zum ersten mal WLAN
hallo liste,
ich hoff eihr koennt mir helfen, ich hab grad zum ersten mal mit wlan zu
tun :-)
also ich versuche hier ne d-link dwl-650 zum laufen zu bringen und bin
mir nicht ganz sicher ob das so hin haut also :
hab n testing/unstable hier laufen mit nem 2.6.3 kernel
derfriese@hp:~$ dmesg | grep eth1
eth1: Station identity 001f:0005:0001:0003
eth1: Looks like an Intersil firmware version 1.3.5
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:40:05:AE:96:6C
eth1: Station name "Prism I"
eth1: ready
eth1: index 0x01: Vcc 3.3, irq 10, io 0x0100-0x013f
@hp:# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11Mb/s
Tx-Power=15 dBm Sensitivity:1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0/92 Signal level:-68 dBm Noise level:-122 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
@hp:/home/derfriese# ifconfig -a
eth0 Protokoll:Ethernet Hardware Adresse 00:04:76:4E:17:32
inet Adresse:192.168.1.5 Bcast:192.168.1.255
Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7124 errors:0 dropped:0 overruns:0 frame:0
TX packets:7278 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:10 Sendewarteschlangenlänge:1000
RX bytes:8866935 (8.4 MiB) TX bytes:510021 (498.0 KiB)
Interrupt:10 Basisadresse:0x1400
eth1 Protokoll:Ethernet Hardware Adresse 00:40:05:AE:96:6C
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:10 Basisadresse:0x100
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:72 errors:0 dropped:0 overruns:0 frame:0
TX packets:72 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:4740 (4.6 KiB) TX bytes:4740 (4.6 KiB)
hp:/home/derfriese# cardctl ident
Socket 0:
product info: "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",""
manfid: 0x0156, 0x0002
function: 6 (network)
so oben steht was von Prism I
hier die geladenen module , da ich mir nicht sicher was welches das
richtige ist hab ich beim kernel bau mal alle mit genommen um zu sehen
welche er sich automatisch nimmt das sind nun die orinoco geschichten...
?
ist dad so richtig ?
lsmod
Module Size Used by
orinoco_cs 7048 1
orinoco 35844 1 orinoco_cs
hermes 6816 2 orinoco_cs,orinoco
irda 164088 0
apm 15168 2
hid 29088 0
agpgart 25708 0
8250 17568 0
serial_core 17184 1 8250
parport_pc 26752 0
lp 8068 0
parport 21280 2 parport_pc,lp
uhci_hcd 26248 0
maestro3 29576 1
soundcore 6976 2 maestro3
ac97_codec 15552 1 maestro3
3c59x 33160 0
usbkbd 5632 0
usbcore 84436 5 hid,uhci_hcd,usbkbd
habe leider noch keine moeglichkeit das richitg auszuprobieren da ich
keinen access point hier habe .... wie kann ich testen ob das ding
wirklich funst ?
hab mal versucht kismet zum laufen zu bringen bei der oben angegeben
konfiguration da kommt es zu folgender ausgabe
hp:/home/derfriese# kismet
Server options: none
Client options: none
Starting server...
Waiting for server to finish starting before startuing UI...
Suid priv-dropping disabled. This may not be secure.
No enable sources specified, all sources will be enabled.
Source 0 (orinocosource): Using pcap to capture packets from eth1
Source 0 (orinocosource): Attempting to enter monitor mode.
Enabling monitor mode for an orinoco card on eth1 channel 6
Invalid command : monitor
Source orinocosource: Created child capture process 769
Enabling channel hopping.
Disabling channel splitting.
Allowing clients to fetch WEP keys.
FATAL: capture child 769 packet buffer empty and flagged as diseased,
exiting
WARNING: Disabling GPS logging.
Logging networks to /var/log/kismet/Kismet-Mar-03-2004-1.network
Logging networks in CSV format to
/var/log/kismet/Kismet-Mar-03-2004-1.csv
Logging networks in XML format to
/var/log/kismet/Kismet-Mar-03-2004-1.xml
Logging cryptographically weak packets to
/var/log/kismet/Kismet-Mar-03-2004-1.weak
Logging cisco product information to
/var/log/kismet/Kismet-Mar-03-2004-1.cisco
Logging data to /var/log/kismet/Kismet-Mar-03-2004-1.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Reading AP manufacturer data and defaults from //etc/kismet/ap_manuf
Reading client manufacturer data and defaults from
//etc/kismet/client_manuf
Dump file format: wiretap (ethereal libwiretap) dump
Crypt file format: airsnort (weak packet) dump
Kismet 3.0.1 (Kismet)
Logging data networks CSV XML weak cisco
Listening on port 2501.
Allowing connections from 127.0.0.1/255.255.255.255
Registering builtin client/server protocols...
Registering requested alerts...
Registering builtin timer events...
Enabling packet source 0 (orinocosource)...
Gathering packets...
Shutting down source 0 (orinocosource)...
Didn't detect any networks, unlinking network list.
Didn't detect any networks, unlinking CSV network list.
Didn't detect any networks, unlinking XML network list.
Didn't detect any Cisco Discovery Packets, unlinking cisco dump
Starting UI...
FATAL: Could not connect to 127.0.0.1:2501.
Client exited, terminating...
Done. Run kismet_unmonitor or eject and re-insert your card (or restart
your
pcmcia services) to return your card to normal operation.
root@hp:/home/derfriese# Didn't capture any packets, unlinking dump file
Didn't see any weak encryption packets, unlinking weak file
Waiting for capture child 769 to terminate...
Kismet exiting.
mal ganz neben bei ... ich beschaeftige mich grad damit weil es teil
meiner abschluss arbeit wird :-/ und nicht weil ich intensives
WarXing betreiben will ;-))
bis dahin hofffe ihr habt nen tip fuer mich
gruss TORBEN
Reply to: