Re: DriveReady SeekComplete Error
Am Thu, 21 Sep 2006 08:49:35 +0200
schrieb Stefan Bauer:
Hallo,
> Kernel 2.6.8.2 ? debian stable ?
2.6.16-2-k7, deian testing
> was sagt smartctl --all /dev/hda sowie auf /dev/hdb ?
Das ist viel (Frage: ist es besser, so einen Menge an Info als file
anzuhängen? Oder ist das für ne ML nicht gewünscht?)
smartctl --all /dev/hda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce
Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: IBM Deskstar 40GV & 75GXP series (all other firmware)
Device Model: IBM-DTLA-305040
Serial Number: YJEYJ210370
Firmware Version: TW4OA68A
User Capacity: 41.174.138.880 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Thu Sep 21 09:01:50 2006 CEST
==> WARNING: IBM Deskstar 40GV and 75GXP drives may need upgraded SMART
firmware. Please see http://www.geocities.com/dtla_update/ and
http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42215
or http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled. Self-test execution status: ( 0) The previous
self-test routine completed without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2412) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection
on/off support. Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test
supported. No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging
support. Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100
100 060 Pre-fail Always - 0 2 Throughput_Performance
0x0005 100 100 050 Pre-fail Offline - 0 3
Spin_Up_Time 0x0007 114 114 024 Pre-fail
Always - 180 (Average 179) 4 Start_Stop_Count
0x0012 100 100 000 Old_age Always - 1522 5
Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail
Always - 6 7 Seek_Error_Rate 0x000b 100 100
067 Pre-fail Always - 0 8 Seek_Time_Performance
0x0005 100 100 020 Pre-fail Offline - 0 9
Power_On_Hours 0x0012 100 100 000 Old_age
Always - 4575 10 Spin_Retry_Count 0x0013 100
100 060 Pre-fail Always - 0 12
Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 1450 192 Power-Off_Retract_Count 0x0032 099
099 050 Old_age Always - 1522 193
Load_Cycle_Count 0x0012 099 099 050 Old_age
Always - 1522 194 Temperature_Celsius 0x0002 137
137 000 Old_age Always - 40 196
Reallocated_Event_Count 0x0032 100 100 000 Old_age
Always - 6 197 Current_Pending_Sector 0x0022 100 100
000 Old_age Always - 0 198 Offline_Uncorrectable
0x0008 100 100 000 Old_age Offline - 0 199
UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error # 1 Short offline Completed
without error 00% 4574 -
Device does not support Selective Self Tests/Logging
------------------------------------------------------------------
smartctl --all /dev/hdb
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce
Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar WDxxxAB series
Device Model: WDC WD300AB-00BVA0
Serial Number: WD-WMA7H1963170
Firmware Version: 21.01H21
User Capacity: 30.020.272.128 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Sep 21 09:03:46 2006 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an
interrupting command from host. Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1584) seconds.
Offline data collection
capabilities: (0x3b) SMART execute Offline immediate.
Auto Offline data collection
on/off support. Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
No Selective Self-test
supported. SMART capabilities: (0x0003) Saves SMART data
before entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging
support. Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 28) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200
200 051 Pre-fail Always - 0 3 Spin_Up_Time
0x0007 106 100 021 Pre-fail Always - 3050 4
Start_Stop_Count 0x0032 099 099 040 Old_age
Always - 1501 5 Reallocated_Sector_Ct 0x0032 200
200 112 Old_age Always - 0 7 Seek_Error_Rate
0x000b 100 253 051 Pre-fail Always - 0 9
Power_On_Hours 0x0032 096 096 000 Old_age
Always - 3012 10 Spin_Retry_Count 0x0013 100
100 051 Pre-fail Always - 0 11
Calibration_Retry_Count 0x0013 100 100 051 Pre-fail
Always - 0 12 Power_Cycle_Count 0x0032 099 099
000 Old_age Always - 1425 196 Reallocated_Event_Count
0x0032 200 200 000 Old_age Always - 0 197
Current_Pending_Sector 0x0012 200 200 000 Old_age
Always - 0 198 Offline_Uncorrectable 0x0012 200 200
000 Old_age Always - 0 199 UDMA_CRC_Error_Count
0x000a 200 253 000 Old_age Always - 0 200
Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail
Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
Reply to: