Dial-on-Demand mit FritzCard DSL funzt nicht
Hallo
Ich hoffe hiebei kann mir jemand helfen.
Also, ich benutze die FritzCard DSL, Kernel 2.4.24 und pppd 2.4.2. Mit pon
komme ich mit folgenden Einwahlscripts über 1&1 ohne
Probs ins Netz.
/etc/ppp/peers/provider:
# DSL connection using CAPI interface (Fritz!Card DSL)
plugin capiplugin.so
debug
sync
noauth
#demand
connect ""
defaultroute
noproxyarp
ipcp-accept-remote
ipcp-accept-local
avmadsl
/dev/null
# Plugin userpass enables us to pipe the password to pppd, thus we
# don't have to put it into pap-secrets and chap-secrets.
plugin userpass.so
user "1und1/XXXX-XX@online.de"
password XXXXXX
# pppoe has a lower mtu/mru
mtu 1492
mru 1492
# this is recommended
noccp
noipx
noipdefault
usepeerdns
idle 120
In /var/log/syslog bekomme ich dann folgende Meldung:
Jan 27 07:59:26 hugo-stable pppd[3603]: Plugin capiplugin.so loaded.
Jan 27 07:59:26 hugo-stable pppd[3603]: capiplugin: $Revision: 1.32 $
Jan 27 07:59:26 hugo-stable pppd[3603]: capiconn: 1.7
Jan 27 07:59:26 hugo-stable kernel: kcapi: appl 1 up
Jan 27 07:59:26 hugo-stable pppd[3603]: Plugin userpass.so loaded.
Jan 27 07:59:26 hugo-stable pppd[3603]: userpass: $Revision: 1.4 $
Jan 27 07:59:26 hugo-stable pppd[3605]: pppd 2.4.2 started by root, uid 0
Jan 27 07:59:26 hugo-stable pppd[3605]: capiplugin: phase serialconn.
Jan 27 07:59:26 hugo-stable pppd[3605]: loading adsl parameters
from /etc/drdsl/adsl.conf ...
Jan 27 07:59:26 hugo-stable pppd[3605]: capiplugin: contr=2
Jan 27 07:59:26 hugo-stable pppd[3605]: controller 2: listen_change_state 0 ->
1
Jan 27 07:59:26 hugo-stable pppd[3605]: contr 2: listenconf Info=0x0000 (No
additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
Jan 27 07:59:26 hugo-stable pppd[3605]: controller 2: listen_change_state 1 ->
0
Jan 27 07:59:26 hugo-stable pppd[3605]: plci_change_state:0x0 0 -> 1 event=1
Jan 27 07:59:26 hugo-stable pppd[3605]: capiplugin: leased line (adslpppoe)
Jan 27 07:59:26 hugo-stable pppd[3605]: plci_change_state:0x102 1 -> 2 event=3
Jan 27 07:59:26 hugo-stable kernel: kcapi: appl 1 ncci 0x10102 up
Jan 27 07:59:26 hugo-stable pppd[3605]: plci_change_state:0x102 2 -> 3 event=6
Jan 27 07:59:26 hugo-stable pppd[3605]: ncci_change_state:0x102 0 -> 1 event=1
Jan 27 07:59:26 hugo-stable pppd[3605]: ncci_change_state:0x10102 1 -> 3
event=3
Jan 27 07:59:26 hugo-stable pppd[3605]: ncci_change_state:0x10102 3 -> 4
event=7
Jan 27 07:59:26 hugo-stable pppd[3605]: ncci 0x10102 up
Jan 27 07:59:26 hugo-stable pppd[3605]: capiplugin: connected: "" -> ""
outgoing (pcli=0x102/ncci=0x10102)
Jan 27 07:59:26 hugo-stable pppd[3605]: capiplugin: using /dev/capi/0: "" ->
"" outgoing (pcli=0x102/ncci=0x10102)
Jan 27 07:59:27 hugo-stable pppd[3605]: using channel 8
Jan 27 07:59:27 hugo-stable pppd[3605]: Using interface ppp0
Jan 27 07:59:27 hugo-stable pppd[3605]: Connect: ppp0 <--> /dev/capi/0
Jan 27 07:59:27 hugo-stable pppd[3605]: capiplugin: phase establish (was
serialconn).
Jan 27 07:59:27 hugo-stable pppd[3605]: rcvd [LCP ConfReq id=0xe2 <mru 1492>
<auth pap> <magic 0x42d05edf>]
Jan 27 07:59:27 hugo-stable pppd[3605]: sent [LCP ConfReq id=0x1 <mru 1492>
<asyncmap 0x0> <magic 0xacead139> <pcomp> <accomp>]
Jan 27 07:59:27 hugo-stable pppd[3605]: sent [LCP ConfAck id=0xe2 <mru 1492>
<auth pap> <magic 0x42d05edf>]
Jan 27 07:59:27 hugo-stable pppd[3605]: rcvd [LCP ConfAck id=0x1 <mru 1492>
<asyncmap 0x0> <magic 0xacead139> <pcomp> <accomp>]
Jan 27 07:59:27 hugo-stable pppd[3605]: capiplugin: phase authenticate (was
establish).
Jan 27 07:59:27 hugo-stable pppd[3605]: sent [PAP AuthReq id=0x1
user="1und1/XXXX-XXX@online.de" password=<hidden>]
Jan 27 07:59:27 hugo-stable pppd[3605]: rcvd [PAP AuthAck id=0x1 ""]
Jan 27 07:59:27 hugo-stable pppd[3605]: PAP authentication succeeded
Jan 27 07:59:27 hugo-stable pppd[3605]: capiplugin: phase network (was
authenticate).
Jan 27 07:59:27 hugo-stable pppd[3605]: sent [IPCP ConfReq id=0x1 <compress VJ
0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jan 27 07:59:27 hugo-stable pppd[3605]: rcvd [IPCP ConfReq id=0x83 <addr
217.5.98.26>]
Jan 27 07:59:27 hugo-stable pppd[3605]: sent [IPCP ConfAck id=0x83 <addr
217.5.98.26>]
Jan 27 07:59:27 hugo-stable pppd[3605]: rcvd [IPCP ConfRej id=0x1 <compress VJ
0f 01>]
Jan 27 07:59:27 hugo-stable pppd[3605]: sent [IPCP ConfReq id=0x2 <addr
0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Jan 27 07:59:27 hugo-stable pppd[3605]: rcvd [IPCP ConfNak id=0x2 <addr
80.130.75.6> <ms-dns1 212.185.248.116> <ms-dns3 194.25.2.129>]
Jan 27 07:59:27 hugo-stable pppd[3605]: sent [IPCP ConfReq id=0x3 <addr
80.130.75.6> <ms-dns1 212.185.248.116> <ms-dns3 194.25.2.129>]
Jan 27 07:59:28 hugo-stable pppd[3605]: rcvd [IPCP ConfAck id=0x3 <addr
80.130.75.6> <ms-dns1 212.185.248.116> <ms-dns3 194.25.2.129>]
Jan 27 07:59:28 hugo-stable pppd[3605]: local IP address 80.130.75.6
Jan 27 07:59:28 hugo-stable pppd[3605]: remote IP address 217.5.98.26
Jan 27 07:59:28 hugo-stable pppd[3605]: primary DNS address 212.185.248.116
Jan 27 07:59:28 hugo-stable pppd[3605]: secondary DNS address 194.25.2.129
Jan 27 07:59:28 hugo-stable pppd[3605]: capiplugin: phase running (was
network).
Jan 27 07:59:28 hugo-stable pppd[3605]: Script /etc/ppp/ip-up started (pid
3607)
Jan 27 07:59:28 hugo-stable pppd[3605]: Script /etc/ppp/ip-up finished (pid
3607), status = 0x0
Auf den ersten Blich sieht alles ok aus. Benutze ich nun DoD mit
pon, also # vor demand löschen, bekomme ich nun folgende Meldungungen
in /var/log/syslog:
Jan 27 08:04:19 hugo-stable pppd[3631]: Plugin capiplugin.so loaded.
Jan 27 08:04:19 hugo-stable pppd[3631]: capiplugin: $Revision: 1.32 $
Jan 27 08:04:19 hugo-stable pppd[3631]: capiconn: 1.7
Jan 27 08:04:19 hugo-stable kernel: kcapi: appl 1 up
Jan 27 08:04:19 hugo-stable pppd[3631]: Plugin userpass.so loaded.
Jan 27 08:04:19 hugo-stable pppd[3631]: userpass: $Revision: 1.4 $
Jan 27 08:04:19 hugo-stable pppd[3633]: pppd 2.4.2 started by root, uid 0
Jan 27 08:04:19 hugo-stable pppd[3633]: Using interface ppp0
Jan 27 08:04:19 hugo-stable pppd[3633]: local IP address 10.64.64.64
Jan 27 08:04:19 hugo-stable pppd[3633]: remote IP address 10.112.112.112
Jan 27 08:04:19 hugo-stable pppd[3633]: capiplugin: phase dormant.
Jan 27 08:04:19 hugo-stable pppd[3633]: loading adsl parameters
from /etc/drdsl/adsl.conf ...
Jan 27 08:04:19 hugo-stable pppd[3633]: capiplugin: contr=2
Jan 27 08:04:19 hugo-stable pppd[3633]: controller 2: listen_change_state 0 ->
1
Jan 27 08:04:19 hugo-stable pppd[3633]: contr 2: listenconf Info=0x0000 (No
additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
Jan 27 08:04:19 hugo-stable pppd[3633]: controller 2: listen_change_state 1 ->
0
ifconfig gibt folgende Meldung:
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.64.64.64 P-t-P:10.112.112.112 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
und route schmeisst folgende Zeichen auf den Schirm:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.112.112.112 * 255.255.255.255 UH 0 0 0 ppp0
localnet * 255.255.255.0 U 0 0 0 eth0
default 10.112.112.112 0.0.0.0 UG 0 0 0 ppp0
sorry für die Formatierung.
Wenn ich nun versuche zu pingen oder mit mozilla eine Seite anzuwhlen passiert
nichts bzw. Fehlermeldung Seite kann nicht gefunden werden.
Hat irgendwer eine Idee was ich falsch mache und was getan werden muss damit
ich es hinbekomme.
Danke im voraus
Gruss
Matthias
Reply to: