Debian woody 2.4.18-bf2.4 - CD-Brenner tuts nicht
Hallo allerseits,
ich habe versucht, meinen CD-Brenner unter Debian einzubinden.
Will ich ihn mounten, kommt die Fehlermeldung:
mount: /dev/cdrw is not a valid block device
System: Obiges Linux, 2 Festplatten, ein CD-Rom, ein CD-Brenner
(alles IDE)
Vorgehensweise:
Als Root mit modconf ide-scsi laden lassen
etc/lilo.conf editiert und die Zeile append="hdc=ide-scsi" hinzugefügt,
da dmesg | more zeigte, dass hdc mein Brenner ist.
/sbin/lilo ausgeführt und die Datei bootsec.lin auf c: kopiert, da ich
Linux über den Bootloader von XP auf C: starte.
reboot
mount-point /cdrw mit mkdir /cdrw angelegt
dann:
cd /dev
MAKEDEV sg scd
ln -sf scd0 cdrw
in /etc/fstab eingetragen:
/dev/cdrw /cdrw iso9660 ro,user,noauto 0 0
in der /etc/modules ist ide-scsi drin
Nichtsdestotrotz funktioniert es nicht. Wo ist der Fehler?
Gruss.
Peter.
lsmod zeigt:
debian:~# lsmod
Module Size Used by Tainted: PF
vmnet 18048 6
vmmon 22924 0 (unused)
parport_pc 25704 1 (autoclean)
lp 6912 0 (autoclean)
nls_cp437 4384 2 (autoclean)
sg 24452 0 (unused)
ide-scsi 7488 0
scanner 8480 0 (unused)
msdos 4668 0 (unused)
es1371 27840 0
gameport 1308 0 [es1371]
ac97_codec 9568 0 [es1371]
soundcore 3236 4 [es1371]
parport 21728 1 [parport_pc lp]
via-rhine 12452 1
agpgart 29824 0 (unused)
keybdev 1664 0 (unused)
usbkbd 2848 0 (unused)
input 3072 0 [keybdev usbkbd]
usb-uhci 20708 0 (unused)
usbcore 48032 0 [scanner usbkbd usb-uhci]
dmesg | more zeigt unter anderem:
debian:~# dmesg | more
Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002
(Debian prerelease))
#1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffeb000 (usable)
BIOS-e820: 000000001ffeb000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131051
zone(0): 4096 pages.
zone(1): 126955 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=Linux ro root=345
Initializing CPU#0
Detected 804.037 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1605.63 BogoMIPS
Memory: 512660k/524204k available (1783k kernel code, 11156k reserved, 549k
data, 280k ini
t, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 804.0237 MHz.
..... host bus clock speed is 134.0038 MHz.
cpu: 0, clocks: 1340038, slice: 670019
CPU0<T0:1340032,T1:670000,D:13,S:670019,C:1340038>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0d90, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP AS60.0, ATA DISK drive
hdb: IBM-DTLA-305040, ATA DISK drive
hdc: CD-W58E, ATAPI CD/DVD-ROM drive
hdd: ATAPI CDROM 48X, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 117266688 sectors (60041 MB) w/1902KiB Cache, CHS=7299/255/63
hdb: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=5005/255/63
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 1280kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI CD-ROM drive, 128kB Cache
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdb: hdb1 < hdb5 hdb6 hdb7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c1853500
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 280k freed
Adding Swap: 514040k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,69), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1f.4
PCI: Sharing IRQ 9 with 02:0b.0
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: agpgart: Detected an Intel i815, but could not find the secondary
device. Assumin
g a non-integrated video card.
agpgart: Detected Intel i815 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
via-rhine.c:v1.10-LK1.1.13 Nov-17-2001 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
PCI: Found IRQ 9 for device 02:0a.0
eth0: VIA VT6102 Rhine-II at 0xd800, 00:50:ba:23:1d:12, IRQ 9.
eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 45e1.
es1371: version v0.30 time 10:28:29 Apr 14 2002
PCI: Found IRQ 9 for device 02:0c.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xd400 irq 9
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x5354:0x4d04 (Unknown)
usb.c: registered new driver usbscanner
scanner.c: 0.4.6:USB Scanner Driver
hub.c: USB new device connect on bus2/1, assigned device number 2
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product -
4b8:10b
usb.c: USB device 2 (vend/prod 0x46d/0xc285) is not claimed by any active
driver.
eth0: Setting full-duplex based on MII #8 link partner capability of 45e1.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
lp0: using parport0 (polling).
Reply to: