AW: pppoe
Ok, dann hier mal ein Auszug aus den Logs.
Aug 4 09:46:24 redglow kernel: Linux version 2.2.20-idepci
(herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Apr 20 12:45:19 EST 2002
...
Aug 4 09:46:24 redglow kernel: Serial driver version 4.27 with HUB-6
MANY_PORTS MULTIPORT SHARE_IRQ enabled
Aug 4 09:46:24 redglow kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Aug 4 09:46:24 redglow kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Aug 4 09:46:24 redglow kernel: pty: 256 Unix98 ptys configured
Aug 4 09:46:24 redglow kernel: loop: registered device at major 7
...
Aug 4 09:46:24 redglow kernel: 3c59x.c 18Feb01 Donald Becker and others
http://www.scyld.com/network/vortex.html
Aug 4 09:46:24 redglow kernel: pcnet32.c: PCI bios is present, checking
for devices...
Aug 4 09:46:24 redglow kernel: rtl8139.c:v1.07 5/6/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
Aug 4 09:46:24 redglow kernel: eth0: RealTek RTL8139 Fast Ethernet at
0xe800, IRQ 11, 00:00:b4:aa:97:cd.
...
Aug 4 09:46:24 redglow kernel: eth1: 8139too Fast Ethernet driver
0.9.18-pre4 Jeff Garzik <jgarzik@mandrakesoft.com>
Aug 4 09:46:24 redglow kernel: eth1: Linux-2.2 bug reports to Jens
David <dg1kjd@afthd.tu-darmstadt.de>
Aug 4 09:46:24 redglow kernel: eth1: RealTek RTL8139 Fast Ethernet
board found at 0xd0031000, IRQ 11
Aug 4 09:46:24 redglow kernel: eth1: Chip is 'RTL-8139A' - MAC address
'00:00:b4:aa:97:cd'.
Aug 4 09:46:24 redglow kernel: parport0: PC-style at 0x378
[SPP,PS2,EPP]
Aug 4 09:46:24 redglow kernel: lp0: using parport0 (polling).
Aug 4 09:46:24 redglow kernel: CSLIP: code copyright 1989 Regents of
the University of California
Aug 4 09:46:24 redglow kernel: PPP: version 2.3.7 (demand dialling)
Aug 4 09:46:24 redglow kernel: PPP line discipline registered.
Aug 4 09:46:24 redglow kernel: registered device ppp0
Aug 4 09:46:24 redglow pppd[217]: pppd 2.4.1 started by root, uid 0
Aug 4 09:46:24 redglow pppd[217]: Serial connection established.
Aug 4 09:46:24 redglow pppd[217]: Using interface ppp0
Aug 4 09:46:24 redglow pppd[217]: Connect: ppp0 <--> /dev/pts/0
Aug 4 09:46:26 redglow pppd[217]: local IP address 82.82.68.122
Aug 4 09:46:26 redglow pppd[217]: remote IP address 145.253.4.6
Aug 4 09:46:26 redglow pppd[217]: primary DNS address 145.253.2.203
Aug 4 09:46:26 redglow pppd[217]: secondary DNS address 145.253.2.80
Aug 4 09:46:36 redglow lpd[289]: restarted
Das ist ein Auszug vom Log, wo DSL geht und nun ein Auszug, wos nicht
geht.
Aug 7 12:28:15 redglow syslogd 1.4.1#10: restart.
Aug 7 12:28:16 redglow kernel: Linux version 2.4.21 (root@redglow) (gcc
version 2.95.4 20011002 (Debian prerelease)) #8 SMP Wed Aug 6 19:06:38
CEST 2003
...
Aug 7 12:28:16 redglow kernel: pty: 256 Unix98 ptys configured
Aug 7 12:28:16 redglow kernel: Serial driver version 5.05c (2001-07-08)
with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Aug 7 12:28:16 redglow kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Aug 7 12:28:16 redglow kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
...
Aug 7 12:28:16 redglow kernel: PPP generic driver version 2.4.2
Aug 7 12:28:16 redglow kernel: PPP Deflate Compression module
registered
Aug 7 12:28:16 redglow kernel: 8139cp: 10/100 PCI Ethernet driver
v0.3.0 (Sep 29, 2002)
Aug 7 12:28:16 redglow kernel: 8139too Fast Ethernet driver 0.9.26
Aug 7 12:28:16 redglow kernel: PCI: Found IRQ 11 for device 00:0e.0
Aug 7 12:28:16 redglow kernel: eth0: RealTek RTL8139 Fast Ethernet at
0xd2804000, 00:00:b4:aa:97:cd, IRQ 11
Aug 7 12:28:16 redglow kernel: Linux agpgart interface v0.99 (c) Jeff
Hartmann
...
Aug 7 12:28:16 redglow kernel: eth0: Setting 100mbps full-duplex based
on auto-negotiated partner ability 41e1.
Aug 7 12:28:16 redglow pppd[190]: pppd 2.4.1 started by root, uid 0
Aug 7 12:28:17 redglow pppd[190]: Serial connection established.
Aug 7 12:28:17 redglow pppd[190]: Using interface ppp0
Aug 7 12:28:17 redglow pppd[190]: Connect: ppp0 <--> /dev/pts/0
Aug 7 12:28:17 redglow pppd[190]: Modem hangup
Aug 7 12:28:17 redglow pppd[190]: Connection terminated.
Aug 7 12:28:17 redglow pppd[190]: Exit.
Weiß nicht, was das soll.
Nun noch die debug ausgabe von pon dsl-provider
Serial connection established.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
pppoe: socket: Session 0: Address family not supported by protocol
Script pppoe -I eth0 finished (pid 559), status = 0x1
Modem hangup
Connection terminated.
Irgendwie gibt es mit dem alten Kernel noch ein device eth1, wo ich ja
nur eine Netzwerkkarte habe. Komisch.
Ich hoffe damit kann jemand was anfangen.
Danke
[-----Ursprüngliche Nachricht-----
[Von: Rohnke, Stefan [mailto:Stefan.Rohnke@ml.niedersachsen.de]
[Gesendet: Donnerstag, 7. August 2003 11:14
[An: 'Rico Saupe'
[Betreff: AW: pppoe
[
[
[Hallo Rico,
[
[normalerweise erscheint PPP0 doch immer srst, nachdem die
[Verbindung zum Provider hochgezogen wurde. Wird bei dir
[eine automatische Verbindung hergestellt? Was sagt denn
[/var/log/messages dazu?
[
[Gruß Stefan
[
Reply to: