kaliderus a écrit :
Salutations, Le 21 avril 2009 16:13, steve <dlist@bluewin.ch> a écrit :Me réponds à moi-même et pour les archives. Les données sont lue dans /sys/class/hwmon/*sensors ne fait que remettre en forme ce qui est dans ce répertoire (et certains autres j'immagine), ou est ce qu'il y a une valeur ajoutée autre ? Au passage, j'utilise la même plate-forme, sais-tu si il existe un mécanisme interne au processeur pour se bloquer en cas de surchauffe ? La doc technique d'AMD ne m'a pas aidé (ou je ne suis pas tombé sur la bonne).
Dans la configuration du noyau et la documentation tu peux rechercher :- CONFIG_ACPI_THERMAL:
This driver adds support for ACPI thermal zones. Most mobile and some desktop systems support ACPI thermal zones. It is HIGHLY recommended that this option be enabled, as your processor(s)
may be damaged without it.- CONFIG_SENSORS_CORETEMP:
If you say yes here you get support for the temperature sensor inside your CPU. Supported all are all known variants
of Intel Core family.- CONFIG_SENSORS_K8TEMP: If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported is whole AMD K8 microarchitecture. Please note that you will need at least
lm-sensors 2.10.1 for proper userspace support.- CONFIG_THERMAL: Generic Thermal Sysfs driver offers a generic mechanism for thermal management. Usually it's made up of one or more thermal zone and cooling device.
Each thermal zone contains its own temperature, trip points, cooling devices. All platforms with ACPI thermal support can use this driver. If you want this support, you should say Y or M here.
- CONFIG_THERMAL_HWMON: The generic thermal sysfs driver's hardware monitoring support requires a 2.10.7/3.0.2 or later lm-sensors userspace.
-- ============================================== | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frederic@juliana-multimedia.com | ===========================Debian=GNU/Linux===