[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: kann cyrus nicht administrieren



Hallo Björn!


> Kannst Du mal Deine Configs posten?
> 
> cat /etc/imapd.conf
Hier die imapd.conf
--------------------------------------------------------
# Debian Cyrus imapd.conf
# See imapd.conf(5) for more information and more options

# Configuration directory
configdirectory: /var/lib/cyrus

# Which partition to use for default mailboxes
defaultpartition: default
partition-default: /var/spool/cyrus/mail

# News setup
partition-news: /var/spool/cyrus/news
newsspool: /var/spool/news

# Alternate namespace
# If enabled, activate the alternate namespace as documented in
# /usr/share/doc/cyrus21-doc/html/altnamespace.html, where an user's
# subfolders are in the same level as the INBOX
# See also userprefix and sharedprefix on imapd.conf(5)
altnamespace: no

# UNIX Hierarchy Convention
# Set to yes, and cyrus will accept dots in names, and use the forward
# slash "/" to delimit levels of the hierarchy. This is done by converting
# internally all dots to "^", and all "/" to dots. So the "rabbit.holes"
# mailbox of user "helmer.fudd" is stored in "user.elmer^fud.rabbit^holes"
unixhierarchysep: no

# Munging illegal characters in headers
# Headers of RFC2882 messages must not have characters with the 8th bit
# set. However, too many badly-written MUAs generate this, including most
# spamware.  Disable this if you want Cyrus to leave the crappage untouched
# and you don't care that IMAP SEARCH won't work right anymore.
#munge8bit: no

# Forcing recipient user to lowercase
# Cyrus 2.1 is case-sensitive.  If all your mail users are in lowercase, it
is
# probably a very good idea to set lmtp_downcase_rcpt to true.  The default
is
# to assume the user knows what he is doing, and not downcase anything.
#lmtp_downcase_rcpt: yes

# Uncomment the following and add the space-separated users who 
# have admin rights for all services.
admins: cyrus

# Space-separated list of users that have lmtp "admin" status (i.e. that
# can deliver email through TCP/IP lmtp) in addition to those in the
# admins: entry above
#lmtp_admins: postman

# Space-separated list of users that have mupdate "admin" status, in
# addition to those in the admins: entry above. Note that mupdate slaves and

# backends in a Murder cluster need to autenticate against the mupdate
master
# as admin users.
#mupdate_admins: mupdateman

# Space-separated list of users that have imapd "admin" status, in
# addition to those in the admins: entry above
#imap_admins: cyrus

# Space-separated list of users that have sieve "admin" status, in
# addition to those in the admins: entry above
#sieve_admins: cyrus

# List of users and groups that are allowed to proxy for other users,
# seperated by spaces.  Any user listed in this will be allowed to login
# for any other user.  Like "admins:" above, you can have imap_proxyservers
# and sieve_proxyservers.
#proxyservers: cyrus

# No anonymous logins
allowanonymouslogin: no

# Minimum time between POP mail fetches in minutes
popminpoll: 1

# If nonzero, normal users may create their own IMAP accounts by creating
# the mailbox INBOX.  The user's quota is set to the value if it is
positive,
# otherwise the user has unlimited quota.
autocreatequota: 0

# umask used by Cyrus programs
umask: 077

# Sendmail binary location
# DUE TO A BUG, Cyrus sends CRLF EOLs to this program. This breaks Exim 3. 
# For now, to work around the bug, set this to a wrapper that calls 
# /usr/sbin/sendmail -dropcr instead if you use Exim 3.
#sendmail: /usr/sbin/sendmail

# If enabled, cyrdeliver will look for Sieve scripts in user's home
# directories: ~user/.sieve.
sieveusehomedir: false

# If sieveusehomedir is false, this directory is searched for Sieve scripts.
sievedir: /var/spool/sieve

# notifyd(8) method to use for "MAIL" notifications.  If not set, "MAIL"
# notifications are disabled.  Valid methods are: null, log, zephyr
#mailnotifier: zephyr

# notifyd(8) method to use for "SIEVE" notifications.  If not set, "SIEVE"
# notifications are disabled.  This method is only used when no method is
# specified in the script.  Valid methods are null, log, zephyr, mailto
#sievenotifier: zephyr

# DRAC (pop-before-smtp, imap-before-smtp) support
# Set dracinterval to the time in minutes to call DRAC while a user is
# connected to the imap/pop services. Set to 0 to disable DRAC (default)
# Set drachost to the host where the rpc drac service is running
#dracinterval: 0
#drachost: localhost

# If enabled, the partitions will also be hashed, in addition to the hashing
# done on configuration directories. This is recommended if one partition
has a
# very bushy mailbox tree.
hashimapspool: true

# Allow plaintext logins by default (SASL PLAIN)
allowplaintext: yes

# Force PLAIN/LOGIN authentication only
# (you need to uncomment this if you are not using an auxprop-based SASL
# mechanism.  saslauthd users, that means you!). And pay attention to
# sasl_minimum_layer and allowapop below, too.
#sasl_mech_list: PLAIN

# Allow use of the POP3 APOP authentication command.
# Note that this command requires that the plaintext passwords are 
# available in a SASL auxprop backend (eg. sasldb), and that the system
# can provide enough entropy (eg. from /dev/urandom) to create a challenge
# in the banner.
#allowapop: no

# The minimum SSF that the server will allow a client to negotiate. A
# value of 1 requires integrity protection; any higher value requires some
# amount of encryption.
#sasl_minimum_layer: 0

# The maximum SSF that the server will allow a client to negotiate. A
# value of 1 requires integrity protection; any higher value requires some
# amount of encryption.
#sasl_maximum_layer: 256

# List of remote realms whose users may log in using cross-realm
# authentications.  Seperate each realm name by a space. A cross-realm
# identity is considered any identity returned by SASL with an "@" in it.
#loginrealms:

#
# SASL library options (these are handled directly by the SASL libraries,
# refer to SASL documentation for an up-to-date list of these)
#

# The mechanism(s) used by the server to verify plaintext passwords.
Possible
# values are "saslauthd", "auxprop", "pwcheck" and "alwaystrue".  They
# are tried in order, you can specify more than one, separated by spaces.
#
# Do note that, since sasl will be run as user cyrus, you may have a lot of
# trouble to set this up right.
sasl_pwcheck_method: auxprop

# What auxpropd plugins to load, if using sasl_pwcheck_method: auxprop
# by default, all plugins are tried (which is probably NOT what you want).
#sasl_auxprop_plugin: sasldb

# If enabled, the SASL library will automatically create authentication
secrets
# when given a plaintext password. Refer to SASL documentation 
sasl_auto_transition: no

#
# SSL/TLS Options
#

# File containing the global certificate used for ALL services (imap, pop3,
# lmtp, sieve)
#tls_cert_file: /etc/ssl/certs/cyrus-global.pem

# File containing the private key belonging to the global server
certificate.
#tls_key_file: /etc/ssl/private/cyrus-global.key

# File containing the certificate used for imap. If not specified, the
global
# certificate is used.  A value of "disabled" will disable SSL/TLS for imap.
#tls_imap_cert_file: /etc/ssl/certs/cyrus-imap.pem

# File containing the private key belonging to the imap-specific server
# certificate.  If not specified, the global private key is used.  A value
of
# "disabled" will disable SSL/TLS for imap.
#tls_imap_key_file: /etc/ssl/private/cyrus-imap.key

# File containing the certificate used for pop3. If not specified, the
global
# certificate is used.  A value of "disabled" will disable SSL/TLS for pop3.
#tls_pop3_cert_file: /etc/ssl/certs/cyrus-pop3.pem

# File containing the private key belonging to the pop3-specific server
# certificate.  If not specified, the global private key is used.  A value
of
# "disabled" will disable SSL/TLS for pop3.
#tls_pop3_key_file: /etc/ssl/private/cyrus-pop3.key

# File containing the certificate used for lmtp. If not specified, the
global
# certificate is used.  A value of "disabled" will disable SSL/TLS for lmtp.
#tls_lmtp_cert_file: /etc/ssl/certs/cyrus-lmtp.pem

# File containing the private key belonging to the lmtp-specific server
# certificate.  If not specified, the global private key is used.  A value
of
# "disabled" will disable SSL/TLS for lmtp.
#tls_lmtp_key_file: /etc/ssl/private/cyrus-lmtp.key

# File containing the certificate used for sieve. If not specified, the
global
# certificate is used.  A value of "disabled" will disable SSL/TLS for
sieve.
#tls_sieve_cert_file: /etc/ssl/certs/cyrus-sieve.pem

# File containing the private key belonging to the sieve-specific server
# certificate.  If not specified, the global private key is used.  A value
of
# "disabled" will disable SSL/TLS for sieve.
#tls_sieve_key_file: /etc/ssl/private/cyrus-sieve.key

# File containing one or more Certificate Authority (CA) certificates.
#tls_ca_file: /etc/ssl/certs/cyrus-imapd-ca.pem

# Path to directory with certificates of CAs.
tls_ca_path: /etc/ssl/certs

# The length of time (in minutes) that a TLS session will be cached for
later
# reuse.  The maximum value is 1440 (24 hours), the default.  A value of 0
will
# disable session caching.
tls_session_timeout: 1440

# The list of SSL/TLS ciphers to allow.  The format of the string is
described
# in ciphers(1). THIS DISABLES THE WEAK 'FOR EXPORT' CRAP!
tls_cipher_list: TLSv1:SSLv3:SSLv2:!NULL:!EXPORT:!DES:!LOW:@STRENGTH

# Require a client certificate for ALL services (imap, pop3, lmtp, sieve).
#tls_require_cert: false

# Require a client certificate for imap ONLY.
#tls_imap_require_cert: false

# Require a client certificate for pop3 ONLY.
#tls_pop3_require_cert: false

# Require a client certificate for lmtp ONLY.
#tls_lmtp_require_cert: false

# Require a client certificate for sieve ONLY.
#tls_sieve_require_cert: false

#
# Cyrus Murder cluster configuration
#
# Set the following options to the values needed for this server to
# autenticate against the mupdate master server:
# mupdate_server
# mupdate_port
# mupdate_username
# mupdate_authname
# mupdate_realm
# mupdate_password
# mupdate_retry_delay

##
## KEEP THESE IN SYNC WITH cyrus.conf
##
# Unix domain socket that lmtpd listens on.
lmtpsocket: /var/run/cyrus/socket/lmtp

# Unix domain socket that idled listens on.
idlesocket: /var/run/cyrus/socket/idle

# Unix domain socket that the new mail notification daemon listens on.
notifysocket: /var/run/cyrus/socket/notify

##
## DEBUGGING
##
# Debugging hook. See /usr/share/doc/cyrus21-common/README.Debian.debug
# Keep the hook disabled when it is not in use
#
# gdb Back-traces
#debug_command: /usr/bin/gdb -batch -cd=/tmp -x
/usr/lib/cyrus/get-backtrace.gdb /usr/lib/cyrus/bin/%s %d
>/tmp/gdb-backtrace.cyrus.%1$s.%2$d <&- 2>&1 &
#
# system-call traces
#debug_command: /usr/bin/strace -tt -o /tmp/strace.cyrus.%s.%d -p %2$d <&-
2>&1 &
#
# library traces
#debug_command: /usr/bin/ltrace -tt -n 2 -o /tmp/ltrace.cyrus.%s.%d -p %2$d
<&- 2>&1 &
---------------------------------------------------------------

> cat /etc/cyrus.conf
hier die cyrus.conf
---------------------------------------------------------------
# Debian defaults for Cyrus IMAP server/cluster implementation
# see cyrus.conf(5) for more information
#
# All the tcp services are tcpd-wrapped. see hosts_access(5)
# $Id: cyrus.conf,v 1.16 2003/11/05 01:04:22 hmh Exp $

START {
	# do not delete this entry!
	recover		cmd="/usr/sbin/ctl_cyrusdb -r"
  
	# this is only necessary if using idled for IMAP IDLE
	# this is NOT to be enabled right now in Debian builds
	#idled		cmd="idled"

	# this is useful on backend nodes of a Murder cluster
	# it causes the backend to syncronize its mailbox list with
	# the mupdate master upon startup
	#mupdatepush   cmd="/usr/sbin/ctl_mboxlist -m"

	# this is recommended if using duplicate delivery suppression
	delprune	cmd="/usr/sbin/ctl_deliver -E 3"
	# this is recommended if caching TLS sessions
	tlsprune	cmd="/usr/sbin/tls_prune"
}

# UNIX sockets start with a slash and are absolute paths
# you can use a maxchild=# to limit the maximum number of forks of a service
# you can use babysit=true and maxforkrate=# to keep tight tabs on the
service
# most services also accept -U (limit number of reuses) and -T (timeout)
SERVICES {
	# --- Normal cyrus spool, or Murder backends ---
	# add or remove based on preferences
	imap		cmd="imapd -U 30" listen="imap" prefork=0 maxchild=100
	#imaps		cmd="imapd -s -U 30" listen="imaps" prefork=0 maxchild=100
	pop3		cmd="pop3d -U 30" listen="pop3" prefork=0 maxchild=50
	#pop3s		cmd="pop3d -s -U 30" listen="pop3s" prefork=0 maxchild=50

	# At least one form of LMTP is required for delivery
	# (you must keep the Unix socket name in sync with imap.conf)
	#lmtp		cmd="lmtpd" listen="localhost:lmtp" prefork=0 maxchild=20
	lmtpunix	cmd="lmtpd" listen="/var/run/cyrus/socket/lmtp" prefork=0
maxchild=20
	# ----------------------------------------------

	# useful if you need to give users remote access to sieve
	# by default, we limit this to localhost in Debian
  	sieve		cmd="timsieved" listen="localhost:sieve" prefork=0 maxchild=100

	# this one is needed for the notification services
	notify		cmd="notifyd" listen="/var/run/cyrus/socket/notify" proto="udp"
prefork=1

	# --- Murder frontends -------------------------
	# enable these and disable the matching services above, 
	# except for sieve (which deals automatically with Murder)

	# mupdate database service - must prefork at least 1
	# (mupdate slaves)
	#mupdate       cmd="mupdate" listen=3905 prefork=1
	# (mupdate master, only one in the entire cluster)
	#mupdate       cmd="mupdate -m" listen=3905 prefork=1

	# proxies that will connect to the backends
	#imap		cmd="proxyd" listen="imap" prefork=0 maxchild=100
	#imaps		cmd="proxyd -s" listen="imaps" prefork=0 maxchild=100
	#pop3		cmd="pop3proxyd" listen="pop3" prefork=0 maxchild=50
	#pop3s		cmd="pop3proxyd -s" listen="pop3s" prefork=0 maxchild=50
	#lmtp		cmd="lmtpproxyd" listen="lmtp" prefork=1 maxchild=20
	# ----------------------------------------------
}

EVENTS {
	# this is required
	checkpoint	cmd="/usr/sbin/ctl_cyrusdb -c" period=30

	# this is only necessary if using duplicate delivery suppression
	delprune	cmd="/usr/sbin/ctl_deliver -E 3" at=0401

	# this is only necessary if caching TLS sessions
	tlsprune	cmd="/usr/sbin/tls_prune" at=0401
}

--------------------------------------------------------------------
 
> evtl.:
> cat /etc/saslauthd.conf
Die Datei  hab ich nicht.


Gruß

Thomas

-- 
+++ GMX - die erste Adresse für Mail, Message, More +++
1 GB Mailbox bereits in GMX FreeMail http://www.gmx.net/de/go/mail



Reply to: