fritz card pci v 2
Hi
ich hab meine Fritz Card PCI v2 nach der Anleitung unter
www.pro-linux.de eingerichtet.
wenn ich mich einwähle kommen folgende Meldungen in /var/log/syslog:
einwahl:
Nov 26 16:30:06 pe pppd[314]: Plugin capiplugin.so loaded.
Nov 26 16:30:06 pe pppd[314]: capiplugin: $Revision: 1.22 $
Nov 26 16:30:06 pe pppd[314]: capiconn: 1.5
Nov 26 16:30:07 pe kernel: kcapi: appl 1 up
Nov 26 16:30:07 pe pppd[316]: pppd 2.4.1 started by root, uid 0
Nov 26 16:30:07 pe pppd[316]: capiplugin: phase serialconn.
Nov 26 16:30:07 pe pppd[316]: capiplugin: contr=1
Nov 26 16:30:07 pe pppd[316]: controller 1: listen_change_state 0 -> 1
Nov 26 16:30:07 pe pppd[316]: contr 1: listenconf Info=0x0000 (No
additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
Nov 26 16:30:07 pe pppd[316]: controller 1: listen_change_state 1 -> 0
Nov 26 16:30:07 pe pppd[316]: plci_change_state:0x0 0 -> 1 event=1
Nov 26 16:30:07 pe pppd[316]: capiplugin: dialing 019102345 (hdlc)
Nov 26 16:30:07 pe pppd[316]: plci_change_state:0x101 1 -> 2 event=3
Nov 26 16:30:11 pe pppd[316]: plci_change_state:0x101 2 -> 3 event=6
Nov 26 16:30:11 pe kernel: kcapi: appl 1 ncci 0x10101 up
Nov 26 16:30:11 pe pppd[316]: ncci_change_state:0x101 0 -> 1 event=1
Nov 26 16:30:11 pe pppd[316]: ncci_change_state:0x10101 1 -> 3 event=3
Nov 26 16:30:11 pe pppd[316]: ncci_change_state:0x10101 3 -> 4 event=7
Nov 26 16:30:11 pe pppd[316]: ncci 0x10101 up
Nov 26 16:30:11 pe pppd[316]: capiplugin: connected: "" -> "019102345"
outgoing (pcli=0x101/ncci=0x10101)
Nov 26 16:30:11 pe pppd[316]: capiplugin: using /dev/capi/0: "" ->
"019102345" outgoing (pcli=0x101/ncci=0x10101)
Nov 26 16:30:12 pe pppd[316]: using channel 2
Nov 26 16:30:12 pe pppd[316]: Using interface ppp0
Nov 26 16:30:12 pe pppd[316]: Connect: ppp0 <--> /dev/capi/0
Nov 26 16:30:12 pe pppd[316]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0xb8e21bce> <pcomp> <accomp>]
Nov 26 16:30:12 pe pppd[316]: capiplugin: phase establish (was
serialconn).
Nov 26 16:30:12 pe pppd[316]: rcvd [LCP ConfReq id=0x1 <mru 1524> <auth
pap> <mrru 1524> <endpoint [local:73.74.61.63.6b.69.6e.67]>]
Nov 26 16:30:12 pe pppd[316]: sent [LCP ConfRej id=0x1 <mrru 1524>]
Nov 26 16:30:12 pe pppd[316]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0>
<magic 0xb8e21bce> <pcomp> <accomp>]
Nov 26 16:30:12 pe pppd[316]: rcvd [LCP ConfReq id=0x2 <mru 1524> <auth
pap> <endpoint [local:73.74.61.63.6b.69.6e.67]>]
Nov 26 16:30:12 pe pppd[316]: sent [LCP ConfAck id=0x2 <mru 1524> <auth
pap> <endpoint [local:73.74.61.63.6b.69.6e.67]>]
Nov 26 16:30:12 pe pppd[316]: sent [LCP EchoReq id=0x0 magic=0xb8e21bce]
Nov 26 16:30:12 pe pppd[316]: capiplugin: phase authenticate (was
establish).
Nov 26 16:30:12 pe pppd[316]: sent [PAP AuthReq id=0x1
user="1und1/1410-854@online.de" password=<hidden>]
Nov 26 16:30:12 pe pppd[316]: rcvd [LCP EchoRep id=0x0 magic=0x0]
Nov 26 16:30:12 pe pppd[316]: rcvd [PAP AuthAck id=0x1 "Authorization -
Success"]
Nov 26 16:30:12 pe pppd[316]: Remote message: Authorization - Success
Nov 26 16:30:12 pe pppd[316]: capiplugin: phase network (was
authenticate).
Nov 26 16:30:12 pe pppd[316]: sent [IPCP ConfReq id=0x1 <addr
192.168.10.4> <compress VJ 0f 01>]
Nov 26 16:30:12 pe pppd[316]: sent [CCP ConfReq id=0x1 <deflate 15>
<deflate(old#) 15> <bsd v1 15>]
Nov 26 16:30:12 pe pppd[316]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f
01> <addr 193.158.144.161>]
Nov 26 16:30:12 pe pppd[316]: sent [IPCP ConfAck id=0x1 <compress VJ 0f
01> <addr 193.158.144.161>]
Nov 26 16:30:12 pe pppd[316]: rcvd [CCP ConfReq id=0x1 < 11 05 00 01
04>]
Nov 26 16:30:12 pe pppd[316]: sent [CCP ConfRej id=0x1 < 11 05 00 01
04>]
Nov 26 16:30:12 pe pppd[316]: rcvd [IPCP ConfNak id=0x1 <addr
62.155.230.161>]
Nov 26 16:30:12 pe pppd[316]: sent [IPCP ConfReq id=0x2 <addr
62.155.230.161> <compress VJ 0f 01>]
Nov 26 16:30:12 pe pppd[316]: rcvd [CCP ConfRej id=0x1 <deflate 15>
<deflate(old#) 15> <bsd v1 15>]
Nov 26 16:30:12 pe pppd[316]: sent [CCP ConfReq id=0x2]
Nov 26 16:30:12 pe pppd[316]: rcvd [CCP ConfReq id=0x2 < 11 06 00 01 01
03>]
Nov 26 16:30:12 pe pppd[316]: sent [CCP ConfRej id=0x2 < 11 06 00 01 01
03>]
Nov 26 16:30:12 pe pppd[316]: rcvd [IPCP ConfAck id=0x2 <addr
62.155.230.161> <compress VJ 0f 01>]
Nov 26 16:30:12 pe pppd[316]: not replacing existing default route to
eth0 [192.168.11.7]
Nov 26 16:30:12 pe pppd[316]: Cannot determine ethernet address for
proxy ARP
Nov 26 16:30:12 pe pppd[316]: local IP address 62.155.230.161
Nov 26 16:30:12 pe pppd[316]: remote IP address 193.158.144.161
Nov 26 16:30:12 pe pppd[316]: capiplugin: phase running (was network).
Nov 26 16:30:12 pe pppd[316]: Script /etc/ppp/ip-up started (pid 317)
Nov 26 16:30:12 pe pppd[316]: rcvd [CCP ConfRej id=0x2]
Nov 26 16:30:12 pe pppd[316]: Script /etc/ppp/ip-up finished (pid 317),
status = 0x1
Nov 26 16:30:42 pe pppd[316]: sent [LCP EchoReq id=0x1 magic=0xb8e21bce]
Nov 26 16:30:42 pe pppd[316]: rcvd [LCP EchoRep id=0x1 magic=0x0]
ab hier hab ich den Stecker gezogen ;-)
Nov 26 16:31:03 pe pppd[316]: ncci_change_state:0x10101 4 -> 7 event=10
Nov 26 16:31:03 pe pppd[316]: ncci_change_state:0x10101 7 -> 0 event=13
Nov 26 16:31:03 pe kernel: kcapi: appl 1 ncci 0x10101 down
Nov 26 16:31:03 pe pppd[316]: Hangup (SIGHUP)
Nov 26 16:31:03 pe pppd[316]: plci_change_state:0x101 3 -> 7 event=8
Nov 26 16:31:03 pe pppd[316]: DISCONNECT_IND reason 0x3301 (Protocol
error layer 1 (broken line or B-channel removed by signalling
protocol)) for plci 0x101
Nov 26 16:31:03 pe pppd[316]: plci_change_state:0x101 7 -> 8 event=9
Nov 26 16:31:03 pe pppd[316]: plci_change_state:0x101 8 -> 0 event=11
Nov 26 16:31:03 pe pppd[316]: capiplugin: disconnect(remote): "" ->
"019102345" outgoing (pcli=0x101/ncci=0x10101) 0x3301 (0x3301) -
Protocol error layer 1 (broken line or B-channel removed by signalling
protocol)
Nov 26 16:31:03 pe pppd[316]: Modem hangup
Nov 26 16:31:03 pe pppd[316]: capiplugin: phase network (was running).
Nov 26 16:31:03 pe pppd[316]: Script /etc/ppp/ip-down started (pid 328)
Nov 26 16:31:03 pe pppd[316]: capiplugin: phase terminate (was network).
Nov 26 16:31:03 pe pppd[316]: capiplugin: phase dead (was terminate).
Nov 26 16:31:03 pe pppd[316]: controller 1: listen_change_state 0 -> 1
Nov 26 16:31:03 pe pppd[316]: contr 1: listenconf Info=0x0000 (No
additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
Nov 26 16:31:03 pe pppd[316]: controller 1: listen_change_state 1 -> 0
Nov 26 16:31:03 pe pppd[316]: Connection terminated.
Nov 26 16:31:03 pe pppd[316]: Connect time 0.9 minutes.
Nov 26 16:31:03 pe pppd[316]: Sent 86 bytes, received 80 bytes.
Nov 26 16:31:03 pe pppd[316]: capiplugin: phase disconnect (was dead).
Nov 26 16:31:03 pe pppd[316]: Waiting for 1 child processes...
Nov 26 16:31:03 pe pppd[316]: script /etc/ppp/ip-down, pid 328
Nov 26 16:31:03 pe pppd[316]: Script /etc/ppp/ip-down finished (pid
328), status = 0x0
Nov 26 16:31:03 pe pppd[316]: controller 1: listen_change_state 0 -> 1
Nov 26 16:31:03 pe pppd[316]: contr 1: listenconf Info=0x0000 (No
additional information) infomask=0x144 cipmask=0x0 capimask2=0x0
Nov 26 16:31:03 pe pppd[316]: controller 1: listen_change_state 1 -> 0
Nov 26 16:31:03 pe pppd[316]: capiplugin: exit
Nov 26 16:31:03 pe pppd[316]: Exit.
Nov 26 16:31:03 pe kernel: kcapi: appl 1 down
nun meine Frage: war ich online? denn ich erkenne darin keinen Hinweis,
dass ich online bin! ping zu einer IP brachte keine Antwort, obwohl
ifconfig folgendes sagte:
eth0 Link encap:Ethernet HWaddr 00:50:FC:61:5A:21
inet addr:192.168.11.4 Bcast:192.168.11.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2251 errors:0 dropped:0 overruns:0 frame:0
TX packets:2346 errors:0 dropped:0 overruns:13 carrier:0
collisions:0 txqueuelen:100
RX bytes:190843 (186.3 KiB) TX bytes:1844225 (1.7 MiB)
Interrupt:10 Base address:0xce00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3528 (3.4 KiB) TX bytes:3528 (3.4 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:62.155.230.161 P-t-P:193.158.144.161
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1524 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:80 (80.0 b) TX bytes:86 (86.0 b)
Gruß Micha Mutschler
Reply to: