[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: usb 2.0 card reader hama - kein Zugriff



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Christian Frommeyer schrieb:
> Am Mittwoch 15 März 2006 10:52 schrieb niels jende:
>> Also, da ist das gute Stück ja und usb Module sind doch auch da,
>> aber
>
> Was sagt denn das Syslog bzw. dmesg? Wird da ein sd* Device
> zugeordnet?
'----------------------------------------------------------------------------------------------------
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 3, frame# 351
  Vendor: Hama      Model: CF  Card Reader   Rev: 9317
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: Hama      Model: SM  Card Reader   Rev: 9317
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: Hama      Model: SD  Card Reader   Rev: 9317
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: Hama      Model: MS  Card Reader   Rev: 9317
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
usb-uhci.c: interrupt, status 2, frame# 369
usb.c: USB disconnect on device 00:07.2-2 address 2
hub.c: new USB device 00:07.2-1, assigned address 3
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
usb.c: USB disconnect on device 00:07.2-1 address 3
hub.c: new USB device 00:07.2-2, assigned address 4
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
eth0: Transmit error, Tx status register 82.
Probably a duplex mismatch.  See Documentation/networking/vortex.txt
  Flags; bus-master 1, dirty 865(1) current 865(1)
  Transmit list 00000000 vs. cd4f2240.
  0: @cd4f2200  length 800001d1 status 8c0101d1
  1: @cd4f2240  length 80000042 status 00010042
  2: @cd4f2280  length 80000042 status 00010042
  3: @cd4f22c0  length 80000042 status 00010042
  4: @cd4f2300  length 800001d0 status 0c0101d0
  5: @cd4f2340  length 8000004b status 0c01004b
  6: @cd4f2380  length 80000042 status 00010042
  7: @cd4f23c0  length 800001d1 status 0c0101d1
  8: @cd4f2400  length 8000004b status 0c01004b
  9: @cd4f2440  length 80000042 status 00010042
  10: @cd4f2480  length 80000220 status 0c010220
  11: @cd4f24c0  length 8000004a status 0001004a
  12: @cd4f2500  length 80000042 status 00010042
  13: @cd4f2540  length 800001cf status 0c0101cf
  14: @cd4f2580  length 8000004a status 0001004a
  15: @cd4f25c0  length 80000042 status 00010042
eth0: Transmit error, Tx status register 82.
Probably a duplex mismatch.  See Documentation/networking/vortex.txt
  Flags; bus-master 1, dirty 1219(3) current 1219(3)
  Transmit list 00000000 vs. cd4f22c0.
  0: @cd4f2200  length 800005e2 status 0c0105e2
  1: @cd4f2240  length 800005e2 status 0c0105e2
  2: @cd4f2280  length 80000502 status 8c010502
  3: @cd4f22c0  length 80000042 status 00010042
  4: @cd4f2300  length 80000457 status 0c010457
  5: @cd4f2340  length 80000214 status 0c010214
  6: @cd4f2380  length 80000042 status 00010042
  7: @cd4f23c0  length 80000048 status 0c010048
  8: @cd4f2400  length 80000036 status 00010036
  9: @cd4f2440  length 80000036 status 00010036
  10: @cd4f2480  length 80000042 status 00010042
  11: @cd4f24c0  length 80000042 status 00010042
  12: @cd4f2500  length 80000042 status 00010042
  13: @cd4f2540  length 8000004a status 0001004a
  14: @cd4f2580  length 80000042 status 00010042
  15: @cd4f25c0  length 80000042 status 00010042
eth0: Transmit error, Tx status register 82.
Probably a duplex mismatch.  See Documentation/networking/vortex.txt
  Flags; bus-master 1, dirty 1224(8) current 1224(8)
  Transmit list 00000000 vs. cd4f2400.
  0: @cd4f2200  length 800005e2 status 0c0105e2
  1: @cd4f2240  length 800005e2 status 0c0105e2
  2: @cd4f2280  length 80000502 status 0c010502
  3: @cd4f22c0  length 8000020f status 0c01020f
  4: @cd4f2300  length 80000042 status 00010042
  5: @cd4f2340  length 80000042 status 00010042
  6: @cd4f2380  length 80000036 status 00010036
  7: @cd4f23c0  length 80000214 status 8c010214
  8: @cd4f2400  length 80000036 status 00010036
  9: @cd4f2440  length 80000036 status 00010036
  10: @cd4f2480  length 80000042 status 00010042
  11: @cd4f24c0  length 80000042 status 00010042
  12: @cd4f2500  length 80000042 status 00010042
  13: @cd4f2540  length 8000004a status 0001004a
  14: @cd4f2580  length 80000042 status 00010042
  15: @cd4f25c0  length 80000042 status 00010042
`--------------------------------------------------------------------------------------------------------
Ich habe jetzt vorsichtshalber, weil so groß, nur mal die Ausgabe von
dmesg!Er scheint da ja irgendwie ein Prob zu haben, von wegen
`mismatch` oder täusche ich mich da
>
> Ist Dein Kernel mit Probe_all_luns gebaut? Sonst könnte es sein,
> das der Kernel nur den ersten Einschub erkennt.
Ich habe ja beide Einschübe ausprobiert und von daher, sollte das
Möbel doch wenigstens an einem USB funzen!oder?
>
> Gruß Chris
>
Gruß
Niels
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFEF+7wZdugMcut97URAiMqAJ9r4MIHjJ/77criuIf1K+3kzkCEpQCePi51
kaepS+2hpuQTLdEJO2FZGp8=
=kkhc
-----END PGP SIGNATURE-----



Reply to: