Re: Problem: wpa_supplicant mit netgear wg 511
On Tuesday 08 February 2005 19:43, Andre Raabe wrote:
> On Tue, Feb 08, 2005 at 05:31:34PM +0100, RAF wrote:
> > irgendwelche ideen woran es liegen könnte?
>
> Meine Vermutung geht jetzt einfach mal dahin, dass Du eventuell auch ein
> Besitzer einer Version 3 Karte bist. Auf der Rueckseite der PCMCIA-Karte
> steht rechts unten (beim CE Logo) eine Versionsangabe. Sollte es sich
> tatsaechlich um eine V3.0 [1] handeln, wirst Du wohl die Karte nicht zum
> laufen bringen koennen.
> Prism54 hat leider noch keine Unterstuetzung dafuer.
>
> [1] http://prism54.org/pipermail/prism54-devel/2004-November/002164.html
>
>
> Gruss,
hallo :)
ist eine taiwan (2.0)
also daran wird es wohl nicht liegen
hier nochmal der output von wpa_supplicant mit -dd:
Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver 'prism54'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=4):
## ## ## ## ####
PSK - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='####'
Initializing interface (2) 'eth0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: ##:##:##:##:##:##
wpa_driver_prism54_set_countermeasures - not yet implemented
Setting scan request: 0 sec 100000 usec
Starting AP scan (broadcast SSID)
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
Received 143 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:09:5b:eb:18:9c ssid='####' wpa_ie_len=24 rsn_ie_len=0
selected
Trying to associate with ##:##:##:##:##:## (SSID='####' freq=2442 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b04 len=12
Wireless event: cmd=0x8b1a len=17
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:09:5B:EB:18:9C
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:09:5B:EB:18:9C
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:09:5B:EB:18:9C
(00)'
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Authentication with 00:00:00:00:00:00 timed out.
No keys have been configured - skip key clearing
gruß
RAF
Reply to: