Wo ist mein USB Stick?
Hallo, NG.
Vielleicht könnt ihr mir ja bei der Suche helfen... Wo zum Henker ist
mein USB - Stick? Bisher lag er immer unter /dev/sda1. Doch wenn ich
ihn nun per "mount /dev/sda1 /mnt/usbdevice" einbinden will, heisst
es immer, dass dort kein gültiges blockorientiertes Device vorhanden
sei.
Auch ein "mount -t vfat /dev/sda1 /mnt/usbdevice" bringt nichts...
Hier die Ausgabe von dmesg nach dem anstöpseln des Sticks:
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:10.0-2, assigned address 2
usb.c: kmalloc IF c4e6d500, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Creative Tech
Product: NOMAD MuVo
SerialNumber: 000000000000
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x41e/0x4106) is not claimed by any
active driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 041e:4106
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 0.01
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0020
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = c0
MaxPower = 100mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 04 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 91
usb-storage: Array length appears to be: 93
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xcb6ea154 Out: 0xcb6ea140 Int: 0x00000000
(Period 0)
usb-storage: New GUID 041e41060000000000000000
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 81 ed e1 24 1c c0
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128
CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 56/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1 R 199 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 4
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: CREATIVE Model: NOMAD_MUVO Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface c4e6d500
USB Mass Storage support registered.
Reply to: