[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Configurer une imprimante laser hp sur lenny

Amandine VITAL a écrit :

Le 26 mai 2009 09:45, Rodolphe <thx_9009@yahoo.fr> a écrit :

Amandine VITAL a écrit :

Décidémment, j'essaie depuis 4 jours, rien à faire. A force, c'est la
confusion et le désespoir. je ne parviens pas à configurer mon
imprimante multifonction.
Même en passant sur ubuntu, j'ai tester, le device net n'est pas
reconnu. hplip, j'ai installé par debian et ubuntu en faisant
aptitude, et quand je fait hp-setup, je dois choisir le device, et je
choisis 1 pour le network. et j'ai l'erreur suivant :
 error: No device selected/specified or that supports this functionality.

si je fais : (à la installation précédente, je n'avais pas d'erreur,
cette fois ci j'en ai) hp-check -r
# cat hp-check.log
Ubuntu

9.10

/usr/bin/lpstat: impossible de se connecter au serveur.

Linux vital 2.6.30-6-server #7-Ubuntu SMP Fri May 22 06:03:46 UTC 2009
i686 GNU/Linux

hp-check[3365]: info: :
hp-check[3365]: info: :---------------
hp-check[3365]: info: :| SYSTEM INFO |
hp-check[3365]: info: :---------------
hp-check[3365]: info: :
hp-check[3365]: info: :[01mBasic system information:[0m
hp-check[3365]: info: :Linux vital 2.6.30-6-server #7-Ubuntu SMP Fri
May 22 06:03:46 UTC 2009 i686 GNU/Linux
hp-check[3365]: info: :
hp-check[3365]: info: :[01mDistribution:[0m
hp-check[3365]: info: :ubuntu 9.10
hp-check[3365]: info: :[01m
HPOJ running?[0m
hp-check[3365]: info: :No, HPOJ is not running (OK).
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking Python version...[0m
hp-check[3365]: info: :OK, version 2.6.2 installed
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking PyQt 4.x version...[0m
error: NOT FOUND OR FAILED TO LOAD!
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for CUPS...[0m
error: Status: (Not available. CUPS may not be installed or not running.)
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dbus/python-dbus...[0m
hp-check[3365]: info: :dbus daemon is running.
hp-check[3365]: info: :python-dbus version: 0.83.0
hp-check[3365]: info: :
hp-check[3365]: info: :
hp-check[3365]: info: :------------------------
hp-check[3365]: info: :| RUNTIME DEPENDENCIES |
hp-check[3365]: info: :------------------------
hp-check[3365]: info: :
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: CUPS - Common Unix
Printing System...[0m
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please
make sure that this dependency is installed before installing or
running HPLIP.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: CUPS DDK - CUPS
driver development kit...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: GhostScript -
PostScript and PDF language interpreter and previewer...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: PIL - Python
Imaging Library (required for commandline scanning with hp-scan)...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: PolicyKit -
Administrative policy framework...[0m
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some
HPLIP functionality may not function properly.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: ppdev - Parallel
port support kernel module....[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: PyQt 4 DBus - DBus
Support for PyQt4...[0m
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please
make sure that this dependency is installed before installing or
running HPLIP.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: Python ctypes - A
foreign function library for Python...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: Python DBus -
Python bindings for DBus...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: Python XML
libraries...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: Python 2.3 or
greater - Required for fax functionality...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: Reportlab - PDF
library for Python...[0m
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some
HPLIP functionality may not function properly.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: SANE - Scanning
library...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: scanimage - Shell
scanning program...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking for dependency: xsane - Graphical
scanner frontend for SANE...[0m
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some
HPLIP functionality may not function properly.
hp-check[3365]: info: :
hp-check[3365]: info: :
hp-check[3365]: info: :----------------------
hp-check[3365]: info: :| HPLIP INSTALLATION |
hp-check[3365]: info: :----------------------
hp-check[3365]: info: :
hp-check[3365]: info: :
hp-check[3365]: info: :[01mCurrently installed HPLIP version...[0m
hp-check[3365]: info: :HPLIP 3.9.4b currently installed in
'/usr/share/hplip'.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mCurrent contents of '/etc/hp/hplip.conf'
file:[0m
hp-check[3365]: info: :# hplip.conf.  Generated from hplip.conf.in by
configure.

[hplip]
version=3.9.4b

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
cups-ppd-install=no
cups-drv-install=yes
internal-tag=3.9.4b.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes

hp-check[3365]: info: :
hp-check[3365]: info: :[01mCurrent contents of
'/var/lib/hp/hplip.state' file:[0m
hp-check[3365]: info: :# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0


hp-check[3365]: info: :
hp-check[3365]: info: :[01mCurrent contents of '~/.hplip/hplip.conf'
file:[0m
hp-check[3365]: info: :[installation]
version = 3.9.4b.10
date_time = 05/26/09 09:13:23


hp-check[3365]: info: :
hp-check[3365]: info: :-------------------------------
hp-check[3365]: info: :| DISCOVERED PARALLEL DEVICES |
hp-check[3365]: info: :-------------------------------
hp-check[3365]: info: :
hp-check[3365]: info: :No devices found.
hp-check[3365]: info: :
hp-check[3365]: info: :--------------------------
hp-check[3365]: info: :| DISCOVERED USB DEVICES |
hp-check[3365]: info: :--------------------------
hp-check[3365]: info: :
hp-check[3365]: info: :No devices found.
hp-check[3365]: info: :
hp-check[3365]: info: :---------------------------------
hp-check[3365]: info: :| INSTALLED CUPS PRINTER QUEUES |
hp-check[3365]: info: :---------------------------------
hp-check[3365]: info: :
hp-check[3365]: info: :
warning: No queues found.
hp-check[3365]: info: :
hp-check[3365]: info: :----------------------
hp-check[3365]: info: :| SANE CONFIGURATION |
hp-check[3365]: info: :----------------------
hp-check[3365]: info: :
hp-check[3365]: info: :[01m'hpaio' in '/etc/sane.d/dll.conf'...[0m
hp-check[3365]: info: :[01m'hpaio' in '/etc/sane.d/dll.d/hplip'...[0m
hp-check[3365]: info: :OK, found. SANE backend 'hpaio' is properly set up.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking output of 'scanimage -L'...[0m
hp-check[3365]: info: :
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

hp-check[3365]: info: :
hp-check[3365]: info: :---------------------
hp-check[3365]: info: :| PYTHON EXTENSIONS |
hp-check[3365]: info: :---------------------
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking 'cupsext' CUPS extension...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking 'pcardext' Photocard extension...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking 'hpmudext' I/O extension...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :[01mChecking 'scanext' SANE scanning
extension...[0m
hp-check[3365]: info: :OK, found.
hp-check[3365]: info: :
hp-check[3365]: info: :
hp-check[3365]: info: :
hp-check[3365]: info: :---------------
hp-check[3365]: info: :| USER GROUPS |
hp-check[3365]: info: :---------------
hp-check[3365]: info: :
hp-check[3365]: info: :amandine adm dialout cdrom plugdev lpadmin
sambashare admin

hp-check[3365]: info: :
hp-check[3365]: info: :-----------
hp-check[3365]: info: :| SUMMARY |
hp-check[3365]: info: :-----------
hp-check[3365]: info: :
error: 7 errors and/or warnings.
hp-check[3365]: info: :
hp-check[3365]: info: :Please refer to the installation instructions at:
hp-check[3365]: info: :http://hplip.sourceforge.net/install/index.html

hp-check[3365]: info: :
hp-check[3365]: info: :Done.

-------
amandine@vital:~$ ping 192.168.10.10
PING 192.168.10.10 (192.168.10.10) 56(84) bytes of data.
64 bytes from 192.168.10.10: icmp_seq=1 ttl=255 time=9.64 ms
64 bytes from 192.168.10.10: icmp_seq=2 ttl=255 time=0.220 ms
^C
--- 192.168.10.10 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 0.220/4.931/9.643/4.712 ms






Alors, pour commencer, il faut lancer lynx pour accéder à l'interface de
gestion.

Dans une console, lynx http://127.0.0.1:631

amandine@vital:~$ lynx http://127.0.0.1:631

Recherche 127.0.0.1:631
Connexion HTTP Ã  127.0.0.1:631
Alerte! : Impossible d'établir une connexion à l'hôte distant.

lynx : accès impossible au fichier de départ http://127.0.0.1:631/


La page s'affiche, il faut choisir "Administration"->"Add printer"
Il demande le nom, c'est le nom court de l'imprimante (par ex HP4500) qui
est son identifiant pour la gestion. Les 2 autres lignes c'est juste de
l'information.

Page suivante, choix du "device", donc dans ton cas, socket sur port
9100.
Il faut choisir "AppSocket/HP JetDirect".

Page suivante, adresse du "device", donc sur socket il faut entrer
socket://192.168.10.10:9100 et on valide.

Page suivante, choix de la marque du fabricant, ici HP.

Page suivante, choix du modèle parmi les pilotes disponibles, il faut
bien
selectionner le bon pilote parmi la liste et c'est la qu'intervient la
couche hplip qui propose ses pilotes.

et voila c'est presque prêt, il ne faut pas oublier de configurer les
options d'impression par défaut avec "Printers"->"Set printer options"

tu retrouveras toutes ces informations dans le fichier
/etc/cupsd/printers.conf

A noter que l'interface sera en français si l'environnement est installé
en
français évidemment.

tu peux utiliser un navigateur graphique si tu as un serveur X sur ta
machine cliente. Je fais ma gestion à distance sur mon poste linux via
ssh
et firefox.

Bonjour,

Pour que lynx puisse se connecter au serveur d'impression, il faut qu'il
soit lancé, il semble que cela ne soit pas le cas ...


hp-check[3365]: info: :[01mChecking for CUPS...[0m
error: Status: (Not available. CUPS may not be installed or not running.)

la commande "ps -edf | grep cupsd" doit confirmer que le daemon "cupsd"
tourne.

$ ps -edf | grep cupsd
root      3377     1  0 10:14 ?        00:00:00 /usr/sbin/cupsd
amandine   3384  3139  0 10:16 pts/0    00:00:00 grep cupsd



il faut lancer lynx en tant qu'utilisateur membre du groupe lp, en root,
l'accès est refusé par défaut.

quel est le résultat de la commande 'dpkg -l | grep cups' ? et 'dpkg -l |
grep hplip' ?

$ dpkg -l | grep cups
ii  cups                              1.3.10-2
 Common UNIX Printing System(tm) - server
ii  cups-client                       1.3.10-2
 Common UNIX Printing System(tm) - client pro
ii  cups-common                       1.3.10-2
 Common UNIX Printing System(tm) - common fil
ii  cups-driver-gutenprint            5.2.3-0ubuntu5
 printer drivers for CUPS
ii  cupsddk                           1.2.3-5ubuntu1
 CUPS Driver Development Kit
ii  cupsddk-drivers                   1.2.3-5ubuntu1
 CUPS Driver Development Kit - Driver files
ii  cupsys                            1.3.10-2
 Common UNIX Printing System (transitional pa
ii  cupsys-driver-gutenprint          5.2.3-0ubuntu5
 Transitional package
ii  libcups2                          1.3.10-2
 Common UNIX Printing System(tm) - libs
ii  libcupsimage2                     1.3.10-2
 Common UNIX Printing System(tm) - image libs

$ dpkg -l | grep hplip
ii  hplip                             3.9.4b-0ubuntu1
 HP Linux Printing and Imaging System (HPLIP)
ii  hplip-data                        3.9.4b-0ubuntu1
 HP Linux Printing and Imaging - data files



il ne faut pas se décourager, juste avancer pas après pas :)

j'essaie, mais quand on teste plusieurs fois, y a de quoi parfois être
découragé :(

Amandine



Pour avoir les commandes du style "lpstat" il te faut le paquet 'cups-bsd'.
Tu peux supprimer les paquets 'cupsys' et 'cupsys-driver-gutenprint' qui ne sont plus utilisés.
Le reste à l'air bon (a part le fait que ce sont des paquets non-stable) , est ce que tu as les paquets 'foomatic-db', 'foomatic-db-engine' et/ou 'foomatic-filters' ?
Puisque 'cupsd' tourne, tu dois pouvoir lancer 'lynx http://127.0.0.1:631' ... 

Rodolphe
Reply to: