Re: pinnacle pctv 40i + kino + kaffeine - finde meine Videokamera nicht
niels jende schrieb:
> Hallo @ all!
>
> Hat einer von Euch schon mal eine Pinnacle pctv 40i erfolgreich
> installiert? Ich möchte _nicht_ TV gucken sondern nur Videos damit
> bearbeiten.
>
>
Okay die Karte wird erkannt und soweit sieht das wohl auch alles recht
nett aus, ABER weder über Kaffeine noch über Kino komme ich an meine
Kamera ran. Die Kamera ist über den S-VHS Anschluss angestöpselt.
Hier mal ein lspci -v:
----------------------------------------------------------------------------------------------------------------------------
debian:/home/niels# lspci -v
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
AGP bridge (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fe000000-fecfffff
Prefetchable memory behind bridge: f2000000-f2ffffff
0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE
(rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at fcd0 [size=16]
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
(rev 01)(prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at fce0 [size=32]
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
0000:00:10.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 24)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at fc00 [size=128]
Memory at fedffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
0000:00:11.0 Multimedia controller: Philips Semiconductors
SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
Subsystem: Pinnacle Systems Inc. PCTV 110i (saa7133)
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at fedff000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
0000:00:13.0 Multimedia audio controller: C-Media Electronics Inc CM8738
(rev 10)
Subsystem: Hercules: Unknown device a650
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at f800 [size=256]
Capabilities: [c0] Power Management version 2
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200
AGP (rev03) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G200 AGP
Flags: bus master, medium devsel, latency 128, IRQ 9
Memory at f2000000 (32-bit, prefetchable) [size=16M]
Memory at fecf8000 (32-bit, non-prefetchable) [size=16K]
Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fe800000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Capabilities: [f0] AGP version 1.0
---------------------------------------------------------------------------------------------------------------------
Das Modul raw1394 ist auch da, siehe:
debian:/home/niels# lsmod | grep 1394
raw1394 32364 0
ieee1394 108632 1 raw1394
---------------------------------------------------------------------------------------------------------------------
> Debian Sarge, 2.6.16er Kernel
>
>
Was fehlt mir bzw wo mache ich Fehler?
> Besten Dank im voraus
> Niels
>
>
Reply to: