[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Probleme mit scp und sftp



On Sat, Aug 17, 2002 at 05:20:59PM +0200, Jörg Schütter wrote:
> Hallo Marco,
> 
> was liefert
> scp -v source destination
> bzw
> sftp -v localhost

Hallo Jörg,

marco@lurkabove:~$ sftp -v localhost
Connecting to localhost...
OpenSSH_3.4p1 Debian 1:3.4p1-1, SSH protocols 1.5/2.0, OpenSSL
0x0090603f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be
trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to localhost [127.0.0.1] port 22.
debug1: Connection established.
debug1: identity file /home/marco/.ssh/id_rsa type -1
debug1: identity file /home/marco/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version
OpenSSH_3.4p1 Debian 1:3.4p1-1
debug1: match: OpenSSH_3.4p1 Debian 1:3.4p1-1 pat OpenSSH*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.4p1 Debian 1:3.4p1-1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 132/256
debug1: bits set: 1602/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'localhost' is known and matches the RSA host key.
debug1: Found key in /home/marco/.ssh/known_hosts:2
debug1: bits set: 1575/3191
debug1: ssh_rsa_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue:
publickey,password,keyboard-interactive
debug1: next auth method to try is publickey
debug1: try privkey: /home/marco/.ssh/id_rsa
debug1: try privkey: /home/marco/.ssh/id_dsa
debug1: next auth method to try is keyboard-interactive
debug1: authentications that can continue:
publickey,password,keyboard-interactive
debug1: next auth method to try is password
marco@localhost's password:

  Nach Eingabe des Passworts:

debug1: ssh-userauth2 successful: method password
debug1: fd 4 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: Sending subsystem: sftp
debug1: channel request 0: subsystem
debug1: channel 0: open confirm rwindow 0 rmax 32768
Received message too long 170732845
marco@lurkabove:~$ debug1: channel 0: read<=0 rfd 4 len -1
debug1: channel 0: read failed
debug1: channel 0: close_read
debug1: channel 0: input open -> drain
debug1: channel 0: ibuf empty
debug1: channel 0: send eof
debug1: channel 0: input drain -> closed
debug1: channel 0: write failed
debug1: channel 0: close_write
debug1: channel 0: output open -> closed
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: channel 0: rcvd eof
debug1: channel 0: rcvd close
debug1: channel 0: almost dead
debug1: channel 0: gc: notify user
debug1: channel 0: gc: user detached
debug1: channel 0: send close
debug1: channel 0: is dead
debug1: channel 0: garbage collecting
debug1: channel_free: channel 0: client-session, nchannels 1
debug1: fd 0 clearing O_NONBLOCK
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.5 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 0



und für scp:

marco@lurkabove:~$ scp -v ./test marco@localhost:/tmp
Executing: program /usr/bin/ssh host localhost, user marco, command scp
-v -t /tmp
OpenSSH_3.4p1 Debian 1:3.4p1-1, SSH protocols 1.5/2.0, OpenSSL
0x0090603f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be
trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to localhost [127.0.0.1] port 22.
debug1: Connection established.
debug1: identity file /home/marco/.ssh/identity type -1
debug1: identity file /home/marco/.ssh/id_rsa type -1
debug1: identity file /home/marco/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version
OpenSSH_3.4p1 Debian 1:3.4p1-1
debug1: match: OpenSSH_3.4p1 Debian 1:3.4p1-1 pat OpenSSH*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.4p1 Debian 1:3.4p1-1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 118/256
debug1: bits set: 1568/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'localhost' is known and matches the RSA host key.
debug1: Found key in /home/marco/.ssh/known_hosts:2
debug1: bits set: 1620/3191
debug1: ssh_rsa_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue:
publickey,password,keyboard-interactive
debug1: next auth method to try is publickey
debug1: try privkey: /home/marco/.ssh/identity
debug1: try privkey: /home/marco/.ssh/id_rsa
debug1: try privkey: /home/marco/.ssh/id_dsa
debug1: next auth method to try is keyboard-interactive
debug1: authentications that can continue:
publickey,password,keyboard-interactive
debug1: next auth method to try is password
marco@localhost's password:

  Und hier nach Eingabe des Passworts:

debug1: ssh-userauth2 successful: method password
debug1: fd 4 setting O_NONBLOCK
debug1: fd 5 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: Sending command: scp -v -t /tmp
debug1: channel request 0: exec
debug1: channel 0: open confirm rwindow 0 rmax 32768

-------------
marco@lurkabove:~$ debug1: channel 0: read<=0 rfd 4 len 0
debug1: channel 0: read failed
debug1: channel 0: close_read
debug1: channel 0: input open -> drain
debug1: channel 0: ibuf empty
debug1: channel 0: send eof
debug1: channel 0: input drain -> closed
debug1: channel 0: write failed
debug1: channel 0: close_write
debug1: channel 0: output open -> closed
bash: fortune: command not found
KDGKBLED: Das Argument ist ungültig
Error reading current flags setting. Maybe you are not on the console?
stty: Standardeingabe: Das Argument ist ungültig
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: channel 0: rcvd eof
debug1: channel 0: rcvd close
debug1: channel 0: almost dead
debug1: channel 0: gc: notify user
debug1: channel 0: gc: user detached
debug1: channel 0: send close
debug1: channel 0: is dead
debug1: channel 0: garbage collecting
debug1: channel_free: channel 0: client-session, nchannels 1
debug1: fd 0 clearing O_NONBLOCK
debug1: fd 1 clearing O_NONBLOCK
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.6 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 0



Die drei Zeilen

bash: fortune: command not found
KDGKBLED: Das Argument ist ungültig
Error reading current flags setting. Maybe you are not on the console?

erscheinen auch in jedem X-Term. Die hängen mit diesem Problem nicht
zusammen.

Allerdings lese ich aus diesen Fehlermeldungen noch nichts heraus.
Du vielleicht?

Ciao
Marco
--
Feel disillusioned?  I've got some great new illusions ...

--
Marco Herrn             herrn@gmx.net
(GnuPG/PGP-signed and crypted mail preferred)
Key ID: 0x94620736



Reply to: