|
Hallo, ich hoffe hier kann mir jemand helfen! Ich habe auf folgenden System Xensource installiert: Athlon x2 4400+ (2x2,3ghz) 2gb ddr 800ram WD RE 160gb sata Nic 3com 905 Die Netzwerkverbindung zum Hypervisor ist so was von
langsam… Testdownload per http von einem anderen Server hier im
Netzwerk: 17:36:17 (510 KB/s) Über SSH gehen auch nur maximal 800KB/s!! hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 174 MB in 3.02
seconds = 57.62 MB/sec [root@xen tmp]# ifconfig eth0 Link encap:Ethernet
HWaddr 00:01:03:2B:3A:D4 inet6
addr: fe80::201:3ff:fe2b:3ad4/64 Scope:Link UP
BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX
packets:52698 errors:0 dropped:0 overruns:230 frame:0 TX
packets:34480 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000 RX
bytes:46374404 (44.2 MiB) TX bytes:6420574 (6.1 MiB)
Interrupt:19 Base address:0x6000 lo Link
encap:Local Loopback inet
addr:127.0.0.1 Mask:255.0.0.0 inet6
addr: ::1/128 Scope:Host UP
LOOPBACK RUNNING MTU:16436 Metric:1 RX
packets:14832 errors:0 dropped:0 overruns:0 frame:0 TX
packets:14832 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0 RX
bytes:6925984 (6.6 MiB) TX bytes:6925984 (6.6 MiB) xenbr0 Link encap:Ethernet HWaddr
00:01:03:2B:3A:D4 inet
addr:192.168.2.50 Bcast:192.168.2.255 Mask:255.255.255.0 inet6
addr: fe80::201:3ff:fe2b:3ad4/64 Scope:Link UP
BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX
packets:52707 errors:0 dropped:0 overruns:0 frame:0 TX
packets:34492 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0 RX
bytes:45635224 (43.5 MiB) TX bytes:6306784 (6.0 MiB) [root@xen tmp]# lspci 00:00.0 RAM memory: nVidia Corporation MCP61 Memory
Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev
a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory
Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB
Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB
Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev
a1) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA
Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express
bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express
bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express
bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation
GeForce 6100 nForce 405 (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control 01:06.0 Ethernet controller: 3Com Corporation 3c980-C
10/100baseTX NIC [Python-T] (rev 78) Liegt das am Mainboard oder am Chipsatz? Ich hoffe mir kann jemand helfen Mit freundlichen Grüßen Florian Müller |