RE: Neu-Installation auf SCSI bootet nur von Diskette
On Tue, 12 Feb 2002 15:35:31 +0100, Karin Gerbrich wrote:
>Hi Johannes
>
>
>>Wenn Du von der Diskette gebootet hast, ruf doch bitte mal lilo auf.
>>
>Hab ich schon gemacht
>
>>Wenn's danach immer noch nicht bootet, poste doch mal die
>>Ausgabe folgender Befehle:
>>
>Funktioniert immer noch nicht :o(
>
>>- cat /etc/lilo.conf
>>
>Hab ich grad vorhin gepostet, hier nochmals:
>lba32
>boot=/dev/sda
>root=/dev/sda2
>install=/boot/boot.b
>map=/boot/map
>delay=20
>vga=normal
>default=Linux
> label=Linux
> read-only
>image=/vmlinuz.old
> label=LinuxOLD
> read-only
> optional
Tja , ich hatte schon mal ähnliche Probleme.
Schreibe doch Lilo auf boot=/dev/hda
und root kann ja trotzdem auf root=/dev/sda2 stehen.
Mal selbst wenn das Bios booten von SCSI anbietet, und man hat ein
Mischsystem aus IDE-Festplatten und SCSI-Festplatten dann schert sich
Lilo trotzdem nicht darum. Es sei denn man überedet ihn dazu.
disk=/dev/sda
bios=0x80
disk=/dev/hda
bios=0x81
It's time to close windows !!!
with best regards from Dortmund
Matthias Popp
49-163-4289 455
Reply to: