Re: USB-Platte und Kernel 2.6.26-1-686
Hi,
Das sieht mir auch eher nach einem Hardwareproblem aus. Da fällt mir leider
weiter nichts ein. Wie siehts denn an anderen Rechnern aus?
Grüße David Burau
P.S. Antworten bitte immer nur an die Liste. Sonst hat man sie zwei mal. Wer
auf eine Mail in der Liste antwortet ließt sie meist auch ;-)
Am Monday 17 November 2008 10:46:06 schrieb stefan wille:
> Dia Ausgabe des syslog sagt:
>
> Nov 17 10:39:26 debian kernel: [ 9892.763959] usb 3-2: new high speed
> USB device using ehci_hcd and address 3
> Nov 17 10:39:26 debian kernel: [ 9892.901328] usb 3-2: configuration #1
> chosen from 1 choice
> Nov 17 10:39:26 debian kernel: [ 9892.902183] usb 3-2: New USB device
> found, idVendor=04b4, idProduct=6830
> Nov 17 10:39:26 debian kernel: [ 9892.902195] usb 3-2: New USB device
> strings: Mfr=0, Product=57, SerialNumber=44
> Nov 17 10:39:26 debian kernel: [ 9892.902202] usb 3-2: Product: Cypress
> AT2LP
> Nov 17 10:39:26 debian kernel: [ 9892.902210] usb 3-2: SerialNumber:
> DEF10DE2E98B
> Nov 17 10:39:27 debian kernel: [ 9893.325999] Initializing USB Mass
> Storage driver...
> Nov 17 10:39:27 debian kernel: [ 9893.326127] scsi2 : SCSI emulation for
> USB Mass Storage devices
> Nov 17 10:39:27 debian kernel: [ 9893.326127] usbcore: registered new
> interface driver usb-storage
> Nov 17 10:39:27 debian kernel: [ 9893.326127] USB Mass Storage support
> registered.
> Nov 17 10:39:33 debian kernel: [ 9899.306164] eth0: auto-negotiating...
> Nov 17 10:39:35 debian kernel: [ 9901.903481] scsi 2:0:0:0:
> Direct-Access Maxtor 6 L300R0 0000 PQ: 0 ANSI: 0
> Nov 17 10:39:35 debian kernel: [ 9901.947379] scsi 2:0:0:1:
> Direct-Access 0 0 PQ: 0 ANSI: 0
> Nov 17 10:39:35 debian kernel: [ 9901.947379] scsi 2:0:0:2:
> Direct-Access Cypress Semi PQ: 0 ANSI: 0
> Nov 17 10:39:35 debian kernel: [ 9901.950595] scsi 2:0:0:3:
> Direct-Access 0 0 PQ: 0 ANSI: 0
> Nov 17 10:39:35 debian kernel: [ 9901.952385] scsi 2:0:0:4:
> Direct-Access 0 0 PQ: 0 ANSI: 0
> Nov 17 10:39:35 debian kernel: [ 9901.953766] scsi 2:0:0:5:
> Direct-Access 0 0 PQ: 0 ANSI: 0
> Nov 17 10:39:35 debian kernel: [ 9901.956384] scsi 2:0:0:6:
> Direct-Access 0 0 PQ: 0 ANSI: 0
> Nov 17 10:39:35 debian kernel: [ 9902.070376] usb 3-2: reset high speed
> USB device using ehci_hcd and address 3
> Nov 17 10:39:37 debian kernel: [ 9903.151780] usb 3-2: reset high speed
> USB device using ehci_hcd and address 3
> Nov 17 10:39:38 debian kernel: [ 9904.226552] usb 3-2: reset high speed
> USB device using ehci_hcd and address 3
> Nov 17 10:39:39 debian kernel: [ 9905.302994] usb 3-2: reset high speed
> USB device using ehci_hcd and address 3
> Nov 17 10:39:40 debian kernel: [ 9906.265329] sd 2:0:0:0: [sdb]
> 586114704 512-byte hardware sectors (300091 MB)
> Nov 17 10:39:40 debian kernel: [ 9906.265885] sd 2:0:0:0: [sdb] Write
> Protect is off
> Nov 17 10:39:40 debian kernel: [ 9906.273531] sd 2:0:0:0: [sdb]
> 586114704 512-byte hardware sectors (300091 MB)
> Nov 17 10:39:40 debian kernel: [ 9906.274191] sd 2:0:0:0: [sdb] Write
> Protect is off
> Nov 17 10:39:40 debian kernel: [ 9906.274191] sdb:<6>sd 2:0:0:0: [sdb]
> Device not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.278130] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.281260] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.281260] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.285244] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.285244] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.288034] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.288034] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.291523] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.291523] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.294411] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.294425] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.298087] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.298087] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.300909] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.300909] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.303984] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.303984] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.305011] Dev sdb: unable to read
> RDB block 0
> Nov 17 10:39:40 debian kernel: [ 9906.306928] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.306928] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.309758] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.309771] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.314117] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.314117] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.316882] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.316882] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.320006] sd 2:0:0:0: [sdb] Device
> not ready: Sense Key : Not Ready [current]
> Nov 17 10:39:40 debian kernel: [ 9906.320006] sd 2:0:0:0: [sdb] Device
> not ready: Add. Sense: Medium not present
> Nov 17 10:39:40 debian kernel: [ 9906.321000] unable to read partition
> table
> Nov 17 10:39:40 debian kernel: [ 9906.321000] sd 2:0:0:0: [sdb] Attached
> SCSI disk
> Nov 17 10:39:40 debian kernel: [ 9906.321000] sd 2:0:0:1: [sdc]
> 518347918 512-byte hardware sectors (265394 MB)
> Nov 17 10:39:40 debian kernel: [ 9906.321000] sd 2:0:0:1: [sdc] Write
> Protect is off
> Nov 17 10:39:40 debian kernel: [ 9906.324964] sd 2:0:0:1: [sdc]
> 518347918 512-byte hardware sectors (265394 MB)
> Nov 17 10:39:40 debian kernel: [ 9906.324964] sd 2:0:0:1: [sdc] Write
> Protect is off
> Nov 17 10:39:40 debian kernel: [ 9906.324964] sdc:<6>sd 2:0:0:1: [sdc]
> Device not ready: Sense Key : Not Ready [current]
>
>
> Die Module scheinen geladen zu sein.
>
> Beim zweiten mal funktionierte es komischerweise... beim dritten mal
> auch.... vielleicht doch ein Hardware-Defekt?
>
> Ich verstehe es nicht... :)
>
> David Burau schrieb:
> > Was sagt denn (also root) "tail -F /var/log/syslog" beim Anstecken der
> > Platte? (vorher in der Konsole eintippen, dann platte anstecken)
> >
> > Grüße
> >
> > David Burau
> >
> > Am Monday 17 November 2008 10:31:39 schrieb stefan wille:
> >> Hallo,
> >>
> >> ich habe folgendes Problem:
> >>
> >> meine externe Festplatte wird unter Lenny nicht erkannt. Es kommen aber
> >> keine Fehler beim mounten, sondern die Festplatte wird einfach gar nicht
> >> wahrgenommen. Ich kann sie also auch nicht mit gparted neu formatieren.
> >> Einen Hardwaredefekt schließe ich aus, da sie vorher unter Windows und
> >> Ubuntu noch lief. (Unter Ubuntu allerdings mit Mount-Problemen) Es
> >> scheint also ein linuxspezifisches Problem zu sein.
> >>
> >> Der Rechner ist ein Laptop. Fujitsu Siemens Esprimo v5155. Generell kann
> >> man den Laptop als linuxfeindlich bezeichnen. Es wäre natürlich trotzdem
> >> schön, wenn sich das Problem lösen würde.
> >>
> >> Bei fehlenden Angaben, bitte einfach melden.
> >>
> >> Viele Grüße, Stefan Wille.
Reply to: