AVM Fritz!PCI v2.0 und Capi
Hallo Liste,
ich habe o.g. Karte. Mit i4l funzt die Karte problemlos.
Ich wollte nun mal versuchen, mit der Karte zu faxen. Die Installation
anhand des Berichts von Pro-Linux hat eigentlich geklappt. Bis zu
depmo -a läuft alles wie es sein soll.
Doch wenn ich "capiinit start" aufrufe kommt folgende Fehlermeldung:
------
Warning: loading /lib/modules/2.4.19/misc/fcpci.o will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
/lib/modules/2.4.19/misc/fcpci.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19/misc/fcpci.o: insmod
/lib/modules/2.4.19/misc/fcpci.o failed
/lib/modules/2.4.19/misc/fcpci.o: insmod fcpci failed
ERROR: failed to load driver fcpci
----
Entsprechende Fehlermeldungen lt. "dmesg":
----
fcpci: AVM FRITZ!Card PCI driver, revision 0.2
fcpci: (fcpci built on Dec 12 2002 at 23:33:00)
fcpci: Loading...
fcpci: Driver 'fcpci' attached to stack
kcapi: driver fcpci attached
fcpci: Auto-attaching...
PCI: Found IRQ 11 for device 00:0a.0
PCI: Sharing IRQ 11 with 00:0c.0
PCI: Sharing IRQ 11 with 00:10.2
fcpci: Error: Invalid parameters (base=0x9000, irq=11)
fcpci: Not loaded.
kcapi: driver fcpci detached
fcpci: Driver 'fcpci' detached
fcpci: AVM FRITZ!Card PCI driver, revision 0.2
fcpci: (fcpci built on Dec 12 2002 at 23:33:00)
fcpci: Loading...
fcpci: Driver 'fcpci' attached to stack
kcapi: driver fcpci attached
fcpci: Auto-attaching...
PCI: Found IRQ 11 for device 00:0a.0
PCI: Sharing IRQ 11 with 00:0c.0
PCI: Sharing IRQ 11 with 00:10.2
fcpci: Error: Invalid parameters (base=0x9000, irq=11)
fcpci: Not loaded.
kcapi: driver fcpci detached
fcpci: Driver 'fcpci' detached
------
Hab' leider keine Idee mehr was da stört. Bei anderen läuft es ja.
Hat jemand eine Idee?
Vielen Dank für Eure Hilfe.
Gruß
Ralph
Reply to: