[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Pb xorg et i965 en widescreen

Bonjour,

Je cherche une solution à un curieux problème...
J'ai un portable Asus U1, le circuit vidéo est un intel GM965 et l'écran est un widecreen 1280x800... Le serveur X fonctionne mais il me détecte 2 écrans (un de 1024x768, l'autre "inconnu" !!!) et mon écran est géré par xinerama pour 2/3 - 1/3... Pour une utilisation bureautique c'est pas trop gênant, mais pour passer des films, c'est carrément problématique (c'est un écran de 12,1" et avoir une bande sur le coté droit c'est triste ! )....
J'ai essayer de faire quelque modifs dans le xorg.conf, mais sans vraiment de succès !
Ci-joint mes 2 xorg, celui généré à l'installation (xorg.conf.ori) et celui que j'ai modifié en ajoutant les résolutions de l'écran... 

Si quelqu'un à une idée, ce serait génial !...

Merci

Mourad

--
Membre de l'April - « promouvoir et défendre le logiciel libre » - http://www.april.org
Rejoignez maintenant plus de 2 500 personnes, associations, entreprises et collectivités qui soutiennent notre action 
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizEdgeScroll"	"0"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Driver		"intel"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x800"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x800"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Synaptics Touchpad"
EndSection

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"fr"
	Option		"XkbVariant"	"oss"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"auto-dev"
	Option		"HorizEdgeScroll"	"0"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Synaptics Touchpad"
EndSection
Reply to: