J'utilise une connexion VPN pour des
accès distant sur des serveurs au
boulot.
J'ai donc configuré une connexion VPN
dans network-manager, mais pour
retrouver internet je dois le
désactiver, et ainsi de suite.
Mes collègues sous windows eux, le
net fonctionne et ont accès au serveur
via le vpn.
la commande route -n avant d'activer
le vpn
Destination Passerelle
Genmask Indic Metric Ref Use
Iface
0.0.0.0 192.168.157.1 0.0.0.0
UG 100 0 0 eth0
169.254.0.0 0.0.0.0
255.255.0.0 U 1000 0 0
eth0
192.168.157.0 0.0.0.0
255.255.255.0 U 100 0 0
eth0
et après l'avoir activé
Table de routage IP du noyau
Destination Passerelle
Genmask Indic Metric Ref
Use Iface
0.0.0.0 0.0.0.0
0.0.0.0 U 50 0
0 ppp0
0.0.0.0 192.168.157.1
0.0.0.0 UG 100 0
0 eth0
169.254.0.0 0.0.0.0
255.255.0.0 U 1000 0
0 eth0
172.16.0.0 10.0.194.22
255.255.0.0 UG 50 0
0 ppp0
172.17.0.0 10.0.194.22
255.255.0.0 UG 50 0
0 ppp0
172.18.0.0 10.0.194.22
255.255.0.0 UG 50 0
0 ppp0
172.19.0.0 10.0.194.22
255.255.0.0 UG 50 0
0 ppp0
172.22.234.0 10.0.194.22
255.255.254.0 UG 50 0
0 ppp0
192.0.2.1 0.0.0.0
255.255.255.255 UH 50 0
0 ppp0
192.168.157.0 0.0.0.0
255.255.255.0 U 100 0
0 eth0
192.168.157.1 0.0.0.0
255.255.255.255 UH 100 0
0 eth0
195.83.235.250 192.168.157.1
255.255.255.255 UGH 100 0
0 eth0
Comment puis-je faire ? si sous
linux c'est possible
--