[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: isdn - no route ?



> Nur um es auszuschließen: Kann's sein, daß Du einen Anlagen-Anschluß
> hast und fürs Amt eine 0 vorwählen mußt?
Nein - ich habs vorsichtshalber mal ausprobiert.

> Schau noch mal in /var/log/isdn/isdnlog rein !
Hier der Output:
--------------------
isdnlog Version 4.57 starting
Holiday Version 1.10-Germany [12-Apr-1999] loaded [11 entries from
/usr/share/isdn/holiday-de.dat]
Dest V1.01: File '/usr/share/isdn/dest.cdb' opened fine - Dest 1.0 int (+h)
AT DE NL CH
Zone V1.25: Provider 0 File '/usr/share/isdn/zone-de-dtag.cdb' opened fine -
V1.25 K2 C2 N256 T157147 O1 L5
Rates   Version 2.02 [10-Mar-2002 19:03:33] loaded [51 Providers, 387 Zones,
1780 Areas, 42 Services, 310 Comments, 0 eXceptions, 6 Redirects, 1220 Rates
from /usr/share/isdn/rate-de.dat]
(ISDN subsystem with ISDN_MAX_CHANNELS > 16 detected, ioctl(IIOCNETGPN) is
available)
isdn.conf:2 active channels, 0 MSN/SI entries
(Data versions: iprofd=0x06  net_cfg=0x06  /dev/isdninfo=0x01)
Everything is fine, isdnlog-4.57 is running in full featured mode.
(HiSax driver detected)Oct 30 10:53:55 * tei 96 calling 0193885 with +49
541/1814694, Osnabrück  RING (Data)
Oct 30 10:53:55 tei 96 calling 0193885 with +49 541/1814694, Osnabrück  No
route to destination (Public network serving local user)
Oct 30 10:53:56 tei 96 calling 0193885 with +49 541/1814694, Osnabrück
HANGUP No route to destination (Public network serving local user)
--------------------

> Poste mal den output von route (-n).
Hier:
--"route"------------------
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
10.0.0.2        *               255.255.255.255 UH    0      0        0
ippp0
localnet        *               255.255.255.0   U     0      0        0 eth0
default         *               0.0.0.0         U     0      0        0
ippp0
--------------------
--"route -n"------------------
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
10.0.0.2        0.0.0.0         255.255.255.255 UH    0      0        0
ippp0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
0.0.0.0         0.0.0.0         0.0.0.0         U     0      0        0
ippp0
--------------------

> Hast du vielleicht bei deinem Telefonanschluss die 019x-Nummern
> zum Dialerschutz gesperrt?
Nein.

Danke fürs lesen und drüber nachdenken !

Tobias





Reply to: