XFree86 4.2.1 stirbt mit Signal 11
Hallo,
nach dem Upgrade von woody auf sarge startet hier der X-Server nicht mehr.
Nach
dem Aufruf von 'startx' flackert der Bildschirm nur kurz und ich bin wieder
auf der Konsole.
Ich benutze eine Matrox G400MAX, Kernel 2.4.19, XFree86 4.2.1-3 aus sarge.
Im Logfile steht hier folgendes:
------schnipp----
[..]
(==) MGA(0): Write-combining range (0xe2000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 360 MHz
(II) MGA(0): Compaq 171FS: Using hsync range of 30.00-70.00 kHz
(II) MGA(0): Compaq 171FS: Using vrefresh range of 50.00-160.00 Hz
(II) MGA(0): Clock range: 12.00 to 360.00 MHz
(II) MGA(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) MGA(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(==) MGA(0): Write-combining range (0xe2000000,0x2000000)
Fatal server error:
Caught signal 11. Server aborting
-----schnapp-----
In der XF86Config sieht der Abschnitt zum Grafiktreiber so aus:
-----schnipp-----
Section "Device"
Identifier "Matrox G400MAX"
Driver "mga"
EndSection
Section "Monitor"
Identifier "Compaq 171FS"
HorizSync 30-70
VertRefresh 50-160
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Matrox G400MAX"
Monitor "Compaq 171FS"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
EndSection
-----schnapp-----
Das ist von dpkg-reconfigure im "simple"-Modus erzeugt worden, aber auch die
Konfiguration, die ich bisher mit den 4.1.x-Versionen problemlos benutzt
habe, führt zu
dem selben Ergebnis. Änderungen der Refreshraten und Farbtiefe helfen auch
nicht
weiter, eine Google-Suche bringt mich auch nur zu der Vermutung, dass das
Problem wohl am Grafiktreiber liegt.
Was kann ich ausprobieren, um mein XFree86 doch noch zum Laufen zu kriegen?
Michael
--
+++ GMX - Mail, Messaging & more http://www.gmx.net +++
NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
Reply to: