cdrecord: kein Löschen und Schreiben von CD-RWs mehr möglich
Hallo Liste,
verwende über direkten Netzwerk aktuell gehaltenen Sarge-Rechner.
Seit neuestem kann ich keine CD-RW's mehr richtig löschen und beschreiben:
aptitude:
cdrecord 4:2.01+01a
Probiert unter Kernel 2.6.8 und 2.4.27.
Probiert habe ich cdrecord mit -blank fast oder -blank all oder blank track,
es half bisher alles nichts....
....es stehen immer noch diese ominösen 2 Tracks noch auf der CD-RW-Disk,
die ich gelöscht haben möchte !
Und übrigens:
ich hatte für diese neu zu erstellenden Sarge-CD-Images auch immer beabsichtigt,
nur 1 ISO-Image draufzuschreiben !
cdrecord -blank fast -v dev=0,6,0 > /tmp/cdrecord_blank_all.out:
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'YAMAHA '
Identifikation : 'CRW8824S '
Revision : '1.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 3172848 = 3098 KB
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 8 2T speed high: 0 (reserved val 10)
power mult factor: 4 6
recommended erase/write power: 3
A1 values: 02 4C B0
A2 values: 4A C8 36
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write in 9 seconds .. .. ..
0 seconds. Operation starts.
Performing OPC...
Blanking PMA, TOC, pregap
Blanking time: 11.436s
Bei cdrecord -blank all -v dev=0,6,0 > /tmp/cdrecord_blank_all.out:
im Prinzip dann:
.....
Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write in 9 seconds ......
0 seconds. Operation starts.
Performing OPC...
Blanking entire disk
Blanking time: 1280.028s
cdrecord -v dev=0,6,0 ./> /tmp/cdrecord.out:
cwalther@W9Y01652:/tmp$ vi cdrecord.out
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'YAMAHA '
Identifikation : 'CRW8824S '
Revision : '1.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 3172848 = 3098 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 589 MB
Track 02: data 641 MB
Total size: 1414 MB (140:08.78) = 630659 sectors
Lout start: 1414 MB (140:10/59) = 630659 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11635 (97:26/65)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 8 2T speed high: 0 (reserved val 10)
power mult factor: 4 6
recommended erase/write power: 3
A1 values: 02 4C B0
A2 values: 4A C8 36
Disk type: Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: -270810
Habt Ihr so etwas auch schon mal gesehen?
Wie kann ich da Abhilfe schaffen, dass es wieder funktioniert?
Vielen Dank,
Grüsse
Christoph
Reply to: