160 gb Platte läuft nur mit 30 GB
Hallo!
Ich versuche verzweifelt eine 160 GB Platte zum laufen zu bekommen!
Ich möchte nicht von dieser Platte booten, es ist ein reiner Datenspeicher.
Ich nutze den Kernel 2.4.22
Die Platte wird erkannt:
........... dmesg ...........
hdd: attached ide-disk driver.
hdd: Host Protected Area detected.
current capacity is 66055248 sectors (33820 MB)
native capacity is 312581808 sectors (160041 MB)
hdd: 66055248 sectors (33820 MB) w/8192KiB Cache, CHS=4111/255/63, UDMA(33)
........... dmesg ...........
Wie Ihr seht läuft die Platte nur mit 32 GB - ich möchte allerdings die
160 GB nutzen.
Ich habe viele Howtos gelesen, unzählige Websites angesehen, aber leider
nichts gefunden, was funktioniert.
Hat jemand eine Idee ?
Vielen Dank !
Mark
Folgendes würde wohl funktionieren, aber wie ?
---------------------- virtuelle Abreisskante ----------------------
About 5 months ago, a patch to ide-disk.c was applied creating
revision 1.13 with the comment "PATCH: resync IDE with -ac".
http://linux.bkbits.net:8080/linux-2.4/diffs/drivers/ide/ide-disk.c@1.13?nav=index.html|src/|src/drivers|src/drivers/ide|hist/drivers/ide/ide-disk.c
<http://linux.bkbits.net:8080/linux-2.4/diffs/drivers/ide/ide-disk.c@1.13?nav=index.html%7Csrc/%7Csrc/drivers%7Csrc/drivers/ide%7Chist/drivers/ide/ide-disk.c>
The linked patch added the IDE_STROKE_LIMIT macro and uses this
macro in a couple of tests. Anybody know what the intent of this
IDE_STROKE_LIMIT macro is? I ask since it completely breaks
CONFIG_IDEDISK_STROKE and I can't see any reason for it being
there. It looks to me like it just needs to be ripped right back
out. Am I missing something?
I have created the following patch which makes this option work
as expected once again in 2.4.x. It also removes the irrelevant
idedisk_supports_host_protected_area() and makes the HPA
detection actually display useful information for a change, i.e.,
when CONFIG_IDEDISK_STROKE is disabled you get something like:
hdb: Host Protected Area detected.
current capacity is 30001 sectors (15 MB)
native capacity is 234441648 sectors (120034 MB)
hdb: 30001 sectors (15 MB) w/2048KiB Cache, CHS=29/16/63, UDMA(100)
and when CONFIG_IDEDISK_STROKE is enabled you get:
hdb: Host Protected Area detected.
current capacity is 30001 sectors (15 MB)
native capacity is 234441648 sectors (120034 MB)
hdb: Host Protected Area Disabled
hdb: 234441648 sectors (120034 MB) w/2048KiB Cache,
CHS=232581/16/63, UDMA(100)
Thanks,
-Erik
--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--
--- linux/drivers/ide/ide-disk.c.orig +++ linux/drivers/ide/ide-disk.c
@@ -69,6 +69,7 @@ #include <asm/irq.h> #include <asm/uaccess.h> #include
<asm/io.h> +#include <asm/div64.h> /* FIXME: some day we shouldnt need
to look in here! */ @@ -1131,18 +1132,6 @@ #endif /*
CONFIG_IDEDISK_STROKE */ /* - * Tests if the drive supports Host
Protected Area feature. - * Returns true if supported, false otherwise.
- */ -static inline int idedisk_supports_host_protected_area(ide_drive_t
*drive) -{ - int flag = (drive->id->cfs_enable_1 & 0x0400) ? 1 : 0; - if
(flag) - printk("%s: host protected area => %d\n", drive->name, flag); -
return flag; -} - -/* * Compute drive->capacity, the full capacity of
the drive * Called with drive->id != NULL. * @@ -1156,7 +1145,6 @@ * in
above order (i.e., if value of higher priority is available, * reset
will be ignored). */ -#define IDE_STROKE_LIMIT (32000*1024*2) static
void init_idedisk_capacity (ide_drive_t *drive) { struct hd_driveid *id
= drive->id; @@ -1168,8 +1156,6 @@ drive->capacity48 = 0;
drive->select.b.lba = 0; - (void)
idedisk_supports_host_protected_area(drive); - if (id->cfs_enable_2 &
0x0400) { capacity_2 = id->lba_capacity_2; drive->head =
drive->bios_head = 255; @@ -1177,7 +1163,19 @@ drive->cyl = (unsigned
int) capacity_2 / (drive->head * drive->sect); drive->select.b.lba = 1;
set_max_ext = idedisk_read_native_max_address_ext(drive); - if
(set_max_ext > capacity_2 && capacity_2 > IDE_STROKE_LIMIT) { + if
(set_max_ext > capacity_2) + { + /* Sigh. We can not just divide
unsigned long longs... */ + unsigned long long nativeMb, currentMb; +
nativeMb = set_max_ext * 512; + currentMb = capacity_2 * 512; + /*
do_div is a macro so we can not safely combine steps */ + nativeMb =
do_div(nativeMb, 1000000); + currentMb = do_div(currentMb, 1000000); +
printk(KERN_INFO "%s: Host Protected Area detected.\n" + " current
capacity is %lld sectors (%lld MB)\n" + " native capacity is %lld
sectors (%lld MB)\n", + drive->name, capacity_2, currentMb, set_max_ext,
nativeMb); #ifdef CONFIG_IDEDISK_STROKE set_max_ext =
idedisk_read_native_max_address_ext(drive); set_max_ext =
idedisk_set_max_address_ext(drive, set_max_ext); @@ -1186,13 +1184,10 @@
drive->cyl = (unsigned int) set_max_ext / (drive->head * drive->sect);
drive->select.b.lba = 1; drive->id->lba_capacity_2 = capacity_2; +
printk(KERN_INFO "%s: Host Protected Area Disabled\n", drive->name); }
-#else /* !CONFIG_IDEDISK_STROKE */ - printk(KERN_INFO "%s: setmax_ext
LBA %llu, native %llu\n", - drive->name, set_max_ext, capacity_2);
#endif /* CONFIG_IDEDISK_STROKE */ } - drive->cyl = (unsigned int)
capacity_2 / (drive->head * drive->sect); drive->bios_cyl = drive->cyl;
drive->capacity48 = capacity_2; drive->capacity = (unsigned long)
capacity_2; @@ -1204,7 +1199,14 @@ drive->select.b.lba = 1; } - if
(set_max > capacity && capacity > IDE_STROKE_LIMIT) { + if (set_max >
capacity) + { + printk(KERN_INFO "%s: Host Protected Area detected.\n" +
" current capacity is %ld sectors (%ld MB)\n" + " native capacity is %ld
sectors (%ld MB)\n", + drive->name, capacity, + (capacity - capacity/625
+ 974)/1950, + set_max, (set_max - set_max/625 + 974)/1950); #ifdef
CONFIG_IDEDISK_STROKE set_max = idedisk_read_native_max_address(drive);
set_max = idedisk_set_max_address(drive, set_max); @@ -1213,10 +1215,8
@@ drive->cyl = set_max / (drive->head * drive->sect);
drive->select.b.lba = 1; drive->id->lba_capacity = capacity; +
printk(KERN_INFO "%s: Host Protected Area Disabled\n", drive->name); }
-#else /* !CONFIG_IDEDISK_STROKE */ - printk(KERN_INFO "%s: setmax LBA
%lu, native %lu\n", - drive->name, set_max, capacity); #endif /*
CONFIG_IDEDISK_STROKE */ } - To unsubscribe from this list: send the
line "unsubscribe linux-kernel" in the body of a message to
majordomo@vger.kernel.org
<mailto:majordomo@vger.kernel.org?Subject=Re:%20ide-disk.c%20rev%201.13%20killed%20CONFIG_IDEDISK_STROKE&In-Reply-To=%3C20030802084205.GA2033@codepoet.org%3E>
More majordomo info at http://vger.kernel.org/majordomo-info.html Please
read the FAQ at http://www.tux.org/lkml/
---------------------- virtuelle Abreisskante ----------------------
Reply to: