Re: PPP
Guten Abend,
ich hatte das Problem auch und habs durch ein update die für ppp zuständig
sind gelöst.
MfG
Andreas
----- Original Message -----
From: "Wolfgang Pausch" <wol@kulmbach.net>
To: <debian-user-german@lists.debian.org>
Cc: <debian-user-german@lists.debian.org>
Sent: Friday, February 22, 2002 5:30 PM
Subject: PPP
> Hallo,
>
> ich habe bisher den Kernel 2.2.18 benützt und habe mir jetzt den Kernel
> 2.4.17
> compiliert.
> Allerdings habe ich jetzt folgendes Problem:
> Wenn ich mit Kernel 2.2.18 boote, funktioniert ppp problemlos.
> Wenn ich mit Kernel 2.4.17 boote und pon starte, wählt das Modem zwar,
> aber nach
> einigen Piepstönen wird die Verbindung wieder unterbrochen.
>
> In der syslog steht dann folgendes:
>
> Feb 22 15:23:59 schneebaum pppd[383]: pppd 2.3.11 started by root, uid 0
> Feb 22 15:24:00 schneebaum chat[384]: abort on (BUSY)
> Feb 22 15:24:00 schneebaum chat[384]: abort on (NO CARRIER)
> Feb 22 15:24:00 schneebaum chat[384]: abort on (VOICE)
> Feb 22 15:24:00 schneebaum chat[384]: abort on (NO DIALTONE)
> Feb 22 15:24:00 schneebaum chat[384]: abort on (NO DIAL TONE)
> Feb 22 15:24:00 schneebaum chat[384]: abort on (NO ANSWER)
> Feb 22 15:24:00 schneebaum chat[384]: send (ATX3^M)
> Feb 22 15:24:00 schneebaum chat[384]: expect (OK)
> Feb 22 15:24:00 schneebaum chat[384]: ATX3^M^M
> Feb 22 15:24:00 schneebaum chat[384]: OK
> Feb 22 15:24:00 schneebaum chat[384]: -- got it
> Feb 22 15:24:00 schneebaum chat[384]: send (ATDT0019102244^M)
> Feb 22 15:24:00 schneebaum chat[384]: expect (CONNECT)
> Feb 22 15:24:00 schneebaum chat[384]: ^M
> Feb 22 15:24:25 schneebaum modprobe: modprobe: Can't locate module
> char-major-6
> Feb 22 15:24:34 schneebaum chat[384]: ATDT0019102244^M^M
> Feb 22 15:24:34 schneebaum chat[384]: CONNECT
> Feb 22 15:24:34 schneebaum chat[384]: -- got it
> Feb 22 15:24:34 schneebaum chat[384]: send (\d)
> Feb 22 15:24:35 schneebaum pppd[383]: Serial connection established.
> Feb 22 15:24:35 schneebaum pppd[383]: Couldn't attach tty to PPP unit 0:
> Invalid
> argument
> Feb 22 15:24:35 schneebaum pppd[383]: Hangup (SIGHUP)
> Feb 22 15:24:35 schneebaum pppd[383]: Exit.
>
> Es sind außerdem noch mehr solche Zeilen der Bauart "modprobe: Can't
> locate module
> XXX" drin, egal mit welchem Kernel.
>
> Zum Vergleich, was mit dem alten Kernel drin steht:
>
> Feb 22 17:02:24 schneebaum pppd[350]: pppd 2.4.1 started by root, uid 0
> Feb 22 17:02:25 schneebaum chat[351]: abort on (BUSY)
> Feb 22 17:02:25 schneebaum chat[351]: abort on (NO CARRIER)
> Feb 22 17:02:25 schneebaum chat[351]: abort on (VOICE)
> Feb 22 17:02:25 schneebaum chat[351]: abort on (NO DIALTONE)
> Feb 22 17:02:25 schneebaum chat[351]: abort on (NO DIAL TONE)
> Feb 22 17:02:25 schneebaum chat[351]: abort on (NO ANSWER)
> Feb 22 17:02:25 schneebaum chat[351]: send (ATX3^M)
> Feb 22 17:02:25 schneebaum chat[351]: expect (OK)
> Feb 22 17:02:25 schneebaum chat[351]: ATX3^M^M
> Feb 22 17:02:25 schneebaum chat[351]: OK
> Feb 22 17:02:25 schneebaum chat[351]: -- got it
> Feb 22 17:02:25 schneebaum chat[351]: send (ATDT0019102244^M)
> Feb 22 17:02:26 schneebaum chat[351]: expect (CONNECT)
> Feb 22 17:02:26 schneebaum chat[351]: ^M
> Feb 22 17:03:00 schneebaum chat[351]: ATDT0019102244^M^M
> Feb 22 17:03:00 schneebaum chat[351]: CONNECT
> Feb 22 17:03:00 schneebaum chat[351]: -- got it
> Feb 22 17:03:00 schneebaum chat[351]: send (\d)
> Feb 22 17:03:01 schneebaum pppd[350]: Serial connection established.
> Feb 22 17:03:01 schneebaum pppd[350]: Using interface ppp0
> Feb 22 17:03:01 schneebaum pppd[350]: Connect: ppp0 <--> /dev/ttyS0
> Feb 22 17:03:02 schneebaum pppd[350]: sent [LCP ConfReq id=0x1 <asyncmap
> 0x0> <magic
> 0x45fa5d47> <pcomp> <accomp>]
> Feb 22 17:03:02 schneebaum pppd[350]: rcvd [LCP ConfReq id=0x1 <mru
> 1524> <asyncmap
> 0x0> <auth pap> <pcomp> <accomp> <mrru 1524> <endpoint
> [local:73.74.61.63.6b.69.6e.67]>]
> Feb 22 17:03:02 schneebaum pppd[350]: sent [LCP ConfRej id=0x1 <mrru
> 1524>]
>
> (...)
>
> Meine Frage ist natürlich: An was liegt das? Habe ich beim Konfigurieren
> der
> Einstellungen fürs Kernel-Compilieren einen Fehler gemacht?
> Angehängt habe ich die .config des neuen Kernels.
>
> Wolfgang Pausch
----------------------------------------------------------------------------
----
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_ISA=y
> # CONFIG_SBUS is not set
> CONFIG_UID16=y
>
> #
> # Code maturity level options
> #
> # CONFIG_EXPERIMENTAL is not set
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
>
> #
> # Processor type and features
> #
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUM4 is not set
> CONFIG_MK6=y
> # CONFIG_MK7 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_L1_CACHE_SHIFT=5
> CONFIG_X86_ALIGNMENT_16=y
> CONFIG_X86_TSC=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> # CONFIG_MTRR is not set
> CONFIG_SMP=y
> # CONFIG_MULTIQUAD is not set
> CONFIG_HAVE_DEC_LOCK=y
>
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_NAMES=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> CONFIG_HOTPLUG=y
>
> #
> # PCMCIA/CardBus support
> #
> # CONFIG_PCMCIA is not set
>
> #
> # PCI Hotplug Support
> #
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_SYSCTL=y
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> CONFIG_PM=y
> # CONFIG_APM is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_PC_CML1=y
> CONFIG_PARPORT_SERIAL=y
> # CONFIG_PARPORT_AMIGA is not set
> # CONFIG_PARPORT_MFC3 is not set
> # CONFIG_PARPORT_ATARI is not set
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_SUNBPP is not set
> # CONFIG_PARPORT_OTHER is not set
> # CONFIG_PARPORT_1284 is not set
>
> #
> # Plug and Play configuration
> #
> CONFIG_PNP=m
> CONFIG_ISAPNP=m
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_DEV_XD is not set
> CONFIG_PARIDE=m
> CONFIG_PARIDE_PARPORT=y
>
> #
> # Parallel IDE high-level drivers
> #
> CONFIG_PARIDE_PD=m
> CONFIG_PARIDE_PCD=m
> CONFIG_PARIDE_PF=m
> # CONFIG_PARIDE_PT is not set
> CONFIG_PARIDE_PG=m
>
> #
> # Parallel IDE protocol modules
> #
> # CONFIG_PARIDE_ATEN is not set
> # CONFIG_PARIDE_BPCK is not set
> # CONFIG_PARIDE_BPCK6 is not set
> # CONFIG_PARIDE_COMM is not set
> # CONFIG_PARIDE_DSTR is not set
> # CONFIG_PARIDE_FIT2 is not set
> # CONFIG_PARIDE_FIT3 is not set
> # CONFIG_PARIDE_EPAT is not set
> # CONFIG_PARIDE_EPIA is not set
> # CONFIG_PARIDE_FRIQ is not set
> # CONFIG_PARIDE_FRPW is not set
> # CONFIG_PARIDE_KBIC is not set
> # CONFIG_PARIDE_KTTI is not set
> # CONFIG_PARIDE_ON20 is not set
> # CONFIG_PARIDE_ON26 is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_LOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_NETLINK_DEV=y
> # CONFIG_NETFILTER is not set
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
>
> #
> #
> #
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # ATA/IDE/MFM/RLL support
> #
> CONFIG_IDE=y
>
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
> # CONFIG_BLK_DEV_COMMERIAL is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> CONFIG_BLK_DEV_IDEFLOPPY=y
> # CONFIG_BLK_DEV_IDESCSI is not set
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_BLK_DEV_CMD640=y
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> CONFIG_BLK_DEV_RZ1000=y
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> CONFIG_BLK_DEV_PIIX=y
> CONFIG_PIIX_TUNING=y
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_CHIPSETS is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_IDEDMA_IVB is not set
> # CONFIG_DMA_NONPCI is not set
> CONFIG_BLK_DEV_IDE_MODES=y
>
> #
> # SCSI support
> #
> CONFIG_SCSI=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> CONFIG_SD_EXTRA_DEVS=40
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> # CONFIG_CHR_DEV_SG is not set
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_DEBUG_QUEUES=y
> # CONFIG_SCSI_MULTI_LUN is not set
> CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_LOGGING is not set
>
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AHA1740 is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_DMA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> CONFIG_SCSI_IZIP_EPP16=y
> # CONFIG_SCSI_IZIP_SLOW_CTR is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_NCR53C7xx is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_NCR53C8XX is not set
> # CONFIG_SCSI_SYM53C8XX is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_SEAGATE is not set
> # CONFIG_SCSI_SIM710 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_ULTRASTOR is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> # CONFIG_FUSION_BOOT is not set
> # CONFIG_FUSION_ISENSE is not set
> # CONFIG_FUSION_CTL is not set
> # CONFIG_FUSION_LAN is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_NET_SB1000 is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_APRICOT is not set
> # CONFIG_CS89x0 is not set
> # CONFIG_TULIP is not set
> # CONFIG_DE4X5 is not set
> # CONFIG_DGRS is not set
> # CONFIG_DM9102 is not set
> CONFIG_EEPRO100=y
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_NET_POCKET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_FDDI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=y
> CONFIG_PPP_ASYNC=y
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=y
> # CONFIG_PPP_BSDCOMP is not set
> # CONFIG_PPPOATM is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Input core support
> #
> # CONFIG_INPUT is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_SERIAL=y
> # CONFIG_SERIAL_CONSOLE is not set
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> # CONFIG_PRINTER is not set
> # CONFIG_PPDEV is not set
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> CONFIG_MOUSE=y
> CONFIG_PSMOUSE=y
> # CONFIG_82C710_MOUSE is not set
> # CONFIG_PC110_PAD is not set
>
> #
> # Joysticks
> #
> # CONFIG_INPUT_GAMEPORT is not set
>
> #
> # Input core support is needed for gameports
> #
>
> #
> # Input core support is needed for joysticks
> #
> # CONFIG_QIC02_TAPE is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_INTEL_RNG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> CONFIG_AGP_INTEL=y
> CONFIG_AGP_I810=y
> CONFIG_AGP_VIA=y
> CONFIG_AGP_AMD=y
> CONFIG_AGP_SIS=y
> CONFIG_AGP_ALI=y
> # CONFIG_AGP_SWORKS is not set
> CONFIG_DRM=y
> CONFIG_DRM_TDFX=y
> # CONFIG_DRM_GAMMA is not set
> # CONFIG_DRM_R128 is not set
> CONFIG_DRM_RADEON=y
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_MWAVE is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_EXT3_FS is not set
> # CONFIG_JBD is not set
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> # CONFIG_UMSDOS_FS is not set
> CONFIG_VFAT_FS=y
> # CONFIG_CRAMFS is not set
> CONFIG_TMPFS=y
> # CONFIG_RAMFS is not set
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> # CONFIG_MINIX_FS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVPTS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_SYSV_FS is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> CONFIG_NFS_FS=m
> # CONFIG_NFS_V3 is not set
> # CONFIG_NFSD is not set
> CONFIG_SUNRPC=m
> CONFIG_LOCKD=m
> # CONFIG_SMB_FS is not set
> # CONFIG_NCP_FS is not set
> CONFIG_ZISOFS_FS=y
> CONFIG_ZLIB_FS_INFLATE=y
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> # CONFIG_SMB_NLS is not set
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> # CONFIG_NLS_CODEPAGE_437 is not set
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> CONFIG_NLS_CODEPAGE_852=m
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ISO8859_1 is not set
> CONFIG_NLS_ISO8859_2=m
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
>
> #
> # Console drivers
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_VIDEO_SELECT is not set
>
> #
> # Sound
> #
> CONFIG_SOUND=y
> # CONFIG_SOUND_BT878 is not set
> # CONFIG_SOUND_CMPCI is not set
> # CONFIG_SOUND_EMU10K1 is not set
> # CONFIG_SOUND_FUSION is not set
> # CONFIG_SOUND_CS4281 is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_ICH is not set
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_MSNDCLAS is not set
> # CONFIG_SOUND_MSNDPIN is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> # CONFIG_SOUND_OSS is not set
>
> #
> # USB support
> #
> CONFIG_USB=m
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> # CONFIG_USB_DEVICEFS is not set
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_LONG_TIMEOUT is not set
>
> #
> # USB Controllers
> #
> # CONFIG_USB_UHCI is not set
> CONFIG_USB_UHCI_ALT=m
> # CONFIG_USB_OHCI is not set
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
>
> #
> # USB Human Interface Devices (HID)
> #
>
> #
> # Input core support is needed for USB HID
> #
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_DC2XX is not set
> # CONFIG_USB_SCANNER is not set
> # CONFIG_USB_MICROTEK is not set
>
> #
> # USB Multimedia devices
> #
>
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
>
> #
> # USB Network adaptors
> #
>
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
>
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
>
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
>
>
Reply to: