[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: keine Einwahl mehr bei Arcor-DSL nach Tarifwechsel



Martin Samesch <dug-abuse@theraphosidae.net> writes:

> Hallo Malte,
>
> On Sat, Mar 12, 2005 at 12:02:30PM +0100, Malte Spiess wrote:
>> Hallo,
>> 
>> [...]
>> Hier meine /etc/ppp/peers/dsl-provider:
>> 
>> [...]
>
> Bei mir steht da außerdem noch
>
> # Use the pppoe program to send the ppp packets over the Ethernet
> # link This line should work fine if this computer is the only one
> # accessing the Internet through this DSL connection. This is the
> # right line to use for most people.
> pty "/usr/sbin/pppoe -I eth0 -T 80 -m 1452"
>
> # RFC 2516, paragraph 7 mandates that the following options MUST NOT
> # be requested and MUST be rejected if requested by the peer:
> # Address-and-Control-Field-Compression (ACFC)
> noaccomp
> # Asynchronous-Control-Character-Map (ACCM)
> default-asyncmap
>
> Folgendes habe ich nicht:
>
>> | plugin rp-pppoe.so eth0

Gut, das habe ich auch probiert, allerdings auch ohne Erfolg. Vielleicht
kannst Du mal Deine gesamte dsl-provider-Datei mailen? Du scheinst eine
ältere Version zu haben, vielleicht bringt die mir ja was.

>> Und schließlich noch die Fehlermeldung im Syslog:
>> ,----
>> | Mar 12 11:58:21 localhost pppd[4046]: Plugin rp-pppoe.so loaded.
>> | Mar 12 11:58:21 localhost pppd[4046]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
>> | Mar 12 11:58:21 localhost pppd[4049]: pppd 2.4.2 started by root, uid 0
>> | Mar 12 11:58:22 localhost pppd[4049]: PPP session is 4578
>> | Mar 12 11:58:22 localhost pppd[4049]: Using interface ppp1
>
> ppp1? Was ist ppp0?

Im Moment leider mein Faxmodem. :-(

> Mar 12 14:06:43 tutnix pppd[14087]: Connect: ppp0 <--> /dev/pts/0
>
>> | Mar 12 11:58:22 localhost pppd[4049]: CHAP authentication failed: Authentication failure
>
> CHAP?

> Mar 12 14:06:49 tutnix pppd[14087]: PAP authentication succeeded

Hm, weiß auch nicht so genau, wo da der Unterschied ist. Tut bei mir
jedenfalls anscheinend beides nicht.

>> Ich wäre wirklich um baldige Hilfe sehr dankbar. Arcor muss irgendetwas
>> umgestellt haben, das das Funktionieren der alten Skripte verhindert -
>> nur was?
>
> Von einer Umstellung habe ich nichts bemerkt.

Hast Du denn auch den Tarif gewechselt?

Gruß & Dank
     Malte



Reply to: