Bonjour, Je viens vers vous car comme certains je me lance dans le monde du SSD et comme tous j'ai quelques difficultés... J'ai quelques interrogations qui restent sans réponses, mais j'y reviendrais par la suite. Tout d'abord, le SMART. Je sais qu'il y a moins d'indicateurs sur les SSD, que certains sont même très mal renseignés (comme pour les disques durs au début) mais voila, j'ai des SSD, je surveille le SMART et j'aimerai bien avoir d'autres avis sur la santé de ces "disques". Je joins quelques fichiers contenant le SMART: - Les "sd[bc].ref.smart" sont les fichiers d'origine, juste après le branchement des disques - Les "sd[bc].test.smart" sont ceux recueillit après deux "badblocks" sur les "disques" (pas de partitions encore, directement le device) - Les "sd[bc].test2.smart" sont ceux recueillit après deux autres "badblocks" sur les "disques" et tests "court" et "long" de SMART J'ai trouver sur le net une référence de certaines des valeurs mais cette source n'indiquait pas les valeurs normales et/ou unités (http://www.ocztechnologyforum.com/staff/ryderocz/misc/Sandforce.jpg par exemple). N'hésitez pas si vous pouvez éclairer ma lanterne. Je suis quelques peut intrigué par la valeur "Power_On_Hours" (9), qui diminue avec le temps :-$, peut-être le MTBF (temps moyen entre deux pannes), mais à ce moment la, je crois que je devrais m'inquiéter. Il y a aussi les valeurs des "Raw_Read_Error_Rate" (1), "Hardware_ECC_Recovered" (195), "Soft_Read_Error_Rate" (201), "Soft_ECC_Correction" (204), qui sont parfaitement identiques et qui augmente avec le temps, sur un disque dur, je le remplacerait immédiatement... Et finalement la valeur du "Temperature_Celsius" (231), qui si l'on en croit le lien donné plus haut signifierait "SSD_Life_Left" et qui si la valeur est exacte, indiquerait que les disques sont en fin de vie... Qu'en pensez-vous ? Mes autres interrogations portent principalement sur le TRIM et le système de fichier ext4. J'ai lu dans une autre conversation qu'il était conseillé de mettre la swap dans un fichier sur une partition formatée en ext4 et montée avec l'option "discard". Ok pour l'ext4 avec l'option "discard" pour "activer" le TRIM, mais la swap, le fichier est créer, quand la machine swap, est remplit, mais en aucun cas supprimer quand la machine "déswap", et donc le TRIM n'est jamais utilisé dessus ? je me trompe ? Du coup aucun interrêt à ce que se soit un fichier sur une partition... Autrement, il me semblait qu'il existait une option sur le système de fichier ext4 pour faire une sorte de "round-robin" des blocs et ainsi allongé la durée de vie des SSD, mais je n'arrive pas a en trouver la moindre trace, aurais-je rêvé ? Quelqu'un à t'il déjà entendu parler d'une telle option, en projet peut-être ? Automatique ? Y'a t'il d'autres options que "relatime", "noatime" et "discard" qui seraient intéressantes pour un SSD ? Pour revenir sur le TRIM, comment indiqué manuellement au SSD que les secteurs sont disponibles ? D'une part car j'ai fais mes "badblocks" dessus et que du coup normalement tout est occupé, mais aussi pour la partition swap, lors d'un arrêt ou démarrage (avant le swapon) histoire de... Autrement, j'envisageais de mettre un ext4 sur une partition qui fait tout le SSD, la remplir avec un fichier, et supprimer se fichier... Merci d'avoir pris le temps de me lire, et d'avance merci, pour toute l'aide que vous apporterez, à moi-même, mais aussi aux autres qui lierons ceci par la suite. Thibaut
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: OCZ-AGILITY3
Serial Number: OCZ-TQ89VYH86KE61BRD
LU WWN Device Id: 5 e83a97 e7462bf01
Firmware Version: 2.13
User Capacity: 60 022 480 896 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Wed Oct 26 22:40:07 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 094 094 050 Pre-fail Always - 147627618
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 40097814675467
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 4
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (Min/Max 127/129)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 147627618
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 147627618
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 147627618
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 97
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 340
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 340
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 301
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: OCZ-AGILITY3
Serial Number: OCZ-I1Q97B03QQKX9EM8
LU WWN Device Id: 5 e83a97 ed367fc4b
Firmware Version: 2.13
User Capacity: 60 022 480 896 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Wed Oct 26 22:40:11 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail Always - 147215985
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 280933810831371
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 4
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (Min/Max 127/129)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 147215985
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 147215985
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 147215985
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 95
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 322
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 322
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 301
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: OCZ-AGILITY3
Serial Number: OCZ-TQ89VYH86KE61BRD
LU WWN Device Id: 5 e83a97 e7462bf01
Firmware Version: 2.13
User Capacity: 60 022 480 896 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Thu Oct 27 00:58:46 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail Always - 147198636
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12850542149647
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 4
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (Min/Max 127/129)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 147198636
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 147198636
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 147198636
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 181
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 579
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 579
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 581
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: OCZ-AGILITY3
Serial Number: OCZ-I1Q97B03QQKX9EM8
LU WWN Device Id: 5 e83a97 ed367fc4b
Firmware Version: 2.13
User Capacity: 60 022 480 896 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Thu Oct 27 00:58:52 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 088 088 050 Pre-fail Always - 146996873
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 134337987084303
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 4
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (Min/Max 127/129)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 146996873
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 146996873
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 146996873
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 181
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 579
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 579
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 580
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: OCZ-AGILITY3
Serial Number: OCZ-TQ89VYH86KE61BRD
LU WWN Device Id: 5 e83a97 e7462bf01
Firmware Version: 2.13
User Capacity: 60 022 480 896 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Thu Oct 27 09:56:02 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 1) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 732) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 090 090 050 Pre-fail Always - 154414606
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6356551598110
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 4
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (Min/Max 127/129)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 154414606
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 154414606
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 154414606
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 360
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 1138
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 1138
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 1198
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: OCZ-AGILITY3
Serial Number: OCZ-I1Q97B03QQKX9EM8
LU WWN Device Id: 5 e83a97 ed367fc4b
Firmware Version: 2.13
User Capacity: 60 022 480 896 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Thu Oct 27 09:56:02 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 1) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 732) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 088 088 050 Pre-fail Always - 154313627
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 14585708937246
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 4
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 128 129 000 Old_age Always - 128 (Min/Max 127/129)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 154313627
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline - 154313627
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 154313627
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always - 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 360
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 1138
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 1138
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 1197
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Attachment:
signature.asc
Description: OpenPGP digital signature