Re: hda abklemmen führt zu kernel panic
Uwe Kerstan wrote:
* Andre Bischof [24-07-2007 18:08]:
root (hd,0) Error 23: Error while parsing number
Es sieht fast so aus, als wenn update-grub da schon diesen Fehler
produziert. Vielleicht wird dein S-ATA-Controller nicht richtig
unterstützt. Was hast du da eingebaut?
puh, gute Frage. Ist ein Onboard-Controller, läuft wohl mit sata_nv:
28: IDE 100.0: 10600 Disk
[Created at block.222]
UDI:
/org/freedesktop/Hal/devices/storage_serial_SATA_SAMSUNG_HD501LJS0MUJ1KP605592
Unique ID: mE25.x0uGhGXB7n2
Parent ID: M71A.FZwVT2jLZ88
SysFS ID: /block/sda
SysFS BusID: 1:0:0:0
SysFS Device Link:
/devices/pci0000:00/0000:00:07.0/host1/target1:0:0/1:0:0:0
Hardware Class: disk
Model: "SAMSUNG HD501LJ"
Vendor: "SAMSUNG"
Device: "HD501LJ"
Revision: "CR10"
Serial ID: "S0MUJ1KP605592"
Driver: "sata_nv", "sd"
Driver Modules: "sata_nv"
Device File: /dev/sda
Device Files: /dev/sda,
/dev/disk/by-id/ata-SAMSUNG_HD501LJ-S0MUJ1KP605592,
/dev/disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJ1KP605592,
/dev/disk/by-path/pci-0000:00:07.0-scsi-1:0:0:0
Device Number: block 8:0-8:15
Geometry (Logical): CHS 60801/255/63
Size: 976773168 sectors a 512 bytes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #8 (IDE interface)
und:
20: PCI 07.0: 0101 IDE interface
[Created at pci.296]
UDI: /org/freedesktop/Hal/devices/pci_10de_54
Unique ID: M71A.FZwVT2jLZ88
SysFS ID: /devices/pci0000:00/0000:00:07.0
SysFS BusID: 0000:00:07.0
Hardware Class: storage
Model: "Giga-byte GA-K8N Ultra-9 Mainboard"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0054 "CK804 Serial ATA Controller"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xb003 "GA-K8N Ultra-9 Mainboard"
Revision: 0xa3
Driver: "sata_nv"
Driver Modules: "sata_nv"
I/O Ports: 0x9f0-0x9f7 (rw)
I/O Ports: 0xbf0-0xbf3 (rw)
I/O Ports: 0x970-0x977 (rw)
I/O Ports: 0xb70-0xb73 (rw)
I/O Ports: 0xd000-0xd00f (rw)
Memory Range: 0xfa205000-0xfa205fff (rw,non-prefetchable)
IRQ: 217 (1969087 events)
Module Alias: "pci:v000010DEd00000054sv00001458sd0000B003bc01sc01i85"
Driver Info #0:
Driver Status: sata_nv is active
Driver Activation Cmd: "modprobe sata_nv"
Driver Info #1:
Driver Status: generic is active
Driver Activation Cmd: "modprobe generic"
Config Status: cfg=new, avail=yes, need=no, active=unknown
21: PCI 08.0: 0101 IDE interface
[Created at pci.296]
UDI: /org/freedesktop/Hal/devices/pci_10de_55
Unique ID: RE4e.mzsFycq25X8
SysFS ID: /devices/pci0000:00/0000:00:08.0
SysFS BusID: 0000:00:08.0
Hardware Class: storage
Model: "Giga-byte GA-K8N Ultra-9 Mainboard"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0055 "CK804 Serial ATA Controller"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xb003 "GA-K8N Ultra-9 Mainboard"
Revision: 0xa3
Driver: "sata_nv"
Driver Modules: "sata_nv"
I/O Ports: 0x9e0-0x9e7 (rw)
I/O Ports: 0xbe0-0xbe3 (rw)
I/O Ports: 0x960-0x967 (rw)
I/O Ports: 0xb60-0xb63 (rw)
I/O Ports: 0xe400-0xe40f (rw)
Memory Range: 0xfa200000-0xfa200fff (rw,non-prefetchable)
IRQ: 225 (4 events)
Module Alias: "pci:v000010DEd00000055sv00001458sd0000B003bc01sc01i85"
Driver Info #0:
Driver Status: sata_nv is active
Driver Activation Cmd: "modprobe sata_nv"
Driver Info #1:
Driver Status: generic is active
Driver Activation Cmd: "modprobe generic"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Was ich noch probieren will ist ein neuer Kernel, ich habe momentan
2.6.18 auf einem Debian Testing.
Na dann mal los. :-)
War ja dein Tipp ;-)
Rainer empfiehlt ja noch initrd neu zu backen - das wird wohl gemacht,
wenn ich ein neues linux-image und passende header installiere, oder?
Andre
--
Personal weblog and more: http://bischof.homelinux.net
"Das Schwein trägt seinen Namen nicht umsonst" - Stilblüten aus
Kinderaufsätzen: (Tiere)
Alle Fische legen Eier. Die russischen sogar Kaviar.
Reply to: