Le samedi 23 août 2008 11:31, Jean-Yves F. Barbier a écrit : > Alain Vaugham a écrit : > > Bonjour la liste > > > > Pourquoi ce message apparaît avec certains programmes mais pas pour > > d'autres? > > > > Merci d'avance. > > apparemment ton HD part en sucette Effectivement, un "aptitude install même-programme" sur une autre machine Etch ne provoque pas ce message d'erreur. D'après cette conversation de mardi dernier : http://lists.debian.org/debian-user-french/2008/08/msg00366.html il est possible d'évaluer la fin de vie du disque mais je ne sais pas interpréter ces résultats chez moi. Quelqu'un peut m'éclairer succintement? # smartctl -l error /dev/hda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Error Log Version: 1 ATA Error Count: 34 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 34 occurred at disk power-on lifetime: 65 hours (2 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 01 00 00 a0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 01 00 00 a0 00 00:01:47.064 READ DMA c6 00 10 01 00 00 af 00 00:01:47.057 SET MULTIPLE MODE 91 00 3f 01 00 00 af 00 00:01:46.614 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 01 01 00 00 a1 00 00:01:46.614 RECALIBRATE [OBS-4] 00 00 01 00 00 00 00 04 00:01:46.614 NOP [Abort queued commands] Error 33 occurred at disk power-on lifetime: 65 hours (2 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 01 00 00 a0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 01 00 00 a0 00 00:01:47.064 READ DMA c6 00 10 01 00 00 af 00 00:01:47.057 SET MULTIPLE MODE 91 00 3f 01 00 00 af 00 00:01:46.614 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 01 01 00 00 a1 00 00:01:46.614 RECALIBRATE [OBS-4] 00 00 01 00 00 00 00 04 00:01:46.614 NOP [Abort queued commands] Error 32 occurred at disk power-on lifetime: 65 hours (2 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 01 00 00 a0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 01 00 00 a0 00 00:01:05.263 READ DMA c6 00 10 01 00 00 af 00 00:01:05.262 SET MULTIPLE MODE 91 00 3f 01 00 00 af 00 00:01:46.614 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 01 01 00 00 a1 00 00:01:46.614 RECALIBRATE [OBS-4] 00 00 01 00 00 00 00 04 00:01:46.614 NOP [Abort queued commands] Error 31 occurred at disk power-on lifetime: 65 hours (2 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 01 00 00 a0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 01 00 00 a0 00 00:01:05.263 READ DMA c6 00 10 01 00 00 af 00 00:01:05.262 SET MULTIPLE MODE 91 00 3f 01 00 00 af 00 00:01:05.262 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 01 01 00 00 a1 00 00:01:05.210 RECALIBRATE [OBS-4] 00 00 00 00 00 00 00 04 00:01:05.210 NOP [Abort queued commands] Error 30 occurred at disk power-on lifetime: 65 hours (2 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 01 00 00 a0 Error: ICRC, ABRT 1 sectors at LBA = 0x00000001 = 1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 01 00 00 a0 00 00:00:36.639 READ DMA c6 00 10 01 00 00 af 00 00:00:36.639 SET MULTIPLE MODE 91 00 3f 01 00 00 af 00 00:00:36.639 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 00 01 01 00 00 a1 00 00:00:36.639 RECALIBRATE [OBS-4] 00 00 01 00 00 00 00 04 00:00:36.631 NOP [Abort queued commands] -- Cordialement, Alain Vaugham -------------------------------------------------------- [PUB] Signature numérique GPG de ce courrier: 0xD26D18BC
Attachment:
pgp5nLdkW1SaR.pgp
Description: PGP signature