPS?\r##P4 t=884: answer 1:'AT+COPS?'
\r\n
+COPS: 1,0,"o2 - de",3\r\n
\r\n
OK\r\n
##P4 t=884: answer 1:'+COPS: 1,0,"o2 - de",3'
##P4 t=884: answer 2:'OK'
##P2 t=884: Profile::Profile('')
##P2 t=884:   finally created profile for 'o2'
##P3 t=884: PPPConnection::startPPP entry
##P3 t=884: PPPConnection::setNewPPPState state 0 to 1
##P2 t=884: MainWindowObserver::newPPPState 1
##P3 t=884: mainwindow::newPPPState()
##P4 t=884: ConnectionInfo:InhibitionCount ++, now is 1
##P4 t=884: ConnectionInfo:InhibitionCount ++, now is 2
##P2 t=884: before the connect magic!!!
##P4 t=884: Query sends the following mesage: 'AT&F'
AT&F\r\r\n
OK\r\n
##P4 t=884: answer 1:'AT&F'
##P4 t=884: answer 2:'OK'
##P4 t=884: Query sends the following mesage: 'ATE1'
ATE1\r\r\n
OK\r\n
##P4 t=884: answer 1:'ATE1'
##P4 t=884: answer 2:'OK'
##P4 t=884: Query sends the following mesage: 'AT+CGDCONT=1,"IP","surfo2"'
AT+CGDCONT=1,"IP","surfo2"\r##P4 t=885: answer 1:'AT+CGDCONT=1,"IP","surfo2"'
\r\n
OK\r\n
##P4 t=885: answer 1:'OK'
##P4 t=885: Query sends the following mesage: 'ATD*99***1#'
ATD*99***1#\r\r\n
CONNECT\r\n
##P4 t=885: answer 1:'ATD*99***1#'
##P4 t=885: answer 2:'CONNECT'
##P4 t=885: Assembled PPP string is: 'idle 7200 asyncmap 0 updetach
dump debug debug debug 460800 lock crtscts modem /dev/ttyS2 noipx
defaultroute replacedefaultroute usepeerdns user nightwind password
hmggdl '
##P4 t=885: ConnectionInfo:InhibitionCount ++, now is 3
##P2 t=885: PPPConnection::PPPThread::PPPThread()
##P4 t=885: ConnectionInfo:InhibitionCount --, now is 2
##P2 t=885: thePPPConnection.startPPP() returned without indicating problems
##P2 t=885: PPPThread::run, before runCommand
##P3 t=885: INSIDE CHILD, uid=1000, pid=4237
##P3 t=885: INSIDE PARENT, uid=1000, pid=4222
##P3 t=885: ConnectionInfo probe inhibited
##P4 t=885: ConnectionInfo::refreshSignalQuality(void)
##P3 t=885: ConnectionInfo probe inhibited
##P3 t=885: ConnectionInfo probe inhibited
##P3 t=885: PPPConnection::refreshPPPStats
##P3 t=885: PPPDThread still running
##P3 t=885: PPPDThread still running
##P2 t=885: PPPThread::run, after runCommand
##P2 t=886: isDone is true
##P3 t=886: PPPConnection::setNewPPPState state 1 to 4
##P2 t=886: MainWindowObserver::newPPPState 4
##P3 t=886: mainwindow::newPPPState()
##P3 t=887: ConnectionInfo probe inhibited
##P4 t=887: ConnectionInfo::refreshSignalQuality(void)
##P3 t=887: ConnectionInfo probe inhibited
##P3 t=887: ConnectionInfo probe inhibited
##P3 t=887: PPPConnection::refreshPPPStats
##P3 t=887: PPPConnection::setNewPPPState state 4 to 0
##P2 t=887: MainWindowObserver::newPPPState 0
##P3 t=887: mainwindow::newPPPState()
##P3 t=887: SerialPort::closeDev() for FD 7
##P4 t=888: ConnectionInfo:InhibitionCount --, now is 1
##P3 t=890: ConnectionInfo probe inhibited
##P4 t=890: ConnectionInfo::refreshSignalQuality(void)
##P3 t=890: ConnectionInfo probe inhibited
##P3 t=890: ConnectionInfo probe inhibited
##P3 t=890: PPPConnection::refreshPPPStats
##P3 t=890: ConnectionInfo probe inhibited
##P4 t=890: ConnectionInfo::refreshSignalQuality(void)
##P3 t=890: ConnectionInfo probe inhibited
##P3 t=890: ConnectionInfo probe inhibited
##P3 t=890: PPPConnection::refreshPPPStats
##P2 t=890: MainWindowObserver::newPPPState 0
##P3 t=890: mainwindow::newPPPState()
##P3 t=890: thread end - wait and cleanup
##P2 t=890: ~PPPThread()
##P4 t=890: ConnectionInfo:InhibitionCount --, now is 0
##P4 t=891: ConnectionInfo::refreshCGREG(void)
##P4 t=891: Query sends the following mesage: 'AT+CGREG?'
AT+CGREG?\r\r\n
+CGREG: 0,1\r\n
\r\n
OK\r\n
##P4 t=891: answer 1:'AT+CGREG?'
##P4 t=891: answer 2:'+CGREG: 0,1'
##P4 t=891: answer 3:'OK'
##P4 t=891: ConnectionInfo::refreshSignalQuality(void)
##P4 t=891: Query sends the following mesage: 'AT+CSQ'
AT+CSQ\r\r\n
+CSQ: 23,99\r\n
\r\n
OK\r\n
##P4 t=891: answer 1:'AT+CSQ'
##P4 t=891: answer 2:'+CSQ: 23,99'
##P4 t=891: answer 3:'OK'
##P4 t=891: ConnectionInfo::refreshOperator(void)
##P4 t=891: Query sends the following mesage: 'AT+COPS?'
AT+COPS?\r##P4 t=891: answer 1:'AT+COPS?'
\r\n
+COPS: 1,0,"o2 - de",3\r\n
\r\n
OK\r\n
##P4 t=891: answer 1:'+COPS: 1,0,"o2 - de",3'
##P4 t=891: answer 2:'OK'
##P3 t=891: PPPConnection::refreshPPPStats
##P4 t=893: PPPConnection::~PPPConnection(void)
##P3 t=893: ObserverManager destructor
Reply to:
Prev by Date: Re: APT Warnungen: couldn't stat source package
Next by Date: Re: [SOLVED] LDAP Authentifizierung für Laptops
Previous by thread: Re: Debian etch und UMTSmon
Next by thread: Samab Probleme
Index(es):
- Date
- Thread