Re: GRUB bootet nicht auf CF mit IDE-Adapter
Salve Henri!
Henri Wahl schrieb am Montag, den 28. Februar 2005 um 08:04h:
> Hallo Welt,
> ich habe als leisen Festplattenersatz einen CF-IDE-Adapter in ein Notebook
> eingebaut mit einer 512 MB CF-Karte. Das Teil wird als Festplatte erkannt
> und sarge lässt sich prima installieren - leider funktioniert das Booten
> von der CF-HD nicht. Konkret wird offenbar GRUB installiert, beim Starten
> erscheint auf dem Bildschirm auch "GRUB" in der oberen linken Ecke - das
> wars dann aber, weiter geht es nicht. Hat jemand eine Idee oder Erfahrung
> damit?
Mit Erfahrung kann ich nicht dienen, eine solche leise/robuste
Installation finde ich jedoch sehr interessant.
Hilft vielleicht:
http://www.chirscoughlin.com/coughlinux2.php
Vermutungen/Fragen....
-braucht man für CF-IDE ein spezielles stage2?
-wie sieht Deine menue.lst aus?
GG-ist die CF-HD rw oder ro?
siehe gnu-bug
http://savannah.gnu.org/bugs/?func=detailitem&item_id=5204
--snipp--
Summary: Installation on a compact flash card appears to work fine, but
on boot I get 'GRUB GRUB'
Original Submission: I have a system with three hard disks, (hda, hdb
and hdd), and a 128MB compact flash disk, (hdc), with C/H/S 978/8/32,
(detected as that by as that by both the BIOS and the kernel.)
Using linux kernel 2.4.22, booting from hdd, I created a type 0x83
partition on the compact flash, using the full size of the disk. I
then formatted it with ext2, copied a minimal linux system to it,
chrooted the partition and ran grub.
I issed the commands:
root (hdc,0)
setup (hdc)
Which executed ok, (grub.conf ant the relevant stages are in
/boot/grub).
However when I boot the compact flash by selecting hdd2 in the bios,
(beinig the third disk), I simply get 'GRUB GRUB' printed on the
screen, and no more.
[...]
Answer:
Modify xour device map. It's written in the manual.
--snapp--
Mit Interesse, was die Lösung ist, Gruß
rob
Reply to: