Re: Debian woody 2.4.18-bf2.4 - CD-Brenner tuts nicht
Am Son, 2003-05-25 um 09.14 schrieb Peter:
Hallo Peter,
wie Du sicher in der Liste gelesen hast, schlage ich mich mit dem
gleichen Problem unter den gleichen Voraussetzungen herum.
Das Problem ist: ide-cd ist im Kernel einkompiliert. Es muß ein neuer
Kernel ohne ide-cd kompiliert werden
Andreas
> Hallo allerseits,
>
> ich habe versucht, meinen CD-Brenner unter Debian einzubinden.
> Will ich ihn mounten, kommt die Fehlermeldung:
> mount: /dev/cdrw is not a valid block device
>
> System: Obiges Linux, 2 Festplatten, ein CD-Rom, ein CD-Brenner
> (alles IDE)
>
> Vorgehensweise:
> Als Root mit modconf ide-scsi laden lassen
> etc/lilo.conf editiert und die Zeile append="hdc=ide-scsi" hinzugefügt,
> da dmesg | more zeigte, dass hdc mein Brenner ist.
> /sbin/lilo ausgeführt und die Datei bootsec.lin auf c: kopiert, da ich
> Linux über den Bootloader von XP auf C: starte.
> reboot
> mount-point /cdrw mit mkdir /cdrw angelegt
> dann:
> cd /dev
> MAKEDEV sg scd
> ln -sf scd0 cdrw
>
> in /etc/fstab eingetragen:
> /dev/cdrw /cdrw iso9660 ro,user,noauto 0 0
>
> in der /etc/modules ist ide-scsi drin
>
> Nichtsdestotrotz funktioniert es nicht. Wo ist der Fehler?
> Gruss.
> Peter.
>
> lsmod zeigt:
> debian:~# lsmod
> Module Size Used by Tainted: PF
> vmnet 18048 6
> vmmon 22924 0 (unused)
> parport_pc 25704 1 (autoclean)
> lp 6912 0 (autoclean)
> nls_cp437 4384 2 (autoclean)
> sg 24452 0 (unused)
> ide-scsi 7488 0
> scanner 8480 0 (unused)
> msdos 4668 0 (unused)
> es1371 27840 0
> gameport 1308 0 [es1371]
> ac97_codec 9568 0 [es1371]
> soundcore 3236 4 [es1371]
> parport 21728 1 [parport_pc lp]
> via-rhine 12452 1
> agpgart 29824 0 (unused)
> keybdev 1664 0 (unused)
> usbkbd 2848 0 (unused)
> input 3072 0 [keybdev usbkbd]
> usb-uhci 20708 0 (unused)
> usbcore 48032 0 [scanner usbkbd usb-uhci]
>
> dmesg | more zeigt unter anderem:
> debian:~# dmesg | more
> Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002
> (Debian prerelease))
> #1 Son Apr 14 09:53:28 CEST 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffeb000 (usable)
> BIOS-e820: 000000001ffeb000 - 000000001ffef000 (ACPI data)
> BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> On node 0 totalpages: 131051
> zone(0): 4096 pages.
> zone(1): 126955 pages.
> zone(2): 0 pages.
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Kernel command line: auto BOOT_IMAGE=Linux ro root=345
> Initializing CPU#0
> Detected 804.037 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1605.63 BogoMIPS
> Memory: 512660k/524204k available (1783k kernel code, 11156k reserved, 549k
> data, 280k ini
> t, 0k highmem)
> Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
> CPU: Common caps: 0383fbff 00000000 00000000 00000000
> CPU: Intel Pentium III (Coppermine) stepping 06
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> Checking for popad bug... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 804.0237 MHz.
> ..... host bus clock speed is 134.0038 MHz.
> cpu: 0, clocks: 1340038, slice: 670019
> CPU0<T0:1340032,T1:670000,D:13,S:670019,C:1340038>
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xf0d90, last bus=2
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> VFS: Diskquotas version dquot_6.4.0 initialized
> Journalled Block Device driver loaded
> vga16fb: initializing
> vga16fb: mapped to 0xc00a0000
> Console: switching to colour frame buffer device 80x30
> fb0: VGA16 VGA frame buffer device
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Real Time Clock Driver v1.10e
> block: 128 slots per queue, batch=32
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev f9
> PIIX4: chipset revision 2
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
> hda: QUANTUM FIREBALLP AS60.0, ATA DISK drive
> hdb: IBM-DTLA-305040, ATA DISK drive
> hdc: CD-W58E, ATAPI CD/DVD-ROM drive
> hdd: ATAPI CDROM 48X, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: 117266688 sectors (60041 MB) w/1902KiB Cache, CHS=7299/255/63
> hdb: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=5005/255/63
> hdc: ATAPI 32X CD-ROM CD-R/RW drive, 1280kB Cache
> Uniform CD-ROM driver Revision: 3.12
> hdd: ATAPI CD-ROM drive, 128kB Cache
> ide-floppy driver 0.97.sv
> Partition check:
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 >
> hdb: hdb1 < hdb5 hdb6 hdb7 >
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> Loading I2O Core - (c) Copyright 1999 Red Hat Software
> I2O configuration manager v 0.04.
> (C) Copyright 1999 Red Hat Software
> loop: loaded (max 8 devices)
> Compaq CISS Driver (v 2.4.5)
> HDLC support module revision 1.02 for Linux 2.4
> Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
> Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
> ide-floppy driver 0.97.sv
> Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
> Highpoint HPT370 Softwareraid driver for linux version 0.01
> No raid array found
> SCSI subsystem driver Revision: 1.00
> Red Hat/Adaptec aacraid driver, Apr 14 2002
> DC390: 0 adapters found
> 3ware Storage Controller device driver for Linux v1.02.00.016.
> 3w-xxxx: No cards with valid units found.
> request_module[scsi_hostadapter]: Root fs not mounted
> request_module[scsi_hostadapter]: Root fs not mounted
> i2o_scsi.c: Version 0.0.1
> chain_pool: 0 bytes @ c1853500
> (512 byte buffers X 4 can_queue X 0 i2o controllers)
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 32768)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Freeing unused kernel memory: 280k freed
> Adding Swap: 514040k swap-space (priority -1)
> EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,69), internal journal
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
> usb-uhci.c: High bandwidth mode enabled
> PCI: Found IRQ 5 for device 00:1f.2
> PCI: Setting latency timer of device 00:1f.2 to 64
> usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 1
> hub.c: USB hub found
> hub.c: 2 ports detected
> PCI: Found IRQ 9 for device 00:1f.4
> PCI: Sharing IRQ 9 with 02:0b.0
> PCI: Setting latency timer of device 00:1f.4 to 64
> usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 9
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned bus number 2
> hub.c: USB hub found
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> usb.c: registered new driver keyboard
> usbkbd.c: :USB HID Boot Protocol keyboard driver
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: agpgart: Detected an Intel i815, but could not find the secondary
> device. Assumin
> g a non-integrated video card.
> agpgart: Detected Intel i815 chipset
> agpgart: AGP aperture is 64M @ 0xf8000000
> via-rhine.c:v1.10-LK1.1.13 Nov-17-2001 Written by Donald Becker
> http://www.scyld.com/network/via-rhine.html
> PCI: Found IRQ 9 for device 02:0a.0
> eth0: VIA VT6102 Rhine-II at 0xd800, 00:50:ba:23:1d:12, IRQ 9.
> eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 45e1.
> es1371: version v0.30 time 10:28:29 Apr 14 2002
> PCI: Found IRQ 9 for device 02:0c.0
> es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
> es1371: found es1371 rev 2 at io 0xd400 irq 9
> es1371: features: joystick 0x0
> ac97_codec: AC97 Audio codec, id: 0x5354:0x4d04 (Unknown)
> usb.c: registered new driver usbscanner
> scanner.c: 0.4.6:USB Scanner Driver
> hub.c: USB new device connect on bus2/1, assigned device number 2
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product -
> 4b8:10b
> usb.c: USB device 2 (vend/prod 0x46d/0xc285) is not claimed by any active
> driver.
> eth0: Setting full-duplex based on MII #8 link partner capability of 45e1.
> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
> parport0: irq 7 detected
> parport0: Printer, HEWLETT-PACKARD DESKJET 970C
> lp0: using parport0 (polling).
>
>
> --
> Haeufig gestellte Fragen und Antworten (FAQ):
> http://www.de.debian.org/debian-user-german-FAQ/
>
> Zum AUSTRAGEN schicken Sie eine Mail an debian-user-german-request@lists.debian.org
> mit dem Subject "unsubscribe". Probleme? Mail an listmaster@lists.debian.org (engl)
>
Reply to: